* Add IPL_HIGH. Alias IPL_HIGH to IPL_RTTY
* Define splrtty (used by the scn driver).
* Add iv_level and iv_mask to struct iv. These define the IPL at
which the handler should run.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Define SCN_RING_HIWAT and add sc_rbhiwat to scn_softc. When the
ringbuffer gets full up to this mark, rts gets asserted (Ian Dall).
* Add sc_rx_blocked to scn_softc. This is used to tell scnsoft that
rxinterrupts are blocked (Ian Dall).
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
All the following changes were provided by Ian Dall:
* Remove SCN_HSOFT. Now that the pc532's software interrupt system is running
from int14, this won't work anymore.
* Add code to detect uart type (SCN2681, SCC2692 or SCC26C92).
* Cleanup my RECOVER mess. Thank's to Ian Dall for reading the datasheet
and removing all the unnecessary RECOVERs.
* Cleanup scnrxintr.
* Implement scnhiwflow.
* Do not use automatic RTS. This and scnhiflow and some changes to the
interrupt system suggested by Ian fix the scn overrun problem at 57600
baud.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Make transfersize configurable for input and output. Default the input
transfersize to 128 bytes. That way interrupts won't be disabled for more
then about 128us-256us for slow targets. This is necessary to prevent scn
fifo overruns. Cleanup the pdma code. Thank's to Ian Dall for these
changes.
* Make it work on 30mhz machines.
* Configure MSDOSFS, CD9660, KERNFS, NFSCLIENT and INET.
* Configure SCSI-cds, slip and ppp.
* Update for mi ramdisk driver.
* Initialize iv_level for all interrupts.
* Protect the call to the sir-handler with splraise.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Compute iv_mask for all interrupts in intr_establish.
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
* Support for the new softint mechanism. Softints are now requested by
triggering an unused ICU hardware interrupt. The idea for this was
contributed by Phil Budne.
* Real probe code added.
* Duart info is now allocated only for devices that are present.
* Added IO-Recovery delays for 30mhz systems.
* Removed a few potential NULL-pointer references.
* Only FFS is needed for the install kernel.
* Configure the console to 8N1 (that's what the pc532's rom monitor uses).
* The install kernel doesn't need to know about CDROM drives.
* Use the new mi ramdisk.
* New patchable variable maxphysmem to limit physical memory.
That's useful to simulate small machines for testing install
kernels.
* Make debugging crashdumps with gdb -k work.
* microtime is moved to clock.c.
* Reserve memory for symbol table when ddb is configured.
* Move checks for RB_KDB into consinit.
* Fix a typo in delay().
* Disable generation of profiling prologue for proc_trampoline,
sigcode, idle, handle_trap, flush_icache, svc and interrupt.
* A few tweaks to make kgdb and ddb work nicer.
* Support for bpf added.
* Don't duplicate code, use ether_ifattach instead.
* Recode plipreceive and pliptransmit in assembler.
This improves performance from 40 kbyte/s to 50 kbyte/s
between a 30mhz pc532 and a 25mhz i386.
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
Several had: _MACHINE_ICU_H_ -> _NS32K_ICU_H_
cpu.h * Removed definition of cpu_swapout.
* Added definition of cpu_wait.
frame.h * added struct switchframe
icu.h * tweeked ints_off
param.h * More derived constants.
* Alot of things taken over from i386/include/param.h.
pcb.h * Removed pcb_flags (was unused) and pcb_pl.
The current priority level is now stored
in the switch frame by cpu_switch.
pmap.h * Taken over from i386/include/pmap.h.
psl.h * Add USERMODE definition
trap.h * T_INTERRUPT -> T_AST
types.h * Remove __FORK_BRAINDAMAGE
vmparam.h * Taken over from i386/include/vmparam.h.
Added definition of INTSTACK.
clock.c * Removed definition of DELAY.
intr.c * Removed an unneeded $Id:....$
locore.s * Moved some of the low level initialization
code to machdep.c.
* Defined proc_trampoline.
* Changed sigcode to pass scp to SYS_sigreturn.
* Changed copyin/copyout/fu*/su* to take advantage
of the ns32532's dual address instructions.
* Recoded copyinstr/copyoutstr/copystr in assembler.
* Added a new and faster version of bzero.
This makes bzero.s unnecessary.
* Defined suswintr to make profiling work.
* Recoded cpu_switch modelled after the i386
version of cpu_switch.
* Added support for lazy fpu state restore to
cpu_switch.
* Recoded trap handling code to be more readable.
* Added experimental code for single cacheline
invalidation.
machdep.c * Copied over cpu_startup from i386/i386/machdep.c.
* Changed sys_sigreturn to take advantage of the
argument passed by the trampoline code.
* Changed boot to call doshutdownhooks and to store
machine state in case of a panic.
* Changed setregs to clear the fpu registers.
* Recoded low_level_init. It's now called init532.
* cpu_reset: New function, resets the machine.
trap.c * Pulled over from i386/i386/trap.c.
* Added support for lazy saved/restored fpu state.
vm_machdep.c * Removed kstack double mapping by pulling over alot
of code from i386/i386/vm_machdep.c.
* Added support for lazy saved/restored fpu state.
* Moved freeing of process resources from cpu_wait
to cpu_exit.
* Pulled over cpu_coredump, pagemove, vmapbuf and
vunmapbuf from i386/i386/vm_machdep.c.
pmap.c * Pulled over from i386/i386/pmap.c.
genassym.c * Removed old and unused definitions, added new ones.
sys_machdep.c * Moved sys_sysarch from machdep.c to sys_machdep.c.
process_machdep.c * Changed to work without ktack double mapping.
* Changed to work with lazy saved/restored fpu state.
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
not splx, but rett is now used to reenable CPU interrupts when leaving the
interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000
