c0f59fbbeb
AD1845 on my AlphaStation 255 doesn't match the AD1845 doc.
...
Try to detect AD1845 (unfortunately this is not always correct)
and work around the problems.
2001-11-04 08:08:25 +00:00
bd78bc67aa
Re-implement the mixer
...
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1 , #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 06:57:40 +00:00
ab43d67621
Introduce "flags 1", which causes left and right channels swapped.
2001-11-04 06:44:31 +00:00
a1264327ae
Sort alphabetically.
2001-11-03 22:39:25 +00:00
f56dfeb08b
add trm (MI)
2001-11-03 22:35:33 +00:00
d3701fc18a
Add a driver for the Tekram DC-395U/UW/F and DC-315/U SCSI host adapters,
...
which have the Tekram TRM-S1040 ASIC.
This driver is written by Rui-Xiang Guo <rxg@ms25.url.com.tw>,
and a number of cosmetic changes by me.
Tested on i386 by the author, and on macppc and sparc64 by me.
XXX On arc, kernel got panic in ltsleep() called from scsipi_execute_xs(),
XXX but I'm not sure what is wrong...
2001-11-03 17:01:16 +00:00
f82eb7bfa1
Replace a magic number with macro.
2001-11-03 15:52:03 +00:00
d1ff85c9aa
Improve debug messages a little.
2001-11-02 13:02:20 +00:00
9d7baa72da
recognize fxp on IBM thinkpad T23. from akimichi@wide.ad.jp
2001-11-02 03:40:47 +00:00
2c903bf2c0
Add PCI power management control. If the power state of a bridge is
...
not D0 at device attaching or resuming, set the bridge D0 mode.
2001-11-02 03:32:33 +00:00
6195437083
missing NBPFILTER > 0
2001-11-01 17:32:33 +00:00
41756e36f8
Regen.
2001-11-01 17:25:37 +00:00
16c1f136e5
Reorder two entries in numerical order.
2001-11-01 17:25:05 +00:00
492a03edae
Regen.
2001-11-01 11:06:45 +00:00
44345ed1ac
New device (from OpenBSD).
2001-11-01 11:06:18 +00:00
fdf7743003
Add Intel PRO WLAN 2011.
2001-11-01 03:00:51 +00:00
246b858752
Inject events in the right place in the buffer.
2001-10-29 01:02:11 +00:00
46679564db
Add a DIAGNOSTIC test.
2001-10-28 17:16:58 +00:00
3deca4b069
Use the usb callout macros.
2001-10-28 16:53:21 +00:00
87746219bd
Put in some tests to see if the input source is NULL before using it.
...
Suggested by Havard Eidnes <he@netbsd.org>.
2001-10-28 10:30:22 +00:00
546b6e4434
Cosmetics.
2001-10-27 13:52:57 +00:00
8f9f77356d
add entry ELSA XI-800 CF wavelan card
2001-10-27 08:16:17 +00:00
3fc98e32f6
regen
2001-10-27 08:15:22 +00:00
bfc10c9a50
add ELSA CF wavelan card
...
XI-800
2001-10-27 08:05:21 +00:00
14fc12f3b4
Cosmetics.
2001-10-27 00:39:29 +00:00
b609967aa7
Don't enable/disable kbds that belong to a display; they are always enabled.
2001-10-27 00:35:48 +00:00
48673c604a
Having a display does not preclude the mux from being open.
2001-10-27 00:34:57 +00:00
49c2ea7a87
Compare against coreect value to determine if we belong to a mux.
2001-10-26 20:48:47 +00:00
eadca0dfa3
Remove TODO list.
2001-10-26 20:45:05 +00:00
a5d3f7530d
Small rearrangement and more error checking.
2001-10-26 20:36:27 +00:00
6d55fe438e
Change a debug message.
2001-10-26 20:35:55 +00:00
17ba384efc
s/usbd_alloc_report_desc/usbd_read_report_desc/
2001-10-26 17:58:21 +00:00
dc901ef1f3
Compare pointer with NULL instead of using them as a condition.
2001-10-26 17:53:59 +00:00
53adfd4111
Add Via KT266 as an ATA100 controller.
2001-10-26 10:38:12 +00:00
a79508e9d8
Regen.
2001-10-26 03:47:47 +00:00
ff3d1952b4
Disambiguate Orbit symbols.
2001-10-26 03:47:31 +00:00
4f05bf08da
Regen.
2001-10-26 03:29:02 +00:00
0b572b9434
Add a different ID for the Kensington Orbit.
2001-10-26 03:28:03 +00:00
dddb1ab51d
Add some conditional compilation so we can have atapibus, but not scsibus.
2001-10-25 23:56:02 +00:00
e0ec4407e6
Better debug messages.
2001-10-25 22:43:24 +00:00
b495351fbf
Commit changes I posted to tech-kern on Oct 14, which makes the ethernet part
...
of my Xircom RealPort Ethernet 10/100 + Modem (REM56G) work.
The modem part is still not usable (this would need some PCMCIA magic that
I don't know how to do; see my message to tech-kern on Oct 07).
Change to pcmcia_cis.c from OpenBSD.
I checked that this doesn't break a 3com 3C562D (ethernet+modem) which I
also have.
2001-10-25 20:20:24 +00:00
59121d58f5
Change back to have a wseventvar in the softc for event sources. This
...
way the effect of FIOASYNC survives close()/open(). Later versions
of XFree86 relies on this bug/feature.
Also add some more debug stuff.
2001-10-25 14:46:41 +00:00
437bf56d24
Fix pasto. From Andreas Johansson <ajo@rockstorm.se>.
2001-10-25 13:45:16 +00:00
8076bdb790
Regen.
2001-10-25 13:43:56 +00:00
c6f7926716
Add Logitech Cordless Desktop Optical.
2001-10-25 13:43:30 +00:00
a9df6b6421
make this compile without WSDISPLAY_COMPAT_RAWKBD.
2001-10-25 13:19:41 +00:00
d148d21082
Regen.
2001-10-25 11:57:44 +00:00
bee35a9613
Add some VIA KT266 numbers.
2001-10-25 11:57:15 +00:00
12cafbf382
Regen.
2001-10-25 11:17:46 +00:00
78bed7c076
Remove Inc, Ltd, AB, Gmbh, etc. to be consistent (and save a few bytes).
2001-10-25 11:17:18 +00:00
bcab1556e8
Regen.
2001-10-25 11:04:36 +00:00
782a2cd1cc
Add Olympos C-700. (From FreeBSD)
2001-10-25 11:04:18 +00:00
3aee8d644f
Prevent hang-up when a CardBus card is removed during the card is working.
2001-10-25 10:02:12 +00:00
ea0061b951
Change reset sequence to get status change bits set right on startup.
2001-10-25 02:08:13 +00:00
61406d282b
Force BIOS out of the game by setting the LEGSUP register to its default
...
value.
2001-10-25 01:46:26 +00:00
8c7d06c6f9
Add commented out match level feature.
2001-10-24 22:31:04 +00:00
3c51e46294
Regen.
2001-10-24 21:49:07 +00:00
5bd2b33be2
Add a PS/2 adapter.
2001-10-24 21:48:38 +00:00
1f93717101
Some more paranoia tests when entering the interrupt routine.
2001-10-24 21:04:04 +00:00
80d988187f
If we are the console and we have DDB then events must not be delivered
...
from the interrupt routine since this will enter the USB interrupt
processing recursively during polling.
Now ukbd can be used as console keyboard for DDB!
2001-10-24 21:02:18 +00:00
adca9c589f
More debug.
2001-10-24 20:20:03 +00:00
9e06709975
Clear wskbd_console_device when console keyboard is detached.
2001-10-24 15:44:50 +00:00
5c2ee5ebed
Make sure interrupt pipe is closed when detaching console keyboard.
2001-10-24 15:31:06 +00:00
97d4315865
Better debug message.
2001-10-24 15:30:17 +00:00
2f1f0a1702
Major rototilling of the wsmux code. No user visible changes (except that
...
many bugs have been fixed).
Changes:
The wskbd, wsmouse, and wsmux are now "sub-classes" of wsevsrc, which is
a source of ws events. This make the structure of those drivers a little
more uniform.
Many bug fixes involving adding and removing devices from muxes.
When a kernel is configured without wsmux there will now be none (unlike
before where you got a console mux anyway).
The kernel now compiles with all combinations of ws devices present.
2001-10-24 14:07:31 +00:00
1c11481abf
More null pointer checks in dump routine.
2001-10-24 00:42:05 +00:00
9b17b651ee
Regen; Add product IDs for the Powerhouse Systems PowerPro and PowerTop
...
PowerPC system controllers.
2001-10-24 00:19:21 +00:00
7bbddedbbd
Add product IDs for the Powerhouse Systems PowerPro and PowerTop
...
PowerPC system controllers.
2001-10-24 00:18:49 +00:00
d9756b0f59
Regen; more Intel Gig-E fixup, and add Intel i82544 IDs.
2001-10-24 00:14:47 +00:00
1d548d2778
More Intel Gig-E ID fixups, and add Intel i82544 Gig-E IDs.
2001-10-24 00:13:41 +00:00
d0c3b71a47
tra-la, another QLogic f/w funny- this time with the 2300.
...
If we get a completion status of RQCS_QUEUE_FULL, it means
that the internal queues are full. Other QLogic boards set
the QFULL SCSI status. But *nooooooooooo*, not the 2300.
2001-10-23 23:21:00 +00:00
d9f173b146
Make it compile with debug on.
2001-10-23 17:58:15 +00:00
8dd789d511
Comment out some redundant initializations to zero.
2001-10-23 16:24:33 +00:00
361bb97359
Support panpot on OPL3. Now this device is a stereo instrument.
2001-10-23 13:09:43 +00:00
7a27cbb4a3
De-__P()ify. Suggested by Lennart Augustsson.
2001-10-22 20:31:26 +00:00
3059c66d8f
fix a typo in the previous
2001-10-22 16:47:43 +00:00
6721892796
Forgot to add __attribute__((__packed__)) to one hardware structure.
2001-10-22 16:45:28 +00:00
c4f3ffd5e7
increase the value of _HME_NDESC from 32 to 128. it reduces the noise the
...
driver makes due to various bad status conditions.
2001-10-22 16:45:20 +00:00
1578242c1a
use _KERNEL_OPT so this can be built as an LKM.
2001-10-22 16:43:55 +00:00
da77194a02
We can't have XS_CTL_DATA_OUT and XS_CTL_DATA_IN at the same time.
...
Pointed out by Bernd Ernesti.
2001-10-22 16:16:00 +00:00
2bc9b4e2be
Remove hack to skip OFW nodes which don't correspond to devices. These
...
are generally only at the toplevel of the OFW tree, and are best handled
by the code that configures the toplevel (which often needs special
handling anyway).
2001-10-22 14:36:55 +00:00
51a4b6098f
Add ST15150N to quirk table, as per PR/13817.
2001-10-21 23:25:04 +00:00
bea8701ec4
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:18:50 +00:00
bd2ba73f5b
Regen
2001-10-21 23:17:37 +00:00
cb19665fbc
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:16:48 +00:00
97deb18c10
Wrap ifdef's cleaner so wsmouse_[add|rem]_mux only get pulled in if NWSMUX > 0.
2001-10-21 23:04:57 +00:00
d1e191d848
Reserve one descriptor at the end of the ring as a termination point,
...
to prevent the producer index from getting confused.
2001-10-21 20:45:15 +00:00
5f6fd54ec7
Add a config flag (0x02) that can force DMA to be *disabled* on
...
chipsets for which it would otherwise be enabled by default.
2001-10-21 18:55:14 +00:00
132fdb30e6
Make the various timing, etc. tables const, and add the __unused__
...
attribute to them, just in case something other than the pciide driver
proper needs to pull in the header.
2001-10-21 18:49:19 +00:00
033f1aaf8d
Update to latest 12160 initiator firmware.
2001-10-20 21:52:24 +00:00
5522109c39
Protect against deranged fabric nameservers that spit out 10000 identical
...
port numbers.
2001-10-20 18:37:54 +00:00
8f0b837cd4
gem_init(): Don't call gem_mii_statchg() directly. Instead, call
...
gem_mediachange(). This will cause gem_mii_statchg() to be called
by the MII layer with the correct MII media state, so that speed
duplex parameters will be set properly.
2001-10-20 18:25:52 +00:00
a9ec452d57
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:31:25 +00:00
8e7e3408b5
Regen.
2001-10-20 15:29:04 +00:00
259caf9257
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:28:45 +00:00
0b357f290a
FCS check and padding for minimum size Ethernet packet
2001-10-20 08:19:47 +00:00
48bdb0d067
Match printers that report their interface as IEEE 1284 in addition to
...
bidirectional.
2001-10-19 15:30:25 +00:00
d9e921bd84
Fix obviously wrong printf() format in pci_intr_establish() failure case.
...
Pointed out by Chuck Silvers.
XXX This has compiled without a warning for me - what's up?
Add sc->sc_dev.dv_xname in another failure printf()
2001-10-18 19:15:38 +00:00
d520fe96ee
add emuxki
2001-10-18 17:45:15 +00:00
a6952fe242
add device name used by playstation2 (gsfb, sbus, smap, spd)
2001-10-18 16:18:45 +00:00
7c90b959da
Fix check in device open.
...
Patch by KUROSAWA Takahiro in kern/14289.
2001-10-18 16:08:05 +00:00
5d51f988c6
Yet more cruft removal.
2001-10-18 15:19:21 +00:00
62577b1c53
Remove more cruft left over from copying bits of other drivers.
2001-10-18 15:09:15 +00:00
dcd30fd216
Add a missing return statement in an error case, and g/c some
...
cruft that's not relevant in the PCI world.
2001-10-18 06:29:55 +00:00
c616253896
Remove some more stuff left over from copying bits of the HME driver.
2001-10-18 06:28:17 +00:00
d44a5ae87c
Remove some unneeded stuff from the gem_pci_softc.
2001-10-18 06:14:33 +00:00
c559c94a45
Add goo to fetch the MAC address from OpenFirmware on the macppc
...
port. Copied from the macppc "gmac" driver, but otherwise untested.
2001-10-18 03:55:07 +00:00
285d37822b
- The GEM registers are always memory type registers. Don't use a
...
broken hueristic to determine memory vs. i/o (one should never make
an assumption that the bus_space_tag_t is a pointer, as this code
did).
- Fix the "can't map registers" error message.
- Garbage-collect some code that is not relevant to the GEM (which
was already #if 0'd out).
- Cluster all the SPARC-specific code into one place (will be
replaced with Properties once that is fleshed out).
2001-10-18 03:48:48 +00:00
bfda843574
Manipulate the Tx desc pointer as 2 32-bit values, just as
...
we do with the Rx desc pointer, both for consistency, and
for platforms which don't have bus_space_*_8().
2001-10-18 03:33:33 +00:00
397a84f51a
Fix the semantics of __PCI_DEV_FUNCORDER so that they're actually useful:
...
If __PCI_DEV_FUNCORDER is defined, don't do the song-and-dance to check if
a device is multi-function; machdep code is going to tell us exactly which
functions to probe.
Note this required changing how pci_func_devorder() works in the
sparc64 PCI machdep code; now the "curnode" is assumed to point
to the bus, rather than some function (typically 0) on the device,
just as pci_bus_devorder() makes that assumption.
All this should allow the PCI code to actually locate the second
HME device on a Sun Netra t1, which is at 3,1 -- previously, the
PCI code would have missed it because there is no device at 3,0.
(Sun deserves a brick to the head for this one -- this seems clearly
out of line with the PCI spec.)
2001-10-17 22:16:41 +00:00
d4df209cbd
Add driver for Creative Labs SBLive! EMU10000, possibly also PCI512.
...
Written by Yannick Montulet (thanks!), with only couple minor touches by me.
2001-10-17 18:39:41 +00:00
190ebf4d1f
regen
2001-10-17 15:44:50 +00:00
b45d3009cf
add Dallas Semiconductor product
...
USB-FOB/iBUTTON
2001-10-17 15:44:22 +00:00
5f75bfa4ba
Move some chip initialise code into pccbb_chipinit() function.
2001-10-17 10:25:51 +00:00
070d583bb3
PR/14256: Kevin P. Neal: Add quirk for micropolis drive.
2001-10-16 13:33:02 +00:00
b7ca23147b
Add UDMA/100 support for SiS chipsets 645, 650 and 730.
2001-10-16 08:22:50 +00:00
5858458732
Regen.
2001-10-16 08:15:01 +00:00
7c4f946401
Add host bridges of SiS 645, 650 and 730 chipsets.
2001-10-16 08:14:15 +00:00
40dc031852
Add missing timings for Ultra DMA modes 3 to 5 on SiS hostadapters.
...
Problem pointed out by IWAMOTO Toshihiro on "tech-kern@netbsd.org".
2001-10-16 08:10:24 +00:00
1f7386b8aa
#include mulaw.h for converter functions prototypes.
2001-10-16 04:36:56 +00:00
3527006336
Don't use wsmux_getmux() if we NWSMUX == 0. Fixes PR kern/14252.
...
This is only a stop gap measure until the real wsmux changed get in.
2001-10-15 21:51:33 +00:00
8d71019a14
Fix a pasto in the last revision.
2001-10-14 21:49:00 +00:00
69fff4726e
Refuse to register a callback if the completion thread isn't started yet.
2001-10-14 21:17:41 +00:00
ea29ee7d56
Call siop_morecbd() only when scsipi ask us ADAPTER_REQ_GROW_RESOURCES.
...
This prevent using bus_dmamem_map() from interrupt context.
Should fix kern/13827.
2001-10-14 20:37:28 +00:00
a84535fd3e
Call ADAPTER_REQ_GROW_RESOURCES from the completion thread, if possible.
...
This allows HBA drivers to call bus_dmamem_map() safely.
2001-10-14 20:31:24 +00:00
d9b3639de6
quirk for panasonic adapter.
2001-10-14 19:21:45 +00:00
ce6aaa187a
Split channel flags in chan_flags used for communications between
...
scsipi and HBA, and chan_tflags used for communications between scsipi
and its kernel thread. No functionnal change.
2001-10-14 19:03:43 +00:00
bc0ae7328a
Regen.
2001-10-14 18:09:42 +00:00
19c27f0e0d
add another cdrom. The box says fujitsu, but the guts seem to be panasonic.
...
Mmm, inbreeding.
2001-10-14 18:09:22 +00:00
9ad1f29f64
The description about soft-reset of WI_PCI_COR was added
...
and WI_PCI_SOFT_RESET was used.
Cosmetic change.
2001-10-14 12:33:18 +00:00
1e022c27b4
Use UDMA/100 on SiS 735 chipset.
2001-10-14 11:21:10 +00:00
5a41496a04
avoid overflow in timeout calculations.
2001-10-14 00:32:33 +00:00
5da06efad4
Allow for control devices (minor+128) to make it possible to manipulate
...
muxes that are in use.
Create muxes on demand.
2001-10-13 20:03:38 +00:00
ad74203973
Fix a pasto.
2001-10-13 19:58:35 +00:00
2efffa7ad7
Fix a (very old) pasto.
2001-10-13 19:56:09 +00:00
b079ab789b
ANSIfy.
2001-10-13 16:05:42 +00:00
04b1440239
Use memset(), not bzero().
2001-10-13 15:59:01 +00:00
82e5e6ab85
ANSIfy.
2001-10-13 15:56:15 +00:00
cbcfff63ec
Add Intersil Prism2.5 Mini-PCI wavelan.
2001-10-13 15:00:23 +00:00
d701e45c14
Two changes to the wsmux code:
...
* Allow the wsmux used by wsdisplay for the keyboard(s) to be explicitely
specified with the kbdmux locator.
* Allow keyboards and mice that have a mux to be opened in the regular way.
These changes should be totally backwards compatible.
2001-10-13 13:35:59 +00:00
c0e7956031
regen.
2001-10-13 07:44:21 +00:00
8afd8ee7a9
add vendor & product ID
...
Intersil PRISM2.5 Mini-PCI WLAN
2001-10-13 07:43:42 +00:00
727e8d4a04
Bugfix: re-order double buffer only when second buffer exists.
2001-10-12 09:27:23 +00:00
de085459c1
Fix printf format.
2001-10-12 07:30:23 +00:00
eea6d83f4b
Regen.
2001-10-11 14:31:58 +00:00
fa5ea802e9
Add host bridge of the SiS 735 chipset.
2001-10-11 14:30:21 +00:00
9ba9477c1a
Regen.
2001-10-11 12:05:39 +00:00
9ec0bc09c1
Add Epson 1650.
2001-10-11 12:05:10 +00:00
08632b145a
Back out previous - it causes panics.
2001-10-10 09:33:36 +00:00
c0018ebdfe
The flow control registers are 16 bits wide, not 32.
2001-10-10 03:41:24 +00:00
a969ff5460
Add a reference counter to avoid blowing away the softc while frobbing
...
the MII registers.
2001-10-10 02:14:16 +00:00
407046e784
Resync after the sort
2001-10-09 03:18:37 +00:00
e23b40707e
Sort in a sane way. This file had become somewhat disordered over
...
time. Vendors are sorted by number. Vendors are grouped
alphabetically, with entries within a vendor's group arranged
numerically. CIS entries sorted alphabetically by identifier.
2001-10-09 03:17:22 +00:00
db344ecd7b
fix PERSONA keymap. patch by KIYOHARA Takashi
2001-10-08 15:35:06 +00:00
adfbf61e48
Regen.
2001-10-08 03:38:24 +00:00
3d25ac0f24
Add some more Ethernet adapters (info gleaned from Linux).
2001-10-08 03:37:53 +00:00
4e23e486b8
Regen.
2001-10-07 22:31:02 +00:00
cafdfc900c
Add Epson 640U. From Chris Baird <cjb@brushtail.apana.org.au>
2001-10-07 22:30:33 +00:00
7903b5cda4
fix typo (two -> to)
2001-10-07 10:14:42 +00:00
6349e2e63a
Fix various 2300 GB issues related to chip errata and documentation
...
misunderstandings. We also now can report our connection rate.
2001-10-06 20:34:49 +00:00
daf0329c3c
Respect QLogic's errata- read BIU_ISR even on the 2300
...
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
accessing them).
2001-10-06 20:33:24 +00:00
ac8c8ee3fd
regen; iPAQ
2001-10-06 15:03:34 +00:00
c70a35c897
iPAQ PocketPC
2001-10-06 15:02:22 +00:00
01b2f9b5c4
Remove and unnecessary cast, and avoid a memory leak in the event
...
allocation of the GATT fails.
2001-10-06 02:48:50 +00:00
525f4a9bed
Backout a line that accidentally got included when the .h reorg went in.
2001-10-06 00:47:46 +00:00
c2a1bef2f3
Create the Tx DMA maps with a size large enough for a jumbo Ethernet
...
frame.
2001-10-06 00:14:59 +00:00
7fbd726cc8
Stop wscons from conflicting with rcons.
2001-10-05 22:08:28 +00:00
0d4d2293bb
Minor tidying up of the HME driver attach:
...
- Print nicer-looking message.
- Use bus_space_subregion() when appropriate, rather than arithmetic
on a bus_space_handle_t.
2001-10-05 17:49:43 +00:00
035a63f6d3
More #if 0's bite the dust.
2001-10-05 15:41:23 +00:00
9d1d665dac
Nuke some #if 0 stuff.
2001-10-05 15:33:12 +00:00
8d2fa0f7b6
add cast to u_long before cast to caddr_t make these compile on sparc64
2001-10-05 14:25:15 +00:00
a5aff000fc
Match the UMAX Astra 3400.
2001-10-05 00:31:06 +00:00
7853ec7367
Regen; add UMAX Astra 3400 scanner.
2001-10-05 00:24:52 +00:00
919f3bb120
Add UMAX Astra 3400 scanner.
2001-10-05 00:24:25 +00:00
c072a38d4c
Add missing comma
2001-10-04 23:36:10 +00:00
d00ed4116f
Tidy up the #includes a bit. (coulda/shoulda done that with last commit.)
2001-10-04 17:42:29 +00:00
2621bd1124
rf_options.h isn't needed here.
2001-10-04 17:41:17 +00:00
aa7a54f593
If rf_options.h needs to be include it, then include it. Don't rely on
...
another .h file to pull it in.
2001-10-04 17:39:18 +00:00
dad0d4578c
Nuke a couple of unused extern variable declarations.
2001-10-04 17:31:01 +00:00
32c731329a
These have been completely replaced by raidframevar.h and raidframeio.h.
2001-10-04 16:08:51 +00:00
e4e898c2e0
Need to recurse into the raidframe subdir too.
2001-10-04 16:04:53 +00:00
fe686dfde7
Setup installation mechanism for <dev/raidframe/raidframevar.h> and
...
<dev/raidframe/raidframeio.h>
2001-10-04 16:04:16 +00:00
765e00d3de
Step 2 of the disentanglement. We now look to <dev/raidframe/*> for
...
the stuff that used to live in rf_types.h, rf_raidframe.h, rf_layout.h,
rf_netbsd.h, rf_raid.h, rf_decluster,h, and a few other places.
Believe it or not, when this is all done, things will be cleaner.
No functional changes to RAIDframe.
2001-10-04 15:58:51 +00:00
c68c2f3692
add new cd18xx, sio16, remove simba for sparc64
2001-10-04 15:56:35 +00:00
46a6eb1477
Step 1 of the disentangling of RAIDframe's .h files:
...
raidframevar.h - contains bits of rf_types.h, rf_layout.h,
rf_netbsd.h, rf_raid.h, and rf_decluster.h.
raidframeio.h - contains the bits needed for doing IOCTL's w/
RAIDframe.
These bits will be visible to userland.
2001-10-04 15:43:57 +00:00
96528f60d6
Add esl.
2001-10-04 10:43:10 +00:00
192ef03e2e
Add repulse.
2001-10-04 10:24:59 +00:00
3d2be4cf9b
Fix pasto in type of dev_ioctl method.
2001-10-03 20:48:41 +00:00
f13f663c13
Regen: Minor correction to the name of the 405GP PCI bridge.
2001-10-03 12:07:08 +00:00
f3706d5650
Minor correction to the name of the 405GP PCI bridge.
2001-10-03 12:05:49 +00:00
9946aef1da
ack intr only when intr is for us.
2001-10-03 06:58:47 +00:00
0cfedcb2eb
frontend driver for the 16 port serial card by aurora technologies. this
...
doesn't quite work yet -- interrupt acknowledgement is hosed (and thus the
device keeps interrupting). uses the newly commited cd18xx backend.
2001-10-03 04:28:41 +00:00
5d4f3fa900
add a backend serial driver for the cirrus logic CL-CD180/1864/1865
...
8 port chip. this is used in several sbus (sparc) serial boards, as
well as an 8 port isa card from riscom. sio16 (sbus) frontend coming
shortly.
this is heavily based on the com and zs drivers.
2001-10-03 04:25:29 +00:00
1339e88a86
Add a new optional method, dev_ioctl, to the audio hardware driver interface.
...
It is called when an unrecognized ioctl() is performed on a device,
thus allowing ioctl()s that frob the hardware driver (like loading
microcode).
2001-10-03 00:04:47 +00:00
9cf205c410
ANSIfy.
2001-10-02 23:31:54 +00:00
f51c550f74
ANSIfy.
2001-10-02 22:41:22 +00:00
5f1dd50365
Add a WSKBD_TYPE_ADB for Macs.
2001-10-02 21:03:05 +00:00
787bb8ce97
fix system freeze in situation where you pop a pcmcia card out of the
...
slot while it is in operation
ok'd by thorpej
2001-10-02 19:17:07 +00:00
1e72a22c49
move DIAGNOSTIC-printf up one block to make it reachable
...
noted by Christophe Kalt in private email
2001-10-02 17:59:38 +00:00
a0265b2599
Remove some debug messages.
2001-10-01 23:55:00 +00:00
ef420318e0
Increase receive ring to 128 entries and handle both endian devices.
2001-10-01 23:39:57 +00:00
9706e581b2
Don't map the aperture into KVA, it isn't needed.
2001-10-01 21:54:48 +00:00
408e1d1b10
Fix bogus vdir offset calculation.
2001-10-01 14:41:09 +00:00
30d7e93296
Move pmax-only if_le_ibus.c from dev/tc to arch/pmax/ibus.
2001-10-01 11:42:17 +00:00
342856c15c
Move asc_tc and asc_tcds config info to dev/tc/files.tc now that pmax
...
uses MI SCSI.
2001-10-01 10:22:42 +00:00
240c203d16
s/asc_pmaz/asc_tc/g
2001-10-01 10:19:09 +00:00
f976a7141c
Move MI PMAZ-A SCSI attachment to sys/dev/tc.
2001-10-01 10:17:25 +00:00
0e8ee83d8f
avoid losing a desc on error.
2001-10-01 09:26:29 +00:00
4e77e1ee5f
Regen; added product ID for RealTek 8139[BC].
2001-10-01 00:28:02 +00:00
2b02410c00
Add product ID for the RealTek 8139[BC].
2001-10-01 00:27:33 +00:00
30e122c6f1
in vndstrategy(), handle the underlying file being force-unmounted.
2001-09-30 12:32:09 +00:00
2c433e9757
Fix a very stupid pasto - the card has two B channels, so better not
...
query the HSCX chip version of the third one.
2001-09-30 11:50:05 +00:00
cf2debbc86
force 0x1000 align for memory base before
...
calling rbus_space_alloc().
resource management may be inconsistent without it.
2001-09-30 06:32:02 +00:00
d645f8862c
fix for Roland/EDIROL UM-880.
...
- add NULL check to UMQ_ISTYPE; sc_quirk is NULL for genuine umidi, but
forgotten to check. Thus, kernel will panic after connect the device.
- fix how to count the number of endpoints in alloc_all_endpoints_genuine().
- add a quirk for the native mode of UM-880.
2001-09-29 22:00:47 +00:00
d535feb911
Get rid of eslreh.h and use ../isa/essreg.h.
...
Minor whitespace fixes.
2001-09-29 19:30:29 +00:00
d09eea2ace
Add a missing command.
2001-09-29 19:08:49 +00:00
b1d96a9b44
ANSIfy.
2001-09-29 19:06:32 +00:00
f75a223c4e
Add the esl driver.
2001-09-29 18:46:16 +00:00
fa591d48c0
- Add an acpi_evaluate_string() to evaluate string objects.
...
- In acpi_print(), try to evaluate the _STR object, and print
it if the device is not configured.
- Make this compile without ACPI_DEBUG, from Masanori Kanaoka.
2001-09-29 18:13:48 +00:00
9cb10f82f8
Calculate offsets of sglist dinamically rather than use an static array
...
because PAGE_SIZE is not constant on some ports.
2001-09-29 14:23:37 +00:00
c018750423
Add esl driver for Eiger Labs sound card. From Jared D. McNeill
...
<jmcneill@invisible.yi.org>.
2001-09-29 14:00:57 +00:00
58a0f075d2
Regen.
2001-09-29 13:59:37 +00:00
da8947c921
Add Eiger Labs sound card.
2001-09-29 13:59:16 +00:00
797a70e551
Add a detach function (from Jared D. McNeill).
2001-09-29 13:56:04 +00:00
84b2da1b5c
Don't install a single system notify handler.
2001-09-29 05:39:14 +00:00
4ce1f116cf
Don't be DEBUG by default, but still be noisy about lid status
...
changes until such time as we actually do something with them.
2001-09-29 05:36:49 +00:00
533c169276
Build acpi_resource.c, add "acpiec" and "acpiacad".
2001-09-29 05:36:03 +00:00
2945805ff3
Skeleton ACPI AC Adapter driver.
2001-09-29 05:35:06 +00:00
b41a7fd4de
ACPI Embedded Controller driver.
2001-09-29 05:34:23 +00:00
6179b9baef
Add code to parse ACPI bus resources.
2001-09-29 05:34:00 +00:00
391ff9e86d
Flesh out w/ some comments from the spec, and add some _ADR decoding
...
macros.
2001-09-29 05:33:00 +00:00
274a22b8c0
remove a debug printf committed mistakenly.
2001-09-29 02:16:21 +00:00
da8b08386f
- fix wrong ca_devsize.
...
- change #if 0 to meaningful name.
- enable memio.
2001-09-29 01:53:23 +00:00
4210698cd5
fix wrong ca_devsize.
2001-09-29 01:52:23 +00:00
37583aadfc
Reenable RHSC interrupt after one second so hot plugging works.
...
(From OpenBSD.)
2001-09-28 23:57:21 +00:00
c5a4cc1291
Only clear the endpoint on stall (from FreeBSD).
2001-09-28 23:42:16 +00:00
901a3da087
Regen.
2001-09-28 23:41:33 +00:00
ef7e225e59
Rename Accton adapter (from FreeBSD).
2001-09-28 23:41:09 +00:00
5c2e2edf22
Regen; more corrections to Intel Gig-e product IDs.
2001-09-28 22:06:25 +00:00
435e4031ad
More corrections to Intel Gig-e product IDs.
2001-09-28 22:06:04 +00:00
f32aef24fd
Roland UM-880 has two modes each assigned product IDs.
...
UM880N (0x0014) : Native mode.
UM880G (0x0015) : Generic USB MIDI mode.
2001-09-28 20:36:46 +00:00
114e12bdf1
add a new device; ROLAND/EDIROL UM-880 MIDI I/F with patcher.
2001-09-28 19:10:59 +00:00
01e394b10d
Now that we have a fixed thaw thingie- we can turn back on sleeping
...
on mailbox commands.
2001-09-28 16:23:19 +00:00
fd12ba4f30
Don't force a fixed baud rate if the parent zs driver has already determined
...
the baud rate set by the PROM.
2001-09-28 14:34:49 +00:00
984d30ac45
don't depend on other headers to include sys/proc.h for us.
2001-09-28 12:36:48 +00:00
80373b7e54
don't depend on other headers to include sys/proc.h for us.
2001-09-28 11:59:51 +00:00
1a9d24bce1
Add stub drivers for ACPI buttons and lid switches. These don't
...
really do anything yet.
2001-09-28 02:30:13 +00:00
69f30a1104
Add some basic ACPI probing framework. This is far from complete,
...
it is merely a work in progress.
2001-09-28 02:09:22 +00:00
bad233b1df
config(8) files declaration for ACPICA.
2001-09-28 02:05:47 +00:00
7fb46a1597
Minor changes to get ACPICA to compile with our kernel warning levels.
2001-09-28 01:59:43 +00:00
itohy