997074f17c
Add a missing 'return' in an error path; noticed by Matthias Drochner.
1998-12-08 13:29:31 +00:00
54a0e65b02
initialized unused dma registers to 0xdeadbeef instead of 0 to aid debugging.
1998-12-08 09:35:07 +00:00
10d50739c7
Actually, restructure scsipi_wait_drain() slightly.
1998-12-08 00:26:22 +00:00
8ebf1e8824
Remove xs_free_list; it no longer exists.
1998-12-08 00:20:16 +00:00
624619a881
When closing, wait for pending xfers to drain before deleting the reference
...
to the adapter.
1998-12-08 00:19:27 +00:00
dcc5f32c2b
When closing, wait for pending xfers to drain before unlocking the door,
...
and wait again before deleting the reference to the adapter.
1998-12-08 00:18:46 +00:00
1ddd2ffec0
- When allocating a scsipi_xfer, add it to the specified device's
...
pending_xfers queue.
- When freeing a scsipi_xfer, remove it from the device's pending_xfers
queue. If the queue is empty, and SDEV_WAITDRAIN is set, wakeup
those waiting for the queue to drain.
- Implement scsipi_wait_drain(), which waits for a device's pending_xfers
queue to drain.
1998-12-08 00:17:21 +00:00
98194169ea
When allocating a device's scsipi_link, initialize the pending_xfers
...
queue.
1998-12-08 00:14:41 +00:00
126dc6bfcc
- Remove the "free_list" member from scsipi_xfer. Add "adapter_q" and
...
"device_q" TAILQ entries. The former is for use by the adapter driver,
as it sees fit. The latter is for the scsipi middle layer to track
pending xfers per device.
- Add a pending_xfers queue to scsipi_link, to track pending xfers per
device.
- Grow scsipi_link's flags to int, and add SDEV_WAITDRAIN, to indicate that
we're waiting for the pending_xfers queue to empty.
1998-12-08 00:13:58 +00:00
ea6bba6b90
Fix a typo.
1998-12-07 17:17:14 +00:00
14b18ffcb5
- Remove improper casts mistakenly creeped in the last commit.
1998-12-07 04:21:57 +00:00
fbeabd992c
Implement sparse bus space support.
1998-12-06 15:39:12 +00:00
5ff97947fe
Search for NCR controllers, but not on VS4000/60.
1998-12-06 14:33:54 +00:00
fec054bd9a
Simple hack to get at least PIO functionality out of the VS2000/3100 ncr5380.
...
Fixed by Jens Arvid Nilsson.
1998-12-06 13:55:09 +00:00
c2e84d0cde
What was missing here is the mapping between our booting SCSI bus number
...
and the parent (hba) path from which we booted from. As a temp fix,
we'll only go with the first match to set altbootdev- not additional matches.
The problem was further exacerbated by the fact that cnpoll doesn't seem
to work on serial consoles.
1998-12-05 21:05:44 +00:00
337eb43541
NOMODESENSE for all Seagate ST19171- not just FC
1998-12-05 20:52:47 +00:00
d610e1ad3f
Update BA for new max_lun parameter for SCSIbusses. Clearify maximum luns
...
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
1998-12-05 19:48:23 +00:00
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
4b8245a959
Add a max_lun property to match with the max_target property. Shorten
...
max_target to int16.
1998-12-05 19:41:31 +00:00
33fde1ad76
Eliminate the moreluns entry as it makes no sense for fat SCSI busses (e.g,
...
FC loops). Change the semantics of scsi_probedev so that it returns 1 if
you should continue probing at this target, else 0 for not.
Replace the blanket use of '7' with the use of the new sc_maxlun property
that is now gathered from HBAs. Allocate scsipi_link arrays based upon this.
Fix a really nasty and silly bug that has been there for a while where the
number of first level scsipi_link structures was one less than it needed
to be.
1998-12-05 19:39:23 +00:00
3f225e009d
Add Sigma Designs REALmagic Hollywood Plus MPEG-2 decoder
1998-12-05 19:02:14 +00:00
8f7f8d557d
made prototype for debug function wss_dump_regs match its definition.
1998-12-05 10:49:24 +00:00
340efce0ea
Track PV_REFERENCED bit as for PV_MODIFIED, to make mdsetimage work correctly.
...
Compatiblity with Mach VM: clear pmap-private bits in pmap_remove() if !UVM.
1998-12-05 09:13:09 +00:00
aecf708ee3
Clean up kernel PTE allocation. Allocate space for maxproc kernel stacks.
...
Bump UVM swap-map to avoid panics on large swap machines.
1998-12-05 07:50:12 +00:00
ea1aa3511c
#ifdef _KERNEL around cpu_exec_ecoff_setregs() prototype.
1998-12-05 07:26:11 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
3a08ae9402
always use unsigned numbers for screen positions (for sanity - the libkern
...
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
1998-12-04 20:48:04 +00:00
7fa243e59e
Pass the symbol table size, like a.out.
1998-12-04 20:22:36 +00:00
2d7f8f3343
Support both a.out and Elf32 symbols in DDB.
1998-12-04 20:19:22 +00:00
c89493522f
- Make the ddb_init() interface consistent for a.out and ELF.
...
- Allow DDB to run-time switch for a.out or ELF symbol table support.
1998-12-04 20:18:05 +00:00
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
c10f6edafc
AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner.
1998-12-04 11:17:54 +00:00
433c02431e
Init the decriptors at boot time rather than at interface attach time.
...
Now that we have pcmcia hot-plug, it's not the same. Fixes kern/3189.
1998-12-04 11:04:37 +00:00
cdbe530495
No need to #include malloc.h here.
1998-12-04 11:02:30 +00:00
3efc699962
Sanity check a few values in the superblock, to avoid mallocing huge
...
memory area if we try to mount a corrupted filesystem. Fixes kern/3933.
1998-12-04 11:00:40 +00:00
75ff38a27d
- Fix an error in primary cache line size detection logic; when IC and/or DC
...
bit is 1, then line size is 32. Otherwise, 16.
1998-12-04 10:32:08 +00:00
9f33638436
- Fix and improve confusing indentations inside trap().
...
- Don't make a reference of curproc when it has NULL value. It causes
double fault upon a fatal panic ocation.
- Macro FETCH_INSTRUCTION() took a value of address 0.
-
1998-12-04 04:35:44 +00:00
0bba7a7eca
Not used.
1998-12-04 00:17:49 +00:00
1673c21984
Enable `device_register()' for the sparc.
1998-12-03 23:50:11 +00:00
5d9f86821c
Add a device_register() function to determine the boot device.
...
Use it in addition to the old method for a while, so we can take note
of any glitches easilier.
1998-12-03 23:49:58 +00:00
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
a68f1ef94c
Handle the case where the device does not support GET_PEPORT better.
1998-12-03 20:43:19 +00:00
bedb40a78c
Use umodem as the modem driver stub.
1998-12-03 19:58:09 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
1b04131eff
Try a bit harder to detect the physical failure of a component, and to
...
mark that component as dead. Physical failures are handled much better now.
1998-12-03 15:14:40 +00:00
3f3d8e85e6
If a configuration fails due to a non-existant spare, remember to release
...
any previously allocated components before bailing. Credit to Manuel Bouyer
for noticing this.
1998-12-03 15:06:25 +00:00
679de7e878
Fix (potential) referencing of null pointer in (verbose) debugging mode.
1998-12-03 14:58:24 +00:00
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
619952b3ee
Not used.
1998-12-03 11:05:18 +00:00
3c6a704193
- Use explicite structure member reference with 'struct frame' to alter
...
register values of exception frame pointed with p->p_md.md_regs.
- Local auto variable 'cpustate' in cpu_coredump() was never used correctly.
1998-12-03 06:28:45 +00:00
64ba00be2c
Change r_type bit field size 5 to 6 and reduce unused bit(2 to 1).
...
Suggested by Mirian Crzig Lennox.
1998-12-03 05:15:06 +00:00
33038ca087
Tweak this so it will build and run on ILP32 hosts, anyway, 0x...LL constants
...
are blessed by the C9X draft.
1998-12-03 04:16:18 +00:00
2228eaca8a
Add configuration and interface locators.
1998-12-02 22:57:08 +00:00
cf75925c7f
Even shorter printfs at attach.
1998-12-02 22:54:52 +00:00
4b4afb8252
Regen.
1998-12-02 22:51:50 +00:00
7270b91afe
Shorten some vendor names.
1998-12-02 22:49:51 +00:00
e424a174ba
Add stub for a modem driver.
1998-12-02 22:47:19 +00:00
da572a137f
Argh, fix the ANSI CPP version of the a.out WARN_REFERENCES().
1998-12-02 21:16:46 +00:00
d90b3d3438
Add dump_kmemstats(), callable from DDB to show kmem statistics. From
...
Chuck Silvers via Chuck Cranor.
1998-12-02 20:35:28 +00:00
fd3af06364
Avoid wrapping lines in attach printfs.
1998-12-02 17:20:20 +00:00
7d417ca964
Handle compound devices in usbd_get_report_descriptor().
1998-12-02 17:17:40 +00:00
c4dc0e3950
Regen.
1998-12-02 17:14:53 +00:00
65145fce2c
Fix typo.
1998-12-02 17:11:51 +00:00
41095ae62a
Add some new devices.
1998-12-02 17:02:59 +00:00
1d5d5ab40a
In struct wdc_xfer, change 'channel' to a pointer to a channel_softc, to avoid
...
a double-pointer dereference at run-time. Suggested by Matthias Drochner.
1998-12-02 15:53:34 +00:00
4cb00b9fe2
Adapt to gcc change (calling sequence).
1998-12-02 14:23:03 +00:00
ab57245c0f
Document the use of flags to set/disable PIO/DMA/UDMA modes.
1998-12-02 10:54:26 +00:00
45675ab14b
- change drive_flags from u_int8_t to u_int16_t
...
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
4787b2ea75
- intentation
...
- sync LK_* flags with ffs/ufs
1998-12-02 10:44:52 +00:00
c2912048fc
Cosmectic change in a panic(), so that the panic string printed by savecore
...
has more meaning.
1998-12-02 10:41:01 +00:00
a5d7ea15aa
Regen.
1998-12-02 09:43:15 +00:00
8692433023
add the compat id for the aha-1542cp
1998-12-02 09:42:57 +00:00
a6f7e0c05a
Implement WARN_REFERENCES().
1998-12-02 00:58:42 +00:00
57ba10cfab
Change ofisa attachment comparable to change drochner made to isa
...
attachment. Works at least well enough to allow kernel to build &
boot on diskless shark with wdc controller in it.
1998-12-02 00:18:41 +00:00
cbc0f73bee
Update device special file modification times if NODEVMTIME isn't set.
1998-12-01 23:18:48 +00:00
b519a199d6
Pass MNT_NODEVMTIME flag to lower VFS layer.
1998-12-01 23:17:25 +00:00
9462b1dde5
Add new MNT_NODEVMTIME mount flag.
1998-12-01 23:16:23 +00:00
7cce2beefa
Fix the __abs_copy() macro (wrong parameters to __abs_opname).
1998-12-01 15:32:28 +00:00
70249fa2f2
Make this compile again... ('maximum entropy').
1998-12-01 15:30:01 +00:00
bef8c343db
In ext2fs_sync(), don't flush the vnode if vput() returned an error. Fixes
...
PR kern/6495.
1998-12-01 14:37:44 +00:00
75ed099b01
struct ataparam has endian dependence, so add big-endian case.
1998-12-01 13:06:37 +00:00
1e7ec4d50e
Use _C_LABEL() to generate C labels in assembly code, don't prepend an
...
underscore (_) directly. (XXX Except in a few places, where traditional
CPP's macro evaluation semantics break things, so we test for __ELF__
directly in those places).
1998-12-01 04:30:59 +00:00
6e9aa26bb0
Fix disk size identifier bug.
1998-11-30 22:27:32 +00:00
14dc6ddfe6
Fix PR6473: allow sends to tun* devices using bpf.
1998-11-30 21:43:11 +00:00
8ae89c20dc
Do untimeout() for the timeouts we set up.
...
(How can this ever have worked?)
1998-11-30 21:39:20 +00:00
c969d96715
Change the type of sys_errlist from const char *const [] to const char *const *
...
and rename it to __sys_errlist14. This will prevent the size of the exported
symbol from changing when more errors are added to the list.
1998-11-30 20:37:52 +00:00
aeec8f4cb2
regen
1998-11-30 19:47:53 +00:00
cef29c6e94
Per PR/6172 (Johnny Lam, lamj@stat.cmu.edu), fix pcidevs identification
...
of CL-PD6729. See <http://www.cirrus.com/products/overviews/pd6729.html >.
1998-11-30 19:47:16 +00:00
02e50c5ac1
Clarify some signed/unsigned confusion with resource limit setting.
...
Still don't understand you some old binaries try to use 5 for vmem
instead of 6.
1998-11-30 15:46:33 +00:00
7c72f9361b
Change comment about isa_intr_establish() as discussed on tech-kern.
1998-11-30 12:57:10 +00:00
adbfb3777a
Update previous: we don't have the required information all the time.
1998-11-30 07:54:29 +00:00
bouyer