sato
ee8000c4ad
check NBIVIDEO.
2000-10-02 04:15:51 +00:00
sato
3c83f44fa3
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak
2000-10-02 04:14:59 +00:00
sato
59de160368
- DPRINTF -> VPRINTF for verbose.
...
- don't attach other video driver under hpcfb.
2000-10-02 04:03:06 +00:00
sato
938b01e688
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,
2000-10-02 03:57:53 +00:00
itojun
dcfe05e7c1
fix compilation without INET. fix confusion between ipsecstat and ipsec6stat.
...
sync with kame.
2000-10-02 03:55:41 +00:00
itojun
8524eab4d4
fix paren/#ifdef match.
2000-10-02 03:54:53 +00:00
itojun
dd859d3462
enable VJC only with INET
2000-10-02 03:54:10 +00:00
itojun
b8453a0291
fix compilation without INET
2000-10-02 03:53:47 +00:00
itojun
1af3d80bce
fix compilation without INET.
2000-10-02 03:53:07 +00:00
itojun
412b3abb5f
fix IPv6 packet manipulation. (use ip6intrq)
2000-10-02 03:52:10 +00:00
itojun
253515cca1
cosmetic; repair indentation
2000-10-02 03:51:18 +00:00
sato
a50307118c
add sigmarion cmdmap and use it.
2000-10-02 03:45:10 +00:00
thorpej
4a66a476e9
Make the previous code path simpler (and possible easier for the
...
compiler to optimize), based on fddi_input().
2000-10-01 23:43:44 +00:00
thorpej
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
thorpej
8dc841aa19
Change the behavior of ifpromisc() slightly. If interface is not IFF_UP,
...
attempting to enable promisc would result in ENETDOWN. Change this to
allow the interface to always be placed in promiscuous mode, regardless
of IFF_UP. When the interface does come up, the IFF_PROMISC flag will
be consulted, and this matches the behavior that disabling promiscuous
mode has.
2000-10-01 23:16:07 +00:00
pk
d26132e2be
cpu_initialize: global registers aren't preserved across calls to
...
prom_printf(), so replace %g3 with %l7 (which isn't used despite
the `usage' comment).
Also, clean up white-space turds.
2000-10-01 19:13:16 +00:00
tsubai
442b9b5df2
Get the correct OF node of the screen because PowerBooks have two screens
...
in one PCI device.
2000-10-01 19:08:30 +00:00
uch
f88fbde7ac
don't reset RTC in tx39clock_set()
2000-10-01 18:12:04 +00:00
fvdl
f47a0f34f9
Squeeze even more by removing some COMPAT_1X options, com* (serial
...
ports aren't supported for installation), MFS, slip and ppp. There
was no room for pppd and slattach on the "tiny" floppies anyway, so
there was nothing to use them.
Add pcic at isa, pcmcia, wdc at pcmcia, and 'wireful' cards @ pcmcia
(ne, ep, mbe, sm). Installing is now possible on a 4M laptop over
ethernet (tested with ep at pcmcia, and 640+3200 available memory).
2000-10-01 16:20:01 +00:00
itojun
3e401aa14d
upl(4) is a IPv4 only device.
2000-10-01 11:35:28 +00:00
itojun
b2366d4898
add missing \n. sync with kame.
2000-10-01 10:56:02 +00:00
scottr
2c7ec6839c
In ems_init(): make sure there's valid data in the buffer after sending
...
a TALK command to a device. Noticed by Ken'ichi Ishizaka.
2000-10-01 05:10:57 +00:00
takemura
ccac45b532
Modify keymaps of MC-R and MC-CS series to add backlight control keycommand.
...
Modify keymap of btnmgr to add backlight control keycommand.
Add backlight control function to bivideo.
2000-10-01 03:45:33 +00:00
takemura
dcfcbaf8ae
- Add ioctl commands to wsdisplay which set/get some LCD status,
...
backlight, brightness and contrast.
- Add 9 command key symbols which make wskbd to call wsdisplay's
iocontrol.
- Add special key map variant KB_MACHDEP. This variant does not
have any real keymap but it's just a placeholder for machine dependent
maps which will be overwrite by machine dependent keyboard driver.
2000-10-01 03:29:12 +00:00
leo
d7e0d02e8b
Add include of <machine/asm.h>. C_LABEL is defined there.
2000-09-30 20:40:34 +00:00
leo
ec2e9cd4c8
Add PCB_REGS_* defines. This makes ddb compile again.
2000-09-30 20:36:40 +00:00
fvdl
890dedaed3
Set the # of ptys to 2.
2000-09-30 13:25:12 +00:00
eeh
8e5075103f
This seems to fix the interrupt lossage of non-debug kernels.
2000-09-29 17:02:38 +00:00
tsutsui
cdb3d9df80
Add sip* at pci.
2000-09-29 14:45:59 +00:00
fvdl
2e6f523813
Bump CPU_MAXFAMILY to 7.
2000-09-29 14:17:17 +00:00
fvdl
3cb9873a8d
Recognize Pentium 4. Treat everything with model > 6 as model 7 for now,
...
in the hope that Intel doesn't start number backwards now that they
picked 15 for the P4.
2000-09-29 14:16:23 +00:00
ad
50cf734d26
(*minphys)() musn't return zero.
2000-09-29 13:27:12 +00:00
fvdl
243ae4806b
oops, typo in previous (|| -> &&)
2000-09-29 13:15:48 +00:00
fvdl
33234ff066
Don't print anything when the serial number is not supported. There are
...
a lot of other features that may not be supported either, no need to
print them.
2000-09-29 13:05:12 +00:00
wdk
caccbc2e21
Add kernel support for memory disks
2000-09-29 12:43:14 +00:00
tsubai
e256cfb9ec
Fix a bug that prevents the kernel from detecting the root device.
2000-09-29 10:14:20 +00:00
explorer
62da00b60c
clean up printing when serial number not supported or disabled.
2000-09-29 09:07:53 +00:00
explorer
be5f26e138
print CPU serial number at boot time. After all, we have a million other flags printed, what's one more interesting one.
2000-09-29 09:03:18 +00:00
msaitoh
3c5d2c7fac
avoid SH7709A's serious bug (it fails to read IPR* registers under particular
...
circumstances)
2000-09-29 08:08:37 +00:00
deberg
623e319553
add support for 12-bit color displays, from Timm Wetzel w/ changes by
...
me. closes 10741.
2000-09-29 06:35:57 +00:00
deberg
a295f43fb1
merge lines
2000-09-29 06:33:37 +00:00
deberg
b01c657c80
add RCONS_BPP16 for color display
...
also lose esp0 since i have no disc in this machine, and build symbols.
2000-09-29 06:33:17 +00:00
deberg
44c2ad4763
add RCONS_BPP16 for color display
2000-09-29 06:32:38 +00:00
deberg
9a37177d17
fix 16BPP support (for next68k), from Timm Wetzel.
2000-09-29 06:29:47 +00:00
mellon
b58f5e5835
- Figure out how long if list buffer needs to be if it's too short (fixes
...
PR#10968).
2000-09-29 00:37:37 +00:00
eeh
15eaba378c
Only call pcons_dopoll() if there's a pcons device.
2000-09-29 00:27:13 +00:00
eeh
5c98160d2b
Separate user and kernel address spaces and move the kernel down to
...
0x0000000001000000 -- 0x00000000f0000000, below the PROM where the
PROM thinks we should be.
2000-09-28 19:56:13 +00:00
eeh
d21456569e
Fix INTR_SETUP() to properly distinguish kernel and user addresses.
...
Make microtime() return the correct time on %tick machines.
Re-enable debug stuff in dostart for now to detect kernel mapping issues.
2000-09-28 19:27:49 +00:00
eeh
1090c8a9cf
probeget() actually handles 64-bit values so fix the prototype.
2000-09-28 19:16:35 +00:00
eeh
1ecf6779be
Add support for variable end of user stacks needed to support COMPAT_NETBSD32:
...
`struct vmspace' has a new field `vm_minsaddr' which is the user TOS.
PS_STRINGS is deprecated in favor of curproc->p_pstr which is derived
from `vm_minsaddr'.
Bump the kernel version number.
2000-09-28 19:05:06 +00:00