5914ae08f9
Recognize BCM5702X and BCM5703X. Add a ONLY_PHY_1 quirk and use it.
...
Add support for getting the macaddr for 5703 (taken from FreeBSD).
2002-12-26 20:55:30 +00:00
e367c94b9c
Do not try to print uninitialized variable.
2002-10-06 23:34:56 +00:00
b75a007d9f
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:51:16 +00:00
387fc6dc87
Use CFATTACH_DECL().
2002-09-30 20:37:04 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
395027b4be
Correct obviously switched args to memset()
2002-07-18 02:07:13 +00:00
7ba40961d6
Add a BGE_QUIRK_CSUM_BROKEN quirk, and give it to BCM5700 B0, rather
...
than testing for the revision all over the driver. If the chip has
broken checksums, then don't advertise the capability to the stack.
2002-07-13 22:48:40 +00:00
0ff52204b9
Give BCM5700 Ax and Bx revs the BGE_QUIRK_LINK_STATE_BROKEN quirk,
...
and test for that, rather than checking revision where the quirk is
handled.
2002-07-13 22:31:18 +00:00
dcebb2bf0d
Add a lookup table with ASIC revision, name, and any quirks. Print
...
ASIC revision at attach time. Add BCM5703 revisions.
2002-07-13 22:21:20 +00:00
7d85789f0a
Move the BCM5401 DSP patch out of the bge driver and into
...
the brgphy driver; all users of the BCM5400 and BCM5401 need
the DSP patch and the sledgehammer-reset-at-media-set-time.
Also add a DSP patch for the BCM5411 gleaned from Apple's
GMAC driver for Darwin.
Tested with a 3Com 3c996-T (BCM5700 + BCM5401).
2002-07-13 01:23:27 +00:00
f216ec52a0
Match Altima AC1001.
2002-07-12 22:29:14 +00:00
7ff40c446d
Fix multicast filter programming.
2002-07-01 22:42:47 +00:00
969b2f1817
Fix a comment.
2002-06-28 18:46:46 +00:00
9066ce1621
When stopping the various functional blocks of the chip, clear the
...
bit and then read it back in a loop (with appropriate delays) waiting
for it to read back clear.
This fixes a problem where the bus would hang when bringing down
the interface or changing interface flags on a system with a
sufficiently fast CPU (e.g. 2GHz P4 Xeon).
2002-06-28 18:44:45 +00:00
50ade28e9b
Rearrange alignment code a bit.
2002-06-28 18:39:45 +00:00
6abec8e2a2
Increase previously added delays from 2us to 10us.
2002-06-28 01:10:06 +00:00
90bf67b885
* Only set the jumbo frame capability if we are able to allocate
...
jumbo frame buffers.
* Garbage-collect some stuff we don't need.
* Fix timeout detection in the firmware handshake.
2002-06-28 00:55:20 +00:00
7778c16e7c
Use a table to match BCM570x products.
2002-06-27 23:56:20 +00:00
b7af161065
Don't call m_aux_find() in the inner loop when creating the Tx
...
descriptor list. Instead, call it once and remember the result,
and only call it looking for VLAN tags if VLANs are configured
on the interface.
2002-06-27 23:21:34 +00:00
68be8ecae4
Put some delay in the loops that poll for MII transaction
...
completion. Without this, reading the PHY can hang the bus
on a sufficiently fast CPU.
2002-06-27 22:31:30 +00:00
8a454b46d0
Disable TCP/UDP checksums on the receive side again.
2002-06-27 22:10:11 +00:00
6f2291b427
Match newer NetGear GA302T cards.
2002-06-26 10:48:18 +00:00
dd96b79d02
According to the Linux driver from Broadcom, only the 5700 B0 revision had
...
rx checksum problems. So only disable rx checksum for that revision.
2002-06-24 01:23:11 +00:00
b04a6fd69c
Driver for Broadcom 570x / Altima AC 1000 gigabit ethernet cards.
...
Written by Bill Paul for FreeBSD. This port started out with the
port done to OpenBSD by nate@openbsd.org , but ended up looking much
more like the port of the ti driver done by drochner@netbsd.org
(they are similar in structure).
2002-06-22 14:42:07 +00:00
matt