soren
6ade619f58
Regen.
2000-09-04 20:44:37 +00:00
soren
176549d557
Add Intel 440GX host bridge.
2000-09-04 20:30:50 +00:00
soren
fe2b627962
Fix 'RAID unsupported' printf.
2000-09-04 20:21:30 +00:00
soren
ac5ac55b06
Add support for the AAA-131 RAID controller by treating it as a 7890.
...
Taken from rev 1.32 of the FreeBSD ahc_pci.c.
2000-09-04 19:56:04 +00:00
itojun
824ddfd20e
regen
2000-09-04 13:13:36 +00:00
itojun
4f6829605c
Brooktree Bt8474 Multichannel Synchronous Communictaions Controller (MUSYCC)
2000-09-04 13:13:14 +00:00
itohy
572e9e2f80
Move ym_mixer_set_port() (if used) during attach AFTER initialization of
...
power ctl stuff, or it makes unwanted changes to the CODEC settings.
2000-09-04 00:57:17 +00:00
augustss
5cf4edb506
Handle output packet headers in a cleaner way. From IWAMOTO Toshihiro
...
<iwamoto@sat.t.u-tokyo.ac.jp>, fixes kern/10573.
2000-09-03 19:15:45 +00:00
augustss
b2af314f55
Add a few more defines. From Nick Hibma and FreeBSD.
2000-09-03 19:09:14 +00:00
wiz
c384f772f0
remove one
2000-09-03 02:05:44 +00:00
wiz
3a2e8fdc05
Use NetBSD's pcidevs file for vendors/cards as much as possible.
...
Recognize Pinnacle Studio PCTV Rave as Miro card, tested by rh@netbsd.org .
2000-09-03 02:01:32 +00:00
cgd
cfd89531b4
don't attempt to size Host Bridge BARs. (it's a good way to die.)
...
provide a clue about 16-bit vs. 32-bit I/O BARs.
2000-09-02 00:48:20 +00:00
cgd
6a22a36219
regen for changed pcidevs
2000-09-02 00:33:25 +00:00
cgd
dae6b41d27
after discussion with veego, rename constant for 3D Labs Permedia 2 from
...
PERMEDI2 to PERMEDIA2. (substance over style. 8-) Also, fix a typo
I noticed in a comment.
2000-09-02 00:32:15 +00:00
eeh
0d01e04003
Add support for write protecting clock registers.
2000-09-01 19:04:49 +00:00
ad
ec322f95aa
Regen.
2000-09-01 17:19:36 +00:00
ad
6dd2f101ad
Et763 -> Bt763
2000-09-01 17:19:25 +00:00
ad
e9bc438c50
- Simplify eisa_devinfo().
...
- New KNF.
2000-09-01 17:18:20 +00:00
drochner
641326ee44
-fix multicast filter programming
...
-support access to MII_ANER too for completeness
-remove some hacks which disappeared in FreeBSD if_rl.c
rev. 1.25 (Aug 31 14:45:49 1999)
(the driver could need more updating, but this is what I've tested
for months)
2000-09-01 15:07:23 +00:00
ad
f729f26133
FLUSH_CACHE will not return until complete.
2000-09-01 14:17:15 +00:00
ad
40f6cd2b96
The `cac' driver now frees CCBs on our behalf.
2000-09-01 12:23:57 +00:00
ad
688e72faf1
Add an EISA bus front-end for the `cac' driver.
2000-09-01 12:15:20 +00:00
ad
702747900f
- Interface cleanup. static, const in places.
...
- cac_pci_l0 has been moved to cac.c, since it's useful for EISA boards.
- Model-specific linkage now is responsible for DMA synchronization.
- If we don't recognise the board, print the subsystem ID.
- Add support for RAID LC2 and Smart Array 431.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:13:08 +00:00
ad
671d7f91ae
- Interface cleanup. static, const in places.
...
- Move convenience macros from cacreg.h to cacvar.h.
- Add one hardware check in DIAGNOSTIC case.
- Declare `cac_l0'.
2000-09-01 12:12:29 +00:00
ad
ac2883e218
- Interface cleanup. static, const in places.
...
- Pull in linkage useful for both PCI and EISA boards from cac_pci.c.
- cac_ccb_done() now frees the done CCB if the CCB callback completes.
- Model-specific linkage is now responsible for DMA synchronization.
- Use wakeup_one() in cac_ccb_free().
- Start synchronous commands `manually'.
- Add one hardware check in DIAGNOSTIC case.
- Improve error messages.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:11:37 +00:00
ad
d8e5466776
- Move convenience macros from cacreg.h to cacvar.h.
...
- Define EISA board register set and some other magic numbers.
- Add missing elements to `struct cac_controller_info'.
2000-09-01 12:10:21 +00:00
jdolecek
0bc8e23c3a
even through the integrated audio on my MSI 694D Pro
...
does not set AC97_CODEC_DOES_VRA in AC97_REG_EXT_AUDIO_ID request, it
works okay; only require the bit set for revision < 'H'
2000-09-01 00:02:04 +00:00
haya
ea9ef4ff69
Correct LED polarity bit. This bit and PHY power bit should be
...
defined in elinkxlreg.h.
2000-08-31 08:42:29 +00:00
haya
25147761ff
Add support 3C[CX]FE575CT.
2000-08-29 08:54:50 +00:00
wiz
4739c00231
regen
2000-08-29 01:18:17 +00:00
wiz
52454a3dd6
add vendors HAUPPAUGE, ASKEY, AVERMEDIA
2000-08-29 01:17:06 +00:00
jdolecek
a020e8fbb5
regen
2000-08-28 17:44:33 +00:00
jdolecek
8b242e878a
add entry for SupraExpress 56i Sp V.90, as sent in kern/10902
2000-08-28 17:43:59 +00:00
joda
00305bb997
provide some randomness
2000-08-28 13:25:22 +00:00
haya
403941c60d
Regen to correct wrong keyword.
2000-08-28 10:35:59 +00:00
haya
7591b1332b
Correct wrong keyword.
2000-08-28 10:33:58 +00:00
haya
128fa6e8fb
Correct PCI interrput setup routine for Texas Instruments PCI113X.
...
Now PCI113X is able to handle hot insertion and deletion properly.
2000-08-28 09:26:38 +00:00
haya
21ddff737c
Regen.
2000-08-28 09:18:09 +00:00
haya
86063b7c73
Add 3Com 3C656 LAN + MODEM CardBus cards.
2000-08-28 08:59:49 +00:00
mjacob
37c83e1340
fix some missing initializations
2000-08-27 21:43:26 +00:00
eeh
194bbc3c5d
Don't bcopy() from luserland.
2000-08-26 20:08:22 +00:00
eeh
a0f2ab32f7
Make 64-bit clean.
2000-08-26 16:02:06 +00:00
jhawk
ce7a425d77
Revert last, softc is now updated.
...
I neglected to checkin the if_wivar.h update earlier, sorry.
2000-08-26 00:08:43 +00:00
jhawk
a44862dea9
oops, missed this file earlier (Doh!):
...
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-26 00:05:54 +00:00
haya
0e2c6c0cc1
Access on ELINK_W3_INTERNAL_CONFIG register with 32-bit mode. Remove
...
16-bit access code. This register is 32-bit. 16-bit access with the
register causes data inconsistency (especially for CardBus cards).
2000-08-25 09:01:59 +00:00
jeffs
d3afa878a2
Fix typo in SIATXRX_SPP comment.
2000-08-25 08:03:10 +00:00
sommerfeld
3a2b5d49a6
partial backout of last commit: #if 0 references to sc->wi_mor_enabled
...
since it doesn't exist in the softc.
2000-08-25 03:11:14 +00:00
nathanw
5127aa189d
In fdioctl(), allocate fd_formb dynamically when needed, rather than on
...
the stack, and remove the no-longer-necessary PHOLD()/PRELE() calls
in fdformat().
(This eliminates 1/3 of the instances of PHOLD()/PRELE() in the kernel code.)
XXX We still have too many mostly-redundant floppy drivers.
2000-08-24 20:04:28 +00:00
augustss
cf4250b7f3
Add UKBD_DEBUG.
2000-08-24 14:13:38 +00:00
augustss
fa9cfe5e39
Removed unnecessary variable declaration.
2000-08-24 14:12:34 +00:00