ad
e6be92ad99
Pull in dev/i2o/files.i2o.
2000-11-08 19:48:51 +00:00
ad
5854b30016
Add glue for iop.
2000-11-08 19:46:27 +00:00
ad
3785a081f1
Recurse into i2o/.
2000-11-08 19:45:49 +00:00
ad
d49fd13524
Add support for I2O adapters and SCSI/FC-AL/BSA class devices. This needs
...
more testing with different configurations, and work in a number of areas
(which I'm not able to do for a little while), but is at least functional
and stable on i386 with DPT adapters.
2000-11-08 19:45:30 +00:00
hubertf
dca9c22e0c
in SEE also, xref newfs_lfs(8), sort entries and seperate by ","
2000-11-08 19:45:08 +00:00
hubertf
1320b80b0e
xref lfs_cleanerd(8) in SEE ALSO
2000-11-08 19:43:16 +00:00
hubertf
cf64122954
xref dump_lfs(8), newfs_lfs(8) in SEE ALSO
2000-11-08 19:40:04 +00:00
matt
6c15ee2986
avoid pointer addition on void pointers
2000-11-08 19:38:12 +00:00
hubertf
4fdbe215a1
In SEE ALSO:
...
* it's dump_lfs(8), not dumplfs(8)
* xref mount_lfs(8)
2000-11-08 19:37:46 +00:00
matt
918971bc20
Initial import of some of the definitions for the Serial Bus Protocol V2.
...
Which is used for SCSI over IEEE1394.
2000-11-08 19:27:08 +00:00
ad
891c4efd74
- Pull in some updates from FreeBSD - mainly clarifications. Thanks to
...
Mike Smith <msmith@freebsd.org> for pointing these out.
- Ensure that we get AENs: reserve one CCB/command block for parameter
retrieval, and chain AEN retrievals that are the result of an interrupt.
2000-11-08 19:23:50 +00:00
ad
142ab5b1ec
Move lsu stuff to more logical locations, and push queueing into the lsu
...
driver.
2000-11-08 19:20:33 +00:00
ad
5959ab8f01
Define SCBUSIOLLSCAN: perform a low-level bus scan.
2000-11-08 19:09:30 +00:00
matt
d0c3ebd9d8
Make the test for dmareg >= 0x10000 quirked on IDE_16BIT_IOSPACE
2000-11-08 18:22:27 +00:00
kleink
3ba9e614c1
Markup buglet.
2000-11-08 18:19:19 +00:00
wrstuden
88cbfbe36d
Move guts of pciide_print_modes() to wdc_print_modes() so that non-pciide
...
wdc drivers (like macppc's obio IDE interface) can use it. Also add
support to both wd attach line and to wdc_print_modes() to print
Ultra/{33,66,100} for respective UDMA modes (From Manuel Bouyer).
2000-11-08 17:57:36 +00:00
tsubai
a88f368787
defopt L2CR_CONFIG.
2000-11-08 17:53:46 +00:00
wrstuden
10c4684193
Use wdc_print_modes() so that we get to see what DMA modes
...
are used with a drive.
2000-11-08 17:50:44 +00:00
itojun
5314e970c4
gettextize removed from our tree (see comment for
...
src/gnu/usr.bin/gettext/Makefile change)
2000-11-08 16:28:00 +00:00
itojun
c2d7c0e321
gettextize works only if we have /usr/pkg/share/aclocal/gettext.m4 and friends,
...
and it does not make sense to install it.
From: Matthias Scheler <tron@zhadum.de>
2000-11-08 16:26:46 +00:00
thorpej
d764c4d540
One more fix to multicast hash computation. Submitter confirms that
...
with this fix, multicast does indeed work properly on the EPIC.
From Zdenek Salvet <salvet@ics.muni.cz>.
2000-11-08 15:20:29 +00:00
ad
9793e67554
1.5J: hashinit() change, addition of p_emuldata to `struct proc'.
2000-11-08 14:53:23 +00:00
tsutsui
25c36dbbbf
Remove an unneeded include.
2000-11-08 14:37:08 +00:00
ad
642267bcc7
Update for hashinit() change.
2000-11-08 14:28:12 +00:00
ad
5fcf59fd7c
Allow for creation of both LIST and TAILQ based hashes by adding a `hash
...
type' argument to hashinit().
2000-11-08 14:25:23 +00:00
lukem
ae840bf480
improve description of configuration lines
2000-11-08 13:27:44 +00:00
lukem
7617fc3115
- provide example of line syntax
...
- improve formatting and macro use
2000-11-08 13:18:28 +00:00
lukem
79b4c08d55
minor update of /boot; from simonb
2000-11-08 12:53:42 +00:00
wiz
f780ab4671
Fix example; problem report and solution by Jim Bernard in PR 10259.
2000-11-08 12:53:14 +00:00
itojun
9df2062a31
- fix -s with small number (like < 8). kame 1.97 -> 1.99
...
- add fflush. kame 1.96 -> 1.97
- alpha friendly (printf format - %ld and others) kame 1.93 -> 1.94
sync with kame
2000-11-08 12:05:09 +00:00
wiz
ad47ffa40a
add amd.conf.5
2000-11-08 12:03:06 +00:00
wiz
efad173586
Add amd.conf.5 from dist/am-utils/scripts here, and install it.
...
Fixes PRs 5051, 7524, 8999, 10814.
XXX: Why are amd & friends not using reachover Makefiles, but a copy of
the source? This should be fixed...
2000-11-08 12:00:48 +00:00
wiz
f48466d127
Fix some obvious typos.
...
XXX: Casing isn't very consistent here.
2000-11-08 11:28:01 +00:00
wiz
aade753574
Remove files/directories that are in more than one set from one of them.
...
Fixes PR 11138 by Jun-ichiro itojun Hagino.
2000-11-08 11:11:28 +00:00
wiz
8889eeece7
obsolete /etc/disklabels (files now in /var/backups/disklabel.*)
2000-11-08 10:49:27 +00:00
jdolecek
458d7b0e00
adosfs_mountfs(): check for zero amp->secsperblk before dividing by it (which
...
would cause trap and panic); it might be invalid if the mounted filesystem is
not actually adosfs.
This fixes kern/11335 by Petri Koistinen.
2000-11-08 08:06:24 +00:00
itojun
bfef63a365
do not print "PIM" twice
2000-11-08 07:23:54 +00:00
lukem
dc702cca7b
update to reality:
...
- add /boot, /etc/*.conf, /etc/defaults, various bits in /usr/src and /sys,
/var/cron, /var/heimdal, /var/pkg, /var/yp
- remove /etc/disklabels, /usr/src/domestic
2000-11-08 06:44:06 +00:00
itojun
cbfaeab846
"make benchmark" will run a tiny benchmark test.
2000-11-08 06:02:01 +00:00
onoe
5b19fc8512
Add powerhook and shutdownhook to support Notebook.
...
Use PAGE_SIZE instead of OHCI_PAGE_SIZE for each DMA mem.
OHCI_PAGE_SIZE(2kB) will be round up PAGE_SIZE, anyway.
XXX: need more sophisticated way to manage buffer.
Clear IntEvent first not to lose SelfIDCompleted in multiple bus reset.
Be careful not to clear BusReset int event in SelfID duration to follow
the OHCI spec.
Initiate BusReset if selfid is not completed within 3sec after busreset.
2000-11-08 06:00:18 +00:00
chs
ff1e758c8c
use round_page(...) instead of roundup(..., NBPG).
2000-11-08 05:53:10 +00:00
chs
a74393b970
remove unneeded includes.
2000-11-08 05:47:56 +00:00
chs
071195415e
fix an LP64BE bogon.
2000-11-08 05:29:32 +00:00
chs
51c256aa5a
in nfs_flush(), only play games with B_NOCACHE for VREG vnodes.
...
if we do this for VBLK vnodes which are in use by softdep mounts,
brelse() will mark the buffer B_INVAL as well, which makes the
softdep code very unhappy.
2000-11-08 05:20:32 +00:00
chs
a284236c04
in fork1(), only add make the new proc visible (by giving it a pid
...
and adding it to allproc) after it's fully initialized.
this prevents the scheduler from coming in via a clock interrupt
and tripping over a partially-initialized proc.
2000-11-08 05:16:23 +00:00
itojun
b7192d086c
move WARNS to ../Makefile.inc
2000-11-08 05:14:56 +00:00
itojun
2ce9195af1
set WARNS?=1. fix error trap in rijndael test. sync with kame
2000-11-08 05:08:55 +00:00
itojun
e452bf6c6b
save a little bit of CPU time (avoid computing CBC IV we do not use).
...
sync with kame.
2000-11-08 04:57:57 +00:00
erh
1f16400706
Update the names of some unimplemented syscalls to match what linux calls them. Match const in parameters to our sys_writev.
2000-11-08 04:19:00 +00:00
itojun
20efc85de8
does not support non-IPv4.
2000-11-08 02:56:26 +00:00