- move per VP data into struct sadata_vp referenced from l->l_savp
* VP id
* lock on VP data
* LWP on VP
* recently blocked LWP on VP
* queue of LWPs woken which ran on this VP before sleep
* faultaddr
* LWP cache for upcalls
* upcall queue
- add current concurrency and requested concurrency variables
- make process exit run LWP on all VPs
- make signal delivery consider all VPs
- make timer events consider all VPs
- add sa_newsavp to allocate new sadata_vp structure
- add sa_increaseconcurrency to prepare new VP
- make sys_sa_setconcurrency request new VP or wakeup idle VP
- make sa_yield lower current concurrency
- set sa_cpu = VP id in upcalls
- maintain cached LWPs per VP
be updated. (This is needed to be compatible with how pre-SIGINFO signals
operated. If you siglongjmp out of a signal handler, the SS_ONSTACK state
needs to be cleared. This commit restores that functionality).
fit what it does.
The softsignal feature is used in Darwin to trace processes. When the
traced process gets a signal, this raises an exception. The debugger will
receive the exception message, use ptrace with PT_THUPDATE to pass the
signal to the child or discard it, and then it will send a reply to the
exception message, to resume the child.
With the hook at the beginnng of kpsignal2, we are in the context of the
signal sender, which can be the kill(1) command, for instance. We cannot
afford to sleep until the debugger tells us if the signal should be
delivered or not.
Therefore, the hook to generate the Mach exception must be in the traced
process context. That was we can sleep awaiting for the debugger opinion
about the signal, this is not a problem. The hook is hence located into
issignal, at the place where normally SIGCHILD is sent to the debugger,
whereas the traced process is stopped. If the hook returns 0, we bypass
thoses operations, the Mach exception mecanism will take care of notifying
the debugger (through a Mach exception), and stop the faulting thread.
so that a specific emulation has the oportunity to filter out some signals.
if sigfilter returns 0, then no signal is sent by kpsignal2().
There is another place where signals can be generated: trapsignal. Since this
function is already an emulation hook, no call to the sigfilter hook was
introduced in trapsignal.
This is needed to emulate the softsignal feature in COMPAT_DARWIN (signals
sent as Mach exception messages)
of the sibling list so that find_stopped_child can be optimised to avoid
traversing the entire sibling list - helps when a process has a lot of
children.
- Modify locking in pfind() and pgfind() to that the caller can rely on the
result being valid, allow caller to request that zombies be findable.
- Rename pfind() to p_find() to ensure we break binary compatibility.
- Remove svr4_pfind since p_find willnow do the job.
- Modify some of the SMP locking of the proc lists - signals are still stuffed.
Welcome to 1.6ZF
combined. Also prepare for adding VP repossession later.
- kern_sa.c: sa_yield/sa_switch: detect if there are pending unblocked
upcalls.
- kern_sa.c: sa_unblock_userret/sa_setwoken: queue LWPs about to invoke
an unblocked upcall on the sa_wokenq. put queued LWPs in a state where
they can be put in the cache. notify LWP on the VP about pending
upcalls.
- kern_sa.c: sa_upcall_userret: check sa_wokenq for pending upcalls,
generate unblocked upcalls with multiple event sas
- kern_sa.c: sa_vp_repossess/sa_vp_donate: g/c, restore original
sa_vp_repossess
General idea: only consider the LWP on the VP for signal delivery, all
other LWPs are either asleep or running from waking up until repossessing
the VP.
- in kern_sig.c:kpsignal2: handle all states the LWP on the VP can be in
- in kern_sig.c:proc_stop: only try to stop the LWP on the VP. All other
LWPs will suspend in sa_vp_repossess() until the VP-LWP donates the VP.
Restore original behaviour (before SA-specific hacks were added) for
non-SA processes.
- in kern_sig.c:proc_unstop: only return the LWP on the VP
- handle sa_yield as case 0 in sa_switch instead of clearing L_SA, add an
L_SA_YIELD flag
- replace sa_idle by L_SA_IDLE flag since it was either NULL or == sa_vp
Also don't output itimerfire overrun warning if the process is already
exiting.
Also g/c sa_woken because it's not used.
Also g/c some #if 0 code.
we pass via sigctx, so that it guaranteed that the memory wouldn't be
paged out at the time the signal arrives
potential problem pointed out by YAMAMOTO Takashi
set using a pointer, to save couple bytes in struct sigctx
also fix fallout from recent lwp_wakeup() change, where we failed to properly
detect if tsleep() returned as result of lwp_wakeup() or signal outside
our wait set; could have caused problems for threaded apps using sigwait(2)
et.al.
file system.
The function vfs_write_suspend stops all new write operations to a file
system, allows any file system modifying system calls already in progress
to complete, then sync's the file system to disk and returns. The
function vfs_write_resume allows the suspended write operations to
complete.
From FreeBSD with slight modifications.
Approved by: Frank van der Linden <fvdl@netbsd.org>
Right now the only flag is used to indicate if a ksiginfo_t is a
result of a trap. Add a predicate macro to test for this flag.
* Add initialization macros for ksiginfo_t's.
* Add accssor macro for ksi_trap. Expands to 0 if the ksiginfo_t was
not the result of a trap. This matches the sigcontext trapcode semantics.
* In kpsendsig(), use KSI_TRAP_P() to select the lwp that gets the signal.
Inspired by Matthias Drochner's fix to kpsendsig(), but correctly handles
the case of non-trap-generated signals that have a > 0 si_code.
This patch fixes a signal delivery problem with threaded programs noted by
Matthias Drochner on tech-kern.
As discussed on tech-kern. Reviewed and OK's by Christos.
- add simple lock for the list
- make get function remove the item from the list
- eliminate superfluous functions
thanks to enami and matt for the feedback.
the information there.
TODO:
1. since timer stuff gets called from an interrupt context, we could
preallocate ksiginfo_t's from the pool, so we don't need a kmem
pool.
2. probably the sa signal delivery syscall can be changed to take
a ksiginfo_t so we can use only one pool.
3. maybe when we add realtime signal support, add a resource limit
on the number of ksiginfo_t's a process can allocate.
The patch below (hopefully) improves some signaling problems
found by Nathan.
It also contains some cleanup of the sa_upcall_userret() function
removing any sleep calls using PCATCH.
Unblocked threads now only use an upcall stack after they
acquire the virtual CPU.
This prevents unblocked threads from stealing all available
upcall stacks.
Tested by Nick Hudson.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
