1) RFC2367 says in 2.3.3 Address Extension: "All non-address
information in the sockaddrs, such as sin_zero for AF_INET sockaddrs,
and sin6_flowinfo for AF_INET6 sockaddrs, MUST be zeroed out."
the IPSEC_NAT_T code was expecting the port information it needs
to be conveyed in the sockaddr instead of exclusively by
SADB_X_EXT_NAT_T_SPORT and SADB_X_EXT_NAT_T_DPORT,
and was not zeroing out the port information in the non-nat-traversal
case.
Since it was expecting the port information to reside in the sockaddr
it could get away with (re)setting the ports after starting to use them.
-> Set the natt ports before setting the SA mature.
2) RFC3947 has two Original Address fields, initiator and responder,
so we need SADB_X_EXT_NAT_T_OAI and SADB_X_EXT_NAT_T_OAR and not just
SADB_X_EXT_NAT_T_OA
The change has been created using vanhu's patch for FreeBSD as reference.
Note that establishing actual nat-t sessions has not yet been tested.
Likely fixes the following:
PR bin/41757
PR net/42592
PR net/42606
"initializing IPsec..."" done" is of somewhat limited value.
(I normally wouldn't care; but on my box the (root) uhub(4)s attach
between the first and last portion of the line.)
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
- Socket layer becomes MP safe.
- Unix protocols become MP safe.
- Allows protocol processing interrupts to safely block on locks.
- Fixes a number of race conditions.
With much feedback from matt@ and plunky@.
(actually splnet) and condvars instead of tsleep/wakeup. Fix a few
miscellaneous problems and add some debugging printfs while there.
Restore set of CRYPTO_F_DONE in crypto_done() which was lost at some
point after this code came from FreeBSD -- it made it impossible to wait
properly for a condition.
Add flags analogous to the "crp" flags to the key operation's krp struct.
Add a new flag, CRYPTO_F_ONRETQ which tells us a request finished before
the kthread had a chance to dequeue it and call its callback -- this was
letting requests stick on the queues before even though done and copied
out.
Callers of crypto_newsession() or crypto_freesession() must now take the
mutex. Change netipsec to do so. Dispatch takes the mutex itself as
needed.
This was tested fairly extensively with the cryptosoft backend and lightly
with a new hardware driver. It has not been tested with FAST_IPSEC; I am
unable to ascertain whether FAST_IPSEC currently works at all in our tree.
pjd@FreeBSD.ORG, ad@NetBSD.ORG, and darran@snark.us pointed me in the
right direction several times in the course of this. Remaining bugs
are mine alone.
Only record an IPSEC_OUT_DONE tag when we have finished the processing
In ip{,6}_output, check this tag to know if we have already processed this
packet.
Remove some dead code (IPSEC_PENDING_TDB is not used in NetBSD)
Fix pr/36870
in IPsec processing that is dependent on protocol and/or port can be bypassed.
Bug report, analysis and initial fix from Karl Knutsson.
Final patch and ok from degroote@
