joerg
a790b941e6
Make cpu_idle a macro calling a function pointer on x86.
...
Select the Xen idle routine for Xen, mwait if supported by the CPU and
it is not AMD and halt otherwise. As reported by Christoph Egger,
AMD Barcelona keeps the CPU in C0 state with MWAIT, contrary to HLT,
which uses C1 and therefore much less power.
2008-05-09 18:11:28 +00:00
christos
7f928c07fa
add more errors from gleaning the source.
2008-05-09 15:52:50 +00:00
tsutsui
f519863871
Split softc/device_t, with misc related changes.
2008-05-09 10:59:55 +00:00
tsutsui
6eaaf9f4bd
If writing the primary boot fails with EROFS, use DIOCWLABEL ioctl
...
then try again because some ports have to overwrite LABELSECTOR
which might be protected by bounds_check_with_label(9) on putting
primaty bootxx.
2008-05-09 10:53:55 +00:00
tsutsui
a9e4cec8d9
Use DIOCWLABEL ioctl before writing block 0 which might be
...
protected by (now MI) bounds_check_with_label(9).
Fixes a problem on sysinst mentioned in PR port-macppc/38016.
2008-05-09 10:14:35 +00:00
tsutsui
dba35d8b76
CFATTACH_DECL() -> CFATTACH_DECL_NEW(), botched in rev 1.14.
2008-05-09 10:09:27 +00:00
wiz
04845dabb5
Assign to TNF. Make 2-clause instead of 3.
...
Ok: co-copyright owner hubertf@.
2008-05-09 08:31:13 +00:00
rumble
552b98b94b
Fix compilation with DEBUG_NFS_BOOT_DHCP and ssp.
2008-05-09 06:20:39 +00:00
rumble
7e3d192596
Nix a tautological return introduced in 1.129.
2008-05-09 06:08:19 +00:00
dyoung
de7ae11c56
Use the correct key. Spotted by NONAKA Kimihiro.
2008-05-09 04:46:50 +00:00
jmcneill
e1557cc154
Use 2-clause license.
2008-05-09 03:44:51 +00:00
macallan
042c09add2
move to 2 clause license
2008-05-09 03:12:49 +00:00
matt
4c3e78343a
Add KERNEL_BASE_EXT=0xc0000000 to those plaforms that need it.
...
Note that armv6 and later systems will use 0x80000000 as the kernel start
so they can use the split TTBs in armv6 and later.
2008-05-09 00:08:37 +00:00
sborrill
f8596645f3
Add support for IBM ServeRAID 8k.
...
Fix some grammatical errors
2008-05-08 19:09:33 +00:00
ad
541e4662f9
- Add tc_gonebad(): allows timecounter to be flagged as bad and removed at
...
the next clock tick.
- Remove time_lock, which is no longer required.
2008-05-08 18:56:58 +00:00
macallan
3b2abbc7b0
add ttyE1-3
2008-05-08 16:15:05 +00:00
tsutsui
a48fac26d7
vt100 is better than unknown for ttyZ[01].
2008-05-08 16:03:09 +00:00
wiz
34d9ab928a
No need to explicitly mention my name here any longer.
2008-05-08 15:36:35 +00:00
wiz
c75bafc005
2-clause my license.
2008-05-08 15:34:21 +00:00
sborrill
b3f8753a81
Regen
2008-05-08 15:34:15 +00:00
sborrill
cfe5fff059
Add support for IBM ServeRAID 8k (and 8k-l)
2008-05-08 15:33:34 +00:00
wiz
ac20026091
2-clause my license.
2008-05-08 15:31:07 +00:00
lukem
2713f76747
Convert getnetbyname(3) and getnetbyaddr(3) to the more "standard"
...
nsdispatch() backend method API.
2008-05-08 13:01:42 +00:00
reinoud
ffc24fca06
Implement write support for the MMC framework. This consists of a setting
...
up of write parameters call and a call to perform a series of operations on
these devices.
Note that the MMC framework interface is still not exposed to userland
unless the expose_mmc flag is set. This is to prevent applications to build
on a possibly still moving target. This flag will eventually be removed.
2008-05-08 12:57:19 +00:00
lukem
d8aac84366
Fix a misuse of an automatic as a static that was exposed by the previous.
2008-05-08 12:26:55 +00:00
manu
2a499f37b6
From Christian Hohnstaedt: allow out of tree building
2008-05-08 12:24:50 +00:00
joerg
1fe12cbbc8
Add support for 3ware 9650 and 9690 based on patches contributed by
...
Wasabi Systems.
Fix bus_dma usage to fix write operations in the light of bounce buffers.
Use the 64bit bus_dma tag for 9550+ to avoid bouncing buffers.
2008-05-08 11:27:54 +00:00
taca
fd376618e5
Make sure to clear csum_flags before forward the packet.
...
This change should be fix DIAGNOSTIC kernel's panic when the machine act
as multicast router.
Advised from tls@ and approved by thorpej@.
2008-05-08 08:00:55 +00:00
dyoung
44e2875450
Move IPv4/IPv6-specific code from commit_address() to in_commit_address()
...
and in6_commit_address(). Fixes the USE_INET6=no build.
2008-05-08 07:13:20 +00:00
dyoung
cbb2531719
Delete #if 0'd code.
2008-05-08 07:11:03 +00:00
dyoung
43545a233c
Don't use -pedantic, it stops af_atalk.c and af_iso.c from building
...
if INET_ONLY is #defined.
2008-05-08 07:09:18 +00:00
lukem
6e5e2748b3
Fix DNS getnetbyname(), which has been broken for at least 5.5 years
...
(if not longer).
2008-05-08 05:06:18 +00:00
macallan
1da90a4ef8
nuke clause 3
2008-05-08 02:32:48 +00:00
macallan
8f2f09b987
nuke clause 3 & 4
2008-05-08 02:16:27 +00:00
jmcneill
34fba0e3ad
Use 2-clause license.
2008-05-08 02:10:59 +00:00
macallan
92b89da10e
nuke clause 3
2008-05-08 02:03:22 +00:00
macallan
346d21c906
nuke clause 3
2008-05-08 01:43:17 +00:00
macallan
757fd24b0c
nuke license clause 3
2008-05-08 01:37:04 +00:00
macallan
e24aaf48e7
report chip revision
2008-05-08 01:36:03 +00:00
macallan
343b964931
magic number reduction
...
from Izumi Tsutsui
2008-05-08 01:27:43 +00:00
dyoung
8c460289fe
Factor out common code, creating direct_ioctl() and indirect_ioctl()
...
for the two most prevalent styles of ioctl(2) calls in ifconfig(8).
2008-05-07 23:55:06 +00:00
dyoung
db80154181
Remove CPPFLAGS that are redundant when WARNS=4.
2008-05-07 22:07:24 +00:00
ad
05b982d1c7
mfs doesn't need fsync.
2008-05-07 21:30:42 +00:00
gdt
6231d15c35
Remove gzipped kernel file just before running gzip >, avoiding
...
permission errors in unprivileged builds using a pre-existing
releasedir.
2008-05-07 21:30:26 +00:00
dyoung
71b48a4b36
Move IPv6 syntax to af_inet6.c from ifconfig.c. Move IFKW() macro
...
from ifconfig.c to parse.h for reuse.
2008-05-07 21:29:27 +00:00
dyoung
8a08b505d5
Move ISO, AppleTalk, carp(4) syntax from ifconfig.c to af_iso.c,
...
af_atalk.c, carp.c, respectively.
2008-05-07 20:45:01 +00:00
dyoung
e3cf2a1157
Sprinkle 'static const' on keyword objects.
2008-05-07 20:12:31 +00:00
dyoung
48fa574a64
Move vlan(4) syntax from ifconfig.c into vlan.c.
2008-05-07 20:11:15 +00:00
dyoung
8bc06077c3
Move tunnel syntax into tunnel.c. Move net80211 'list' command
...
syntax into ieee80211.c.
2008-05-07 20:03:27 +00:00
dyoung
ad19851f11
Move net80211 and agr(4) syntax out of ifconfig.c and into ieee80211.c
...
and agr.c, respectively.
2008-05-07 19:55:24 +00:00
