2f4a483dfc
Use make -C instead of cd && make; this is done to preserve the logical path
...
for debugging info DW_AT_comp_dir
2017-02-07 21:18:05 +00:00
7e6c542685
add +
2017-02-02 20:49:55 +00:00
8fb3f05024
set 7 and 8 to close on exec.
2017-02-02 20:01:36 +00:00
3d09c58a4d
MAKE varies between builds because it contains the full pathname.
2017-01-24 17:54:52 +00:00
9f6b4eb870
Add carp as an alias for vrrp - after all, we do not ship vrrp, but we
...
do ship carp(4).
Restore the pfsync entry that was added with 1.20, then wiped out by
the 1.21 import. Please merge any wholesale imports properly.
Remove http://www.sethwklein.net/projects/iana-etc/ which 404s.
Should fix PR bin/51568
2017-01-16 09:39:26 +00:00
b69d605610
Update Clang header directory.
2017-01-11 12:10:48 +00:00
da97bc8466
"kod" needs limited.
2017-01-09 20:05:29 +00:00
583c58130b
fix nsd home dir.
2017-01-09 14:26:58 +00:00
b575a4238e
Instead of hard-coding all the MK* vars and constantly being out of date,
...
use _MKVARS.yes and _MKVARS.no to construct them.
2017-01-08 17:39:08 +00:00
9b4226cef8
add nsd npfd
2017-01-07 22:37:22 +00:00
09e56bb693
add nsd
2017-01-07 19:55:35 +00:00
48a80eb186
npflog0.pcap is binary
2017-01-07 18:50:50 +00:00
836d3605fd
rotate npflog0.pcap
2017-01-07 16:34:50 +00:00
03aa6dbf80
Add CUBOX to v7 and v7hf.
2017-01-07 16:29:04 +00:00
71cba524e4
add scripts for npfd
2017-01-05 14:39:09 +00:00
9b0b62c8b6
Add mixerctl test directory
2017-01-02 20:37:12 +00:00
9287afda0f
Add blacklistd.conf so it gets backed up, too.
2016-12-27 17:13:45 +00:00
4bb5b9d374
Add npf.conf so it gets backed up.
2016-12-27 16:48:12 +00:00
9388ae5cb6
put also MAKEFILES in the MKREPRO section since they vary since they contain
...
paths.
2016-12-25 16:44:39 +00:00
ca8ef46246
Make precedence between {cat,man}[39]{,lua} logical:
...
- Search man3 right after cat3, before cat3lua (and man3lua).
- Search man9 right after cat9, before cat9lua (and man9lua).
2016-12-25 12:10:52 +00:00
700b0bb18f
For MKREPRO, don't print varying params.
2016-12-24 20:36:28 +00:00
e640aa5924
create sysmon nodes, so wdogctl works.
2016-12-24 07:07:06 +00:00
b8092d5dfa
Add regs1 in arch/i386/t_ptrace_wait*
...
regs1:
Call PT_GETREGS and iterate over General Purpose registers
Sponsored by <The NetBSD Foundation>
2016-12-13 18:00:10 +00:00
5e8d31ff24
Attach t_exect to ATF tests and distribution
...
Add missing SIGTRAP handler. Assert there that the signal is SIGTRAP as
expected and si_code TRAP_TRACE.
This test will break on some ports that have dummy or incomplete
implementation of exect(2).
This test works on amd64 correctly.
Sponsored by <The NetBSD Foundation>
2016-12-09 06:12:02 +00:00
4bb9801b95
spkr->speaker. Found by kamil@
2016-12-08 20:44:24 +00:00
03783bb56a
Add a synthesized pc beeper and keyboard bell for platforms with an audio
...
device.
2016-12-08 11:31:08 +00:00
97d3c24f2a
Preliminary support for LUNA's HD647180X I/O processor (a.k.a. XP).
...
Demonstrated as "PSG tunes / PCM wav player on LUNA"
(using Z80 PSG/PCM drivers ported from NEC PC-6001)
at OSC2016 Kyoto and OSC2016 Hiroshima:
http://mail-index.netbsd.org/netbsd-advocacy/2016/08/01/msg000712.html
http://mail-index.netbsd.org/netbsd-advocacy/2016/11/29/msg000724.html
2016-12-03 17:38:02 +00:00
96cf2030eb
Refactor location of amd64-specific ATF tests to new dir kernel/arch/amd64
...
Rename
- tests/kernel/t_ptrace_amd64_wait.c
to
- tests/kernel/arch/amd64/t_ptrace_wait.c
and adapt appropriate files accordingly.
New directory will be used for more amd64-specific tests, verifying the
MD parts of the kernel.
Remove old entries from distrib/sets/lists as they were added a while ago.
Sponsored by <The NetBSD Foundation>
2016-12-02 05:54:14 +00:00
6d9a9bf113
Add basic tests for vlan(4)
2016-11-26 03:19:48 +00:00
7e075c29bc
update for xkeyboard-config 2.19
2016-11-22 19:51:37 +00:00
8ad774dbf7
Undo change to a comment made when I thought another change to the
...
script was needed ... the unnecessary script change was never committed,
but the comment that described it was... No functional change.
2016-11-19 01:14:58 +00:00
1675d6af19
The config file is not required to exist (unless specified via -d).
...
(reported by rhialto@falu.nl ) Don't fail to start if it doesn't.
Make sure the directory for the config file exists inside the chroot before
attempting to copy into it ("confdir" was calculated, but never used...)
While here, fix getopts usage (obviously only ever previously tested when
the -c arg was the first option...) and don't use test(1)'s -o operator
(especially not when one of the other args is an unknown string).
If -c is given (and we will chroot), require filename to be full path.
Misc minor style cleanups.
2016-11-18 23:10:05 +00:00
8fce8aab12
Add new test-suite t_dummy for libpthread_dbg
...
At the moment this test does nothing except reports failure from td_open()
for overloaded (implemented) dummy1_proc_lookup() (.proc_lookup from
td_proc_callbacks_t) of the following form:
static int
dummy1_proc_lookup(void *arg, const char *sym, caddr_t *addr)
{
return TD_ERR_ERR;
}
This file and directory with tests is placeholder for new ones, without
further need to alter mtree and distribution sets.
The libpthread_dbg interface and library is used by gdb(1) to handle
threads in applications.
Sponsored by <The NetBSD Foundation>
2016-11-16 21:36:22 +00:00
4bd7beee2d
An awk file is not a directory.
2016-11-15 22:31:07 +00:00
880c0915ea
Fix librefuse falout.... Hi pho
2016-11-15 12:59:33 +00:00
9ff8fe6273
Add new USB-enabled kernel config(s) based upon GENERIC for pmax, include it as kernel set in the build and make it a choice in sysinst.
...
OK simonb@
2016-11-04 19:18:50 +00:00
6b3de624e6
Handle variable expansion and comma/space separators in postconf.
...
From Timo Buhrmester:
https://mail-index.netbsd.org/tech-userlevel/2016/08/20/msg010301.html
2016-10-30 15:47:06 +00:00
897c08e2b7
Update root.cache to 2016102001 (October 20, 2016).
2016-10-27 15:20:32 +00:00
3e2e1df44f
mention that -a valid does not work, requested by felix.
2016-10-25 17:16:34 +00:00
6cddff1a99
Add tests for uniq(1) based on the example test cases provided in the POSIX man page.
...
Ok christos
2016-10-22 14:13:39 +00:00
b54ff8f604
Bless pmax with USB device files/majors and make kernel configs with USB and typical drivers work.
...
OK christos@ simonb@
2016-10-21 18:11:59 +00:00
90ff2f0a25
Adjust for new ifconfig address/mask output.
2016-10-19 21:27:10 +00:00
30db75397d
build new pt_PT.UTF-8 locale from libX11 1.6.4.
2016-10-04 23:52:02 +00:00
4a15838ffa
Fix to cannnot be opened a nvme(4) namespace device file.
2016-09-08 15:00:08 +00:00
30c261211c
fix incorrect nvme controller number.
2016-09-08 14:44:44 +00:00
5dae601e33
Add ub and elf32 to KERNEL_SUFFIXES
2016-09-05 07:23:43 +00:00
13445aedf0
Add very basic tests for tun devices
2016-09-05 02:26:48 +00:00
66840c3126
Update root.cache to 2016/8/25 version, l.root-servers.net has AAAA record
...
now.
2016-09-04 14:36:31 +00:00
c90b9921a5
unbound additions
2016-08-20 11:21:50 +00:00
870f1fd842
build and install libepoxy
2016-08-18 08:11:22 +00:00
64d64ddcb3
tests for sys/dev/clock_subr.c
2016-08-14 14:55:41 +00:00
e0fd82f4fc
PR port-ia64/51261
...
Stubs for ia64
2016-08-05 16:22:08 +00:00
6e4e96b573
Add the real directory as well as the debug directory.
2016-07-29 10:09:38 +00:00
9c91731aa4
Add destination directory for new dev/fss test
2016-07-29 09:52:46 +00:00
04e8d55d65
Always define MKNOD, even if we don't think we need it (turns out we do,
...
sometimes...) Noticed by Michael Plass reported on current-users.
2016-07-23 06:48:27 +00:00
a5229b934a
Cause rc to abort if mounting any of the critical local filesystems fails
...
rather than just ignoring the error.
Don't bother attempting to clear the contents of /var/run if /var/run
does not exist.
In that case the mkdir of /var/run/lvm would have failed - correct that
by using mkdir -p (which as a side effect will ensure /var/run exists
and is available for later scripts to use if for some reason it did not exist.)
2016-07-23 01:38:35 +00:00
93bca39382
As discussed at the biginning of last week (June 6 & 7, 2016) on
...
tech-kern in messages with a Subject starting [Re:] /dev/sdN -> /dev/sdN[cd]
and in PR port-amd64/51216 :
Create bare (no letter suffix) device names (block & raw) that
refer to the raw device ('c' or 'd' partition as appropriate).
This commit was delayed waiting to see if there was to be any more
discussion - there wasn't a lot.
Caution: this is going to consume 2 more inodes per disc device
configured, everywhere that devices are configured using MAKEDEV
2016-06-16 15:33:38 +00:00
0390a67c3a
Mark phone so we rebuild every time.
2016-06-09 04:26:07 +00:00
1fa5958a6b
Don't run .BEGIN if we are cleaning or making obj.
2016-06-09 04:07:46 +00:00
b3a11f7281
Avoid most of the .CURDIR hackery by letting make locate the files.
2016-06-09 03:44:01 +00:00
8ee72997ca
make sure the build dist files are build before we try to use them.
2016-06-09 00:19:31 +00:00
0fd293a610
don't give NetBSD.dist.tmp any inputs, as then it won't rebuild ever
...
unless they change, and we want to rebuild based upon what inputs are
present, not when they were last touched.
this fixes update builds that switch options that change the dirlist
like MKX11 or MKCOMPAT, restoring a portion of rev 1.14.
note that some opertions like turning off MKX11=yes will also require
a fresh DESTDIR, in addition to this fix. there may be more issues
remaining, but i am now able to enable MKX11=yes successfully without
any other change.
2016-06-08 22:12:42 +00:00
e7c0cc5d9a
Add NVMe command passthrough support.
2016-06-04 16:11:50 +00:00
ec48232126
Add initial support for Freescale i.MX7 SoC and
...
Atmark Techno Armadillo-IoT G3 boards.
Contributed by Internet Initiative Japan Inc.
2016-05-17 06:44:45 +00:00
5d3395496d
Adjust to new freetype structure.
2016-05-16 22:19:41 +00:00
796a3ac327
Avoid unnecessary use of basename(1). From Jukka Salmi a long, long time
...
ago on a tech-kern far, far away.
2016-04-23 21:24:31 +00:00
c73a69e593
Add a new test case for PPPoE using PAP
...
From s-yamaguchi@IIJ (with some tweaks by me)
2016-04-15 01:38:16 +00:00
5973801c0c
Add regression tests for some past gdb bugs.
2016-04-08 10:09:16 +00:00
8dc05bf9dd
Update root.cache to 2016/3/23 version, l.root-servers.net's AAAA record
...
has changed.
2016-04-03 08:01:34 +00:00
3d2fbcae7f
add /usr/include/gcc-5 directory to the distribution and adjust the
...
GCC 5 parts of the build (not yet enabled) to install/look there.
2016-03-12 23:07:05 +00:00
9da4c9a5be
tset was useful for fixed terminals and rarely changing configurations.
...
But for current software terminal emulators and varying network
logins it's just confusing.
No longer run tset when logging in.
ok @martin
2016-03-08 09:51:15 +00:00
d6c8225a0e
use kat, a version of cat that strips comments
2016-03-06 18:50:06 +00:00
709030f1f5
Introduce kat() a built-in version of cat(1) that strips shell-like comments.
2016-03-06 18:49:42 +00:00
be7deda7eb
Add tests for tap(4)
2016-03-04 02:44:45 +00:00
25e09ac3be
Record current raid configurations too in /etc/security.
2016-02-29 16:16:42 +00:00
ba87356165
Update build system for LLVM 3.8.0rc3.
2016-02-27 21:47:30 +00:00
c7ed7eb92f
Drop almost unnecessary devices for floppy to shrink sysinst.fs.
...
Briefly tested on TT030.
2016-01-29 18:03:16 +00:00
4145877bea
Create dtrace device as part of "all"
2016-01-28 19:06:39 +00:00
9f840dd1f7
Add /dev/full
2016-01-17 23:18:18 +00:00
dddc1afbdc
Move 10-wpa_supplicant, 15-timezone, 29-lookup-hostname and 50-ypbind
...
from /libexec/dhcpcd-hooks to /usr/share/examples/dhcpcd/hooks so they
are not run by default.
2016-01-07 22:07:18 +00:00
2357a4fb46
Use the new -P option to work out which pidfile dhcpcd will use.
2016-01-07 22:03:00 +00:00
d0367588d0
Instead of waiting for a duration based in IPv6 DAD count sysctl,
...
wait for 15 seconds for tentative flags to clear allowing 5 seconds
for detached flags to clear as well from configured addresses.
This is now protocol independant and allows time for the interfaces to
work out if they have a carrier or not.
2016-01-07 11:51:07 +00:00
2ba22c9356
Add some tests for the kernel HID parser.
2016-01-05 17:22:38 +00:00
3a26fec827
tests for libusbhid (many of which fail)
2016-01-01 21:38:53 +00:00
d86700ce1a
"ip6addrctl_enable" is now "ip6addrctl", set the default appropriately
2015-12-26 21:05:11 +00:00
dd01c08e97
remove some stuff we don't have; rename rc command variable.
2015-12-23 04:38:00 +00:00
7065e20960
give the kernel pax invocating the MKREPRO_TIMESTAMP treatment.
2015-12-20 02:35:34 +00:00
572dbd7b73
Freeze the BUILDER and the BUILD_DATE for repeatable builds
2015-12-19 23:37:43 +00:00
0572689e04
Remove JETSONTK1 and NYAN-BIG kernels, add a new unified kernel named TEGRA.
2015-12-13 23:02:56 +00:00
4f497f781b
Add defaults for ip6addrctl
2015-12-13 02:27:06 +00:00
ff0756d560
Add ip6addrctl
2015-12-13 02:05:15 +00:00
11ff782d8f
Add gpt tests
2015-12-04 17:19:33 +00:00
3eef035ce3
Update to 2015120100.
...
* Addresses of H.ROOT-SERVERS.NET has updated.
* Make IPv6 address lower case.
2015-12-03 10:41:22 +00:00
c5291a928e
Of course we can always not do something. Doesn't mean that we "can't"
...
(or "cannot"). In any case make the messages consistent and move the
period to inside the quotes.
2015-11-28 14:20:32 +00:00
52267b078d
clean up: remove FreeBSD cvs tags, update URLS, fix spelling
...
and add in PSMs defined in recent versions of specifications
2015-11-28 07:46:33 +00:00
0e5ab369bd
PR/49380: KAMADA Ken'ichi: ntpd_chrootdir does not work on NetBSD 7.0_BETA
...
Provide /etc/resolv.conf so that it can resolve names. This is needed because
of deferred name resolution.
XXX: pullup -7
2015-11-23 19:56:47 +00:00
b094e9b9cd
Add the filemon(4) device.
2015-11-21 12:11:56 +00:00
be39cd8f18
reapply 1.25 to fix upstream inconsistencies
2015-11-18 16:16:36 +00:00
fb472d3ca7
refresh
2015-11-14 16:25:48 +00:00
22439287a1
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.
2015-11-11 16:20:43 +00:00
christos