df70e460db
Make vendor names more consistent.
1999-09-15 13:57:09 +00:00
adc55421b4
Regen.
1999-09-15 12:31:28 +00:00
f14a3915b3
Add a number of devices and rename a few. From a Linux web site.
1999-09-15 12:30:59 +00:00
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
5486205b69
Regen.
1999-09-14 22:06:44 +00:00
ed9b74f17a
Sort out some confusion about which vendor is really Belkin.
1999-09-14 22:06:21 +00:00
c4d6d6b991
Put a reference counter in the softc. Without this the driver might access
...
data that has been freed because the detach() routine returns to early.
1999-09-13 21:35:08 +00:00
ba2c2e2ade
* Make sure an aborted pipe is marked as not running.
...
* Start queued request in the right order.
* Insert some more DIAGNOSTIC sanity checks.
1999-09-13 21:33:25 +00:00
bc5da9a8da
Make sure timeouts count as interrupt context too.
1999-09-13 19:49:41 +00:00
ff6a476e6c
Rearrange the code a little so we can decide if we are in process
...
or interrupt context in a reliable way. Mainly used for DIAGNOSTIC.
1999-09-13 19:18:17 +00:00
eadd0f76da
Add needs-flag to ukbd. Fixes PR 8385 from Izumi Tsutsui
...
<tsutsui@ceres.dti.ne.jp>.
1999-09-12 17:40:57 +00:00
b1a719a6cc
Add a flag in the request to determine if the data copying is done by the
...
driver or the usbdi layer.
1999-09-12 08:23:42 +00:00
305998532f
Dot't forget to deactivate subdevices.
1999-09-12 08:21:49 +00:00
febf7ffb86
Display more verbose information about the command protocol and wire
...
protocol used by the device, e.g.:
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2
umass0: SCSI over Bulk-Only (iclass 8/6/80)
1999-09-12 02:40:59 +00:00
f696794a34
Hot-unplug works now.
1999-09-11 21:45:28 +00:00
f7c20484b6
- If a command fails, assume the device returned CHECK CONDITION status,
...
and issue a REQUEST SENSE. This fixes the media change problems I was
having w/ my USB ZIP drive.
- Clean up some debugging code.
- Implement more hot-unplug stuff.
1999-09-11 20:52:07 +00:00
ca8281fbcc
Pre-allocate the DMA buffer. This makes the driver slightly more efficient.
1999-09-11 10:40:07 +00:00
98b6524413
* Move DMA buffer allocation to HC independent code.
...
* Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.
1999-09-11 08:19:26 +00:00
90daa4736b
Comment out the GET_DEVICE_ID code, because for some unknown reason it
...
causes printing to fail sometimes.
1999-09-10 19:28:26 +00:00
6b9aae738e
Update doc URLs and fix a typo in umass_bulk_get_max_lun().
1999-09-09 17:12:03 +00:00
9bebdb616f
Remove some and add some.
1999-09-09 13:05:05 +00:00
8c655e84f2
An EXPERIMENTAL audio driver. It still needs work, e.g., in the mixer
...
part to give reasonable names to the mixer controls.
1999-09-09 12:28:25 +00:00
2aadcb5f47
Change the internal API to allow DMA buffers to be pre-allocated by
...
the device driver instead of happening automagically in the HC driver.
This affects both the HC-USBD interface as well as the USBD-device
interface.
This change will allow DMA buffers to be reused e.g. in isochronous
traffic.
Add isochronous support to the UHCI driver (not for OHCI yet).
1999-09-09 12:26:43 +00:00
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
1fed6ca851
Add Logitech QuickCam.
1999-09-02 22:07:29 +00:00
ba551e0c6a
Regen.
1999-09-02 19:17:57 +00:00
f6ae3ac6a9
Add some Entrega and Belkin serial adapters.
1999-09-02 19:13:43 +00:00
60179e2a13
Avoid null reference, from Nick Hibma, FreeBSD.
1999-09-02 18:13:50 +00:00
46fd81350a
Rewrite interrupt routine from clarity. From Nick Hibma, FreeBSD.
1999-09-02 18:11:41 +00:00
dea48ccdf9
Oops, back out stuff I didn't mean to commit.
1999-08-30 01:05:08 +00:00
a138de1eb5
Add detach goo; still needs work in the `scsibus' and further layers.
1999-08-30 01:04:31 +00:00
7a3bd0ab27
Add some missing request codes.
1999-08-29 22:45:41 +00:00
dd611fa302
Set openings to 1; only one command may be queued with the device at
...
a time.
1999-08-29 20:41:12 +00:00
54f6a91c01
Issue a Get Max Lun request to determine the max lun.
1999-08-29 19:58:55 +00:00
04cd1cc8ee
Make usbd_errstr() always return a useful error message; it's not like
...
the strings are that big.
1999-08-29 19:41:27 +00:00
d1088a5081
One more TODO item; sub-classes other than SCSI.
1999-08-29 18:58:03 +00:00
59e86c6637
Correct typo in URL. From Bill Sommerfeld.
1999-08-29 18:57:15 +00:00
f88e157ddb
Update the match routine to reflect that the driver actually matches
...
"Mass Storage/SCSI/Bulk".
1999-08-29 18:56:24 +00:00
e01cef341e
Update documentation references.
1999-08-29 18:13:26 +00:00
f91881f24a
Since we poll around the `done' member of a usbd_request, make it volatile.
1999-08-29 17:57:25 +00:00
cbd1c08a2c
Note a few TODO items.
1999-08-29 17:34:11 +00:00
246ab7936d
One item off this list done!
1999-08-29 16:53:04 +00:00
cbb4401dfd
Port the FreeBSD `umass' driver to NetBSD. This is still a work-in-progress
...
since a few things don't yet work properly:
- Sense data isn't reported properly (err, at all).
- It doesn't work with anything other than the Iomega USB Zip drive.
- Hot-unplug doesn't work yet.
...but this is enough to make my shiny new USB Zip drive go.
1999-08-29 00:30:08 +00:00
036a9c6974
Change some 'struct device' to 'bdevice'. From FreeBSD.
1999-08-28 21:42:35 +00:00
1aa63c9fab
Add some comments.
1999-08-28 10:04:01 +00:00
103e304a84
Add to the growing list.
1999-08-28 10:03:38 +00:00
2126f7df24
Change a type name.
1999-08-28 10:01:59 +00:00
598999e482
Fix from FreeBSD.
1999-08-28 10:01:42 +00:00
e470b13e28
Regen.
1999-08-28 10:01:19 +00:00
4b398d8f1b
Fixes/updates from FreeBSD.
1999-08-28 10:00:56 +00:00
65845c9e2a
Regen.
1999-08-25 23:23:33 +00:00
7529455612
Add a PS2 to Mac USB Adapter from P.I. Eng.
1999-08-25 23:23:17 +00:00
e0e1fbbe36
Regen.
1999-08-25 20:34:56 +00:00
02a79dc13e
Add Multitech MT5634ZBA. From FreeBSD.
1999-08-25 16:28:12 +00:00
205c3f5a73
Regenerate.
1999-08-24 21:25:52 +00:00
82cb092b79
Fix typo in comment.
1999-08-24 21:25:22 +00:00
1f2661798f
Make sure to mark the device as dying already in the (de)activate routine.
...
This avoids access to it before the detach routine has blown it away.
1999-08-23 22:55:14 +00:00
007da22e55
At attach time, get and print (parts of) the IEEE 1284 device id.
1999-08-23 22:35:19 +00:00
70020635c3
Regen.
1999-08-23 16:54:13 +00:00
c206e4ab37
Add a Kawatsu mouse.
1999-08-23 16:53:32 +00:00
592de98a19
Remove some unneeded needs-flag.
1999-08-23 07:07:47 +00:00
4c217fdaf8
Merge the soft_{td,ed} with the real {td,ed}. This saves time and space.
...
(And fix typo in corresponding uhci change.)
1999-08-22 23:41:00 +00:00
cc8b61583c
Merge the soft_{td,qh} with the real {td,qh}. This saves time and space.
1999-08-22 23:19:56 +00:00
be7e2fac07
More things to do...
1999-08-22 22:24:25 +00:00
1de0531d8b
Simplify ulptwrite() by calling usbd_bulk_transfer(). This also makes
...
it interruptible.
1999-08-22 22:22:43 +00:00
f747201099
Move more of the transfer completion processing to HC independent code.
...
Fix some problems with transfer abort & timeout.
1999-08-22 20:12:39 +00:00
a293a6cc73
Make sure not to call tsleep() from suspend/resume routine.
1999-08-20 16:42:38 +00:00
f28eb7f5cc
make alpha compiler happy
1999-08-19 21:29:04 +00:00
0f99933822
Use the right type for the size argument when calling usbd_bulk_transfer().
1999-08-19 19:57:21 +00:00
a9563e089b
A first stab at making the UHCI driver endian independent.
...
(It doesn't seem to be quite working yet.)
1999-08-19 19:52:38 +00:00
c0f0486836
Add a utility function, usbd_errstr(), to print error strings. From FreeBSD.
1999-08-19 19:51:36 +00:00
462e2614ff
Add some mass storage definitions.
1999-08-19 19:50:42 +00:00
bf35d2940c
Add some more items.
1999-08-19 00:31:40 +00:00
1107c3f6ea
Back out last change. The ugliness of the Audio Class should not have
...
to pollute the general USB definitions.
1999-08-18 07:55:19 +00:00
7fb139742d
Update the endpoint descriptor struct with the two oddball entries
...
that only the Audio Class has.
1999-08-18 07:45:56 +00:00
54adf47f36
Redo the UHCI data toggle handling.
...
Make sure data toggles get synchronized on open and
when clearing an endpoint stall.
1999-08-17 20:59:04 +00:00
3016e1ebe0
Make some small changes to make it compile on OpenBSD.
1999-08-17 16:06:20 +00:00
24f66ce158
Get rid of FreeBSD code; there was so little to share in this driver
...
that it should be split.
1999-08-16 23:36:25 +00:00
9a0281ff87
Some new ioctl()s for the umodem driver.
1999-08-16 20:27:55 +00:00
aa7264892d
Implement a modem driver for the Abstract Control Model, i.e. AT commands.
...
It is accessible through the usual tty abstraction.
XXX The driver needs better error handling and a special call device.
XXX It also needs more testing.
1999-08-16 20:26:53 +00:00
290c03447b
Change the way transfers are dequeued so thet we know that they
...
are removed from the queue before being deallocated.
1999-08-16 20:24:33 +00:00
23fa3682af
Remove some, add some.
1999-08-16 20:21:09 +00:00
72b1f5a4b0
Add more CDC definitions.
1999-08-16 20:20:19 +00:00
7e4e93390d
Change DIAGNOSTIC behaviour a little.
1999-08-16 20:19:55 +00:00
df65083b45
A small roadmap of the USB files.
1999-08-16 20:18:07 +00:00
b8b1e35ece
Some changes from FreeBSD (no functional differences).
1999-08-14 14:49:31 +00:00
b23490d39f
Implement timeout and abort of requests.
...
Compute length of short transfers correctly.
1999-08-14 08:56:09 +00:00
38de172f03
Add usbd_set_hub_feature() and usbd_clear_hub_feature().
1999-08-07 23:14:17 +00:00
d6331b4ef4
Some new items.
1999-08-07 15:05:46 +00:00
208dad78d1
Get data toggle right for short bulk transfers.
...
(XXX This code needs to be rewritten.)
1999-08-02 23:35:55 +00:00
caffcd4895
Another debug message.
1999-08-02 19:49:50 +00:00
2d4d29a1fa
Test return values the right way.
1999-08-02 19:36:48 +00:00
094852eb36
Change it so that a pipe can be open RW instead of just R or W.
...
This makes close() work properly, but it is still not ideal. Perhaps
there should be different device nodes for input and output on to
and endpoint with the same number?
Pay attention to the SHORT_XFER_OK ioctl().
1999-08-02 19:32:56 +00:00
d2db832909
Do abort of transfers in a sane way. Fixes PR 8041.
1999-08-02 19:30:34 +00:00
09e76a1645
Remove two items that are done.
1999-07-30 11:40:19 +00:00
4047458551
More DIAGNOSTIC messages.
1999-07-24 01:40:19 +00:00
021319d9b3
Avoid crashing if we are forced to close() before teh open() completed
...
(can happen on disconnect, probably due do dubious logic in vdevgone()).
1999-07-14 19:12:07 +00:00
361422bc96
Apply some bulk transfer bug fixes from FreeBSD.
1999-07-12 05:22:50 +00:00
7b3258b6a7
Make the kthread API a bit more friendly to loadable kernel modules.
1999-07-06 21:44:09 +00:00
319c42848d
Add some sanity checks.
1999-07-06 07:12:03 +00:00
b177c7a397
Totally redo the way device detach is done. It now uses a kernel event
...
thread and the config detach method.
Squish a number of space leaks on detach.
1999-06-30 06:44:22 +00:00
622f3d3db5
Regen.
1999-06-28 04:10:26 +00:00
f69aea19d2
Add some weirdo modem.
1999-06-28 04:09:53 +00:00
b2c4582d6d
Regen.
1999-06-26 16:26:57 +00:00
0ddfad8dfa
"www.usb.org" says that:
...
a) Logitech has vendor ID 0x046d.
b) That vendor ID 0x05ac is Apple Computer.
1999-06-26 16:26:20 +00:00
6e72bbdb8a
Regen.
1999-06-26 15:21:17 +00:00
62f6e7122f
Correct description of vendor "LOGITECH": this is not Apple.
1999-06-26 15:20:53 +00:00
3fd5344a95
Add suspend/resume handling to the UHCI driver.
...
Currently it only works if the BIOS saves enough state of the controller.
Once I find a machine with a dumber BIOS I'll try to improve that.
1999-06-26 08:30:17 +00:00
701eca7576
Remove unneeded #include.
1999-06-26 03:14:25 +00:00
7ef0c8eef3
Add a quirk for mice with reversed Z-axis.
1999-06-26 00:09:15 +00:00
55fbc23acc
Regen.
1999-06-26 00:08:15 +00:00
c4c81ec6fa
Add another Logitech mouse.
1999-06-26 00:07:35 +00:00
475ed73e46
Get rid of a bunch of code that was part of an old USBDI proposal, but that
...
is unused in our USB stack.
Once upon a time, when I started writing the USB stack for NetBSD, there
was an effort to make a standard for how USB device drivers should interact
with the rest of the USB stack. This effort had contributors from just
about all Un*x camps (but not Micro$oft :). I based my design on one of their
early proposals since I thought it would be a good idea if we could all
share device drivers with a minimum effort. Shortly after I started my work
all the free Un*x people were thrown out of the USBDI work since we did not
pay the USB membership fee. Well, some time has passed now and the work of
the standardization group is almost public again. But alas, the new standard
has grown to be a monster! I do not want to have this as the basis for the
*BSD USB stack; it is far too complicated.
So, since we are not even close to being compilant with the standard, I've
thrown out some old baggage.
1999-06-14 17:09:57 +00:00
656245dc18
Check that the hub ports actually power up.
1999-06-14 16:59:47 +00:00
9f43c5a1f2
If we're the console keyboard, automatically enable the keyboard.
...
Should fix part of console keyboard problems on macppc. The usb keyboard will
now work on boot! Doesn't fix problems with keyboard freaking out when
changing LED state.
Thanks to Mattias & Lennart & Tsubai for input on resolving this problem.
1999-06-11 19:05:13 +00:00
c65a504ed5
Add more debug.
1999-06-10 15:48:27 +00:00
2959234be5
Fix a bug in bulk input. Discovered by Joel Chen <jchen@liberate.com>.
1999-06-09 22:57:16 +00:00
cd0a68c3f6
Fix use of & when % was appropriate.
1999-06-09 19:40:54 +00:00
27b9cd0724
Remove a redundant test.
1999-06-09 17:04:45 +00:00
d80294fead
Regen.
1999-06-05 14:14:42 +00:00
c5255e5a48
Remove vendor from one of the descriptive strings; it's superfluous.
1999-06-05 14:14:02 +00:00
0e2edfb67a
Very small formatting nit.
1999-06-05 13:43:03 +00:00
e9fe988d72
Regen.
1999-06-05 09:54:29 +00:00
1c05aff552
Add Brother HL-1050 laser printer. Fixes second half of PR kern/7699
...
by Bjoern Labitzke.
1999-06-05 09:54:09 +00:00
ac197c5354
Update documentation URLs.
1999-05-21 10:15:23 +00:00
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
3d6c3b5c03
Update for TI vendor id.
1999-05-20 09:51:13 +00:00
5d6176a144
Regen.
1999-05-20 09:50:39 +00:00
d25385e28e
Change vendor of id 0x0451 to Texas Instruments.
1999-05-20 09:50:09 +00:00
29184c350f
Add a few more Communication Interface Class subclasses (including Ethernet
...
and *shudder* ATM).
1999-05-18 23:42:56 +00:00
011be0080e
Add vendor/product/release locators. Added in frustration as my HID
...
devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 13:51:05 +00:00
041a8536ac
s/revision/release/
1999-05-16 12:05:10 +00:00
00930acefa
Improve error handling. Mostly from FreeBSD.
1999-05-16 11:43:32 +00:00
9bf01fcbe5
Fix debug printf.
1999-05-14 19:38:44 +00:00
0d0cc4aa14
Rework the way ukbd attaches itself as the console (again). We now allow
...
the code to pick the first USB keyboard instance as the console, ignoring
which USB controller it's on. Should eventually allow detaching of the
console keyboard.
From Jason Thorpe <thorpej@nas.nasa.gov>
1999-05-13 23:34:38 +00:00
e16867970c
More DIAGNOSTIC tests.
1999-05-13 23:29:41 +00:00
aed277e3de
More digitizer defines.
1999-05-13 23:29:11 +00:00
d480a15932
Regen.
1999-05-11 09:56:56 +00:00
91e572f76d
Another mouse.
1999-05-11 09:56:32 +00:00
ea2a114cf0
Fix a serious bug in bandwidth accounting that thrashed memory.
...
Thanks to Joel Chen <jchen@nc.com> for tracking it down.
1999-05-09 22:48:35 +00:00
69e451c1ce
Call ws routines at spltty() from interrupt routines.
1999-05-09 15:10:30 +00:00
aaa0308140
Handle exclusive open bit differently.
1999-05-09 14:38:01 +00:00
d11fcba216
More debug.
1999-05-09 14:37:18 +00:00
63e051b6cf
Minor rearrengment for better readability.
1999-05-09 14:36:42 +00:00
86bb7f7d58
Add some Mass Storage constants.
1999-05-09 14:35:50 +00:00
augustss