337eb43541
NOMODESENSE for all Seagate ST19171- not just FC
1998-12-05 20:52:47 +00:00
d610e1ad3f
Update BA for new max_lun parameter for SCSIbusses. Clearify maximum luns
...
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
1998-12-05 19:48:23 +00:00
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
4b8245a959
Add a max_lun property to match with the max_target property. Shorten
...
max_target to int16.
1998-12-05 19:41:31 +00:00
33fde1ad76
Eliminate the moreluns entry as it makes no sense for fat SCSI busses (e.g,
...
FC loops). Change the semantics of scsi_probedev so that it returns 1 if
you should continue probing at this target, else 0 for not.
Replace the blanket use of '7' with the use of the new sc_maxlun property
that is now gathered from HBAs. Allocate scsipi_link arrays based upon this.
Fix a really nasty and silly bug that has been there for a while where the
number of first level scsipi_link structures was one less than it needed
to be.
1998-12-05 19:39:23 +00:00
3f225e009d
Add Sigma Designs REALmagic Hollywood Plus MPEG-2 decoder
1998-12-05 19:02:14 +00:00
8f7f8d557d
made prototype for debug function wss_dump_regs match its definition.
1998-12-05 10:49:24 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
3a08ae9402
always use unsigned numbers for screen positions (for sanity - the libkern
...
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
1998-12-04 20:48:04 +00:00
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
c10f6edafc
AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner.
1998-12-04 11:17:54 +00:00
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
a68f1ef94c
Handle the case where the device does not support GET_PEPORT better.
1998-12-03 20:43:19 +00:00
bedb40a78c
Use umodem as the modem driver stub.
1998-12-03 19:58:09 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
1b04131eff
Try a bit harder to detect the physical failure of a component, and to
...
mark that component as dead. Physical failures are handled much better now.
1998-12-03 15:14:40 +00:00
3f3d8e85e6
If a configuration fails due to a non-existant spare, remember to release
...
any previously allocated components before bailing. Credit to Manuel Bouyer
for noticing this.
1998-12-03 15:06:25 +00:00
679de7e878
Fix (potential) referencing of null pointer in (verbose) debugging mode.
1998-12-03 14:58:24 +00:00
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
2228eaca8a
Add configuration and interface locators.
1998-12-02 22:57:08 +00:00
cf75925c7f
Even shorter printfs at attach.
1998-12-02 22:54:52 +00:00
4b4afb8252
Regen.
1998-12-02 22:51:50 +00:00
7270b91afe
Shorten some vendor names.
1998-12-02 22:49:51 +00:00
e424a174ba
Add stub for a modem driver.
1998-12-02 22:47:19 +00:00
fd3af06364
Avoid wrapping lines in attach printfs.
1998-12-02 17:20:20 +00:00
7d417ca964
Handle compound devices in usbd_get_report_descriptor().
1998-12-02 17:17:40 +00:00
c4dc0e3950
Regen.
1998-12-02 17:14:53 +00:00
65145fce2c
Fix typo.
1998-12-02 17:11:51 +00:00
41095ae62a
Add some new devices.
1998-12-02 17:02:59 +00:00
1d5d5ab40a
In struct wdc_xfer, change 'channel' to a pointer to a channel_softc, to avoid
...
a double-pointer dereference at run-time. Suggested by Matthias Drochner.
1998-12-02 15:53:34 +00:00
45675ab14b
- change drive_flags from u_int8_t to u_int16_t
...
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
a5d7ea15aa
Regen.
1998-12-02 09:43:15 +00:00
8692433023
add the compat id for the aha-1542cp
1998-12-02 09:42:57 +00:00
57ba10cfab
Change ofisa attachment comparable to change drochner made to isa
...
attachment. Works at least well enough to allow kernel to build &
boot on diskless shark with wdc controller in it.
1998-12-02 00:18:41 +00:00
75ed099b01
struct ataparam has endian dependence, so add big-endian case.
1998-12-01 13:06:37 +00:00
8ae89c20dc
Do untimeout() for the timeouts we set up.
...
(How can this ever have worked?)
1998-11-30 21:39:20 +00:00
aeec8f4cb2
regen
1998-11-30 19:47:53 +00:00
cef29c6e94
Per PR/6172 (Johnny Lam, lamj@stat.cmu.edu), fix pcidevs identification
...
of CL-PD6729. See <http://www.cirrus.com/products/overviews/pd6729.html >.
1998-11-30 19:47:16 +00:00
7c72f9361b
Change comment about isa_intr_establish() as discussed on tech-kern.
1998-11-30 12:57:10 +00:00
adbfb3777a
Update previous: we don't have the required information all the time.
1998-11-30 07:54:29 +00:00
0f8cfb66f0
Some more misc. cleanup in the same style as previous.
1998-11-30 07:44:24 +00:00
mjacob