Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
43,970 Commits 606 Branches 0 Tags 3.1 GiB
ecdc99eb5f
Commit Graph

921 Commits

Author SHA1 Message Date
matt
bf8783afa4 Fix the receive length so it includes the extra bytes in the fddi_header. 1998-09-28 20:37:12 +00:00
matt
43b462df88 Insert the FDDI control bytes in pdq_ifstart before we load the dmamap 
and dmasync the data.  Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
 1998-09-28 18:01:43 +00:00
matt
a1528c368d Fix transmit handling (this also should speed up transmits 
slightly).
 1998-09-28 17:13:54 +00:00
dante
b2a68e14db Change sources to be KNF 1998-09-26 19:53:34 +00:00
dante
da0a3e615e Add support for AdvanSys Ultra Wide boards ABP-9xxUW 1998-09-26 16:09:32 +00:00
dante
c6ccd1d83f Remove Wide boards references 
Adjust copyright

At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
 1998-09-26 16:02:56 +00:00
mark
7d6c07a559 Use the data32iot and data32ioh members of the wdc_attachment_data 
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
 1998-09-22 00:27:51 +00:00
mark
962edcdc03 Add data32iot and data32ioh members to the wdc_attachment_data structure. 
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
 1998-09-22 00:21:16 +00:00
pk
0b10e1ddab Parallel port support routines. 1998-09-21 21:26:51 +00:00
matt
ad921921e4 Add softserial to the alpha port. This significantly improved PPP 
throughput on com ports.
 1998-09-21 00:33:16 +00:00
matt
08e1d890a4 Changes so that BPF readers will get the data in fddi packet aligned along 
normal boundaries.  This makes tcpdump much happier.
 1998-09-20 02:36:08 +00:00
matt
935fbed4fe Make sure data in FDDI packets are aligned nicely (for alpha, etc.) 1998-09-19 21:21:25 +00:00
mjacob
1dac5b5291 Several changes, including some stub fibre target mode stuff. Establish 
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
 1998-09-17 23:05:46 +00:00
mjacob
a0a31568e8 cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro 1998-09-17 22:52:54 +00:00
mjacob
0e0010df41 cleanup header to be just NetBSD 1998-09-17 22:52:14 +00:00
mjacob
cb787c768d add some target mode definitions 1998-09-17 22:51:54 +00:00
mjacob
24717f3c3a cleanup header to be just NetBSD 1998-09-17 22:50:53 +00:00
is
95807e512a Garbage collect unused 3rd parameter to comprobe1(). 1998-09-16 21:30:58 +00:00
scottr
7aa4d4483e Revert the last change: returning COMPLETE is clearly the wrong thing to do 
if we weren't polling to begin with.
 1998-09-16 05:36:35 +00:00
scottr
0af57c2461 Correct a serious problem that affects at least front ends that can only 
use PIO (or equivalent) code to do asynchronous transfers:  In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so.  This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
 1998-09-14 05:56:14 +00:00
mycroft
32f42fe1e9 Make sure all voices are deallocated on close. 1998-09-13 04:41:34 +00:00
jonathan
ea4898c76c Add arc as a target platform. 1998-09-11 19:39:28 +00:00
kenh
9539399333 Add support for passing device quirks from the attachment routine, 
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
 1998-09-10 19:24:45 +00:00
mjacob
4a1ccd2fe7 turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case 1998-09-10 17:10:27 +00:00
thorpej
9ce5ae6b97 Protect Debugger() call a'la uha driver. PR #6070, Gary D. Duzan. 1998-09-09 05:28:58 +00:00
thorpej
d1fba4e7e5 Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt 
context.  Reported by Lennart Augustsson.
 1998-09-09 05:17:53 +00:00
mjacob
a79310ba38 Major reworking of initialization code, addition of NVRAM reading, usage 
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
 1998-09-08 07:28:50 +00:00
mjacob
6e2341ae63 Roll major revision. Change some definitions around. Add more current device 
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
 1998-09-08 07:27:04 +00:00
mjacob
542648bf0e Move all ASYNC definitions here (after all, they're mailbox registers). 
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
 1998-09-08 07:24:23 +00:00
mjacob
170521610e Add more ASYNC event codes here. Add NVRAM definitions. 1998-09-08 07:22:06 +00:00
mjacob
c0eabb441f add case for going from probetime to runtime speeds 1998-09-08 07:19:58 +00:00
mjacob
9752520872 roll revision, change default tagging to simple tags 1998-09-08 07:18:56 +00:00
pk
b871ab5f2c Use the new "%b" format for the various control register bits. 1998-09-06 21:39:33 +00:00
christos
344ed1eaef Assign copyright to TNF. 1998-09-05 14:20:01 +00:00
mark
ba8c6b9828 arm32 now supports soft serial interrupts. 1998-09-05 04:25:35 +00:00
is
a3ee69c87a Split SMC chipset ARCnet driver into 
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
  using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
 1998-09-02 22:32:06 +00:00
pk
380e88d4f0 Adjust some comments. 1998-09-01 22:56:00 +00:00
jeremy
6693724a83 Changed inaccurate comment on the sc_freq member of the driver's softc 
structure.  The frequency is represented in MHz rather than Hz. [PR/6805]
 1998-09-01 22:22:03 +00:00
pk
fec2fa9e43 Typo in device Id mask. 1998-09-01 21:04:43 +00:00
cgd
d58173741d kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port 
used it, and it's non-working and apparently slated for replacement.)
 1998-08-31 22:28:04 +00:00
pk
860867bfec macro argument protection. 1998-08-31 11:13:10 +00:00
pk
73b946e04e LSI64854 DMA engine driver. 
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
 1998-08-29 21:42:03 +00:00
dante
17759893b0 Add rcs id 1998-08-29 13:44:49 +00:00
thorpej
370a38c007 Add braces to make egcs happy. 1998-08-28 20:03:10 +00:00
thorpej
f3bfb08d45 When determining the default media on the Vortex/Boomerang, don't pick 
the full-duplex variant.  XXX We should check the EEPROM for "default to
full-duplex".
 1998-08-28 18:16:02 +00:00
pk
b1447741da Nuke Dprintf; fix formats. 1998-08-28 08:59:14 +00:00
pk
dd0709d28d Add selected `%b' bits. 1998-08-27 20:05:11 +00:00
pk
142bff0170 Add missing entries and make it slightly more verbose. 1998-08-27 19:53:02 +00:00
pk
b3279eb3dc Move a few prototypes. 
Whitespace cleanup.
 1998-08-27 18:45:12 +00:00
pk
fc397afa14 debug level 0 1998-08-26 15:06:37 +00:00