ba7706dd3c
Files to generate usable console RL02 packs on 8600.
1996-03-08 12:41:33 +00:00
3ac9ff6af4
Support for the RL02 disk at the PDP11 frontend console added.
1996-03-08 12:32:47 +00:00
6e51b1e47e
Support for VAX 8600/8650 added. Works with lots of Unibus adapters,
...
and will probably work with Massbus adapters as well. (Not tested,
but it's the same code as for 11/780). Ubareset's may cause crashes
on 8600 also like 11/780, but they are more uncommon. No support
for console RL02 yet, but it's likely to come.
1996-03-07 23:22:34 +00:00
3f09ddf89f
Fix of MicroVAX clock chip code, so that time sets right after reboot.
...
Fix done by Ken Wellsch.
1996-03-07 23:03:03 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
c2ce0848e2
Added ns_cksum.c.
1996-03-03 11:56:33 +00:00
c76bb64058
Machine-optimized version of ns_cksum.c.
1996-03-03 11:54:37 +00:00
c22fc0bce4
Enable label_t.
1996-03-03 11:21:31 +00:00
e82da18ec2
Fix include file ordering.
1996-03-03 11:18:59 +00:00
f2bcddae7f
Fix fuswintr/suswintr arguments to match prototype.
1996-03-03 11:17:59 +00:00
7ade5ebd76
Files needed to create boot floppies for 11/780, most of them
...
taken directly from 4.4BSD.
1996-03-02 17:57:34 +00:00
ffc8953cd7
Change config delay's to more reasonable values.
1996-03-02 14:29:23 +00:00
5d89814116
Changes due to 11/780 support. Raise splimp() to BR7.
1996-03-02 14:27:52 +00:00
cef093b42e
Add VAX780 support to the boot program.
1996-03-02 14:22:57 +00:00
8fbcb8ce5a
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding
...
file lines in files.vax.
1996-03-02 14:19:47 +00:00
10fe8f1971
All devices can now be in GENERIC.
1996-03-02 14:14:05 +00:00
827892239a
Add support for DW780. Note that ubareset's don't work properly.
...
This is not a problem on other Unibus adapters, but DW780's do
ubareset's more often. This needs to be fixed by someone someday.
1996-03-02 14:09:57 +00:00
89e32834cd
Fix some too long delays. Set some structs volatile that otherwise
...
caused hangs during autoconfig.
1996-03-02 14:06:03 +00:00
508f81daca
Support for VAX 11/780 - 11/785 system types added.
...
There are no support (yet) for the RX01 console floppy,
even if it is actually needed to create boot floppies.
(The arff utility is also missing, so...)
1996-03-02 13:45:34 +00:00
a14bb8a710
Add a #ifdef TUDEBUG around a printf statement.
1996-03-02 13:41:24 +00:00
c45af1134a
Unibus/Q22 bus device driver for DHU-11 serial card.
...
Written by Ken Wellsch. (kcwellsc@math.uwaterloo.ca )
1996-03-02 13:30:53 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
1376f92db9
Add routine to convert phys device number to kernel unit number.
...
Allow to set disklabel area writable.
1996-02-24 21:22:54 +00:00
f2aaea55c2
Make setroot() grok where we boot from even if it is hp disks.
1996-02-24 21:20:01 +00:00
df5a5e9485
Remove __FORK_BRAINDAMAGE, and the reason to why it was there.
1996-02-24 15:17:35 +00:00
2294cbd022
Fixed bug causing DMA to user stack from Massbus disks to give segfaults.
1996-02-23 17:54:33 +00:00
2aa22f8fbf
Allow rewriting of disk label after newfs.
1996-02-23 17:29:01 +00:00
aeaef139aa
Console TU58 device driver for 11/750 added.
...
It cannot write tapes yes, but reading works OK.
1996-02-17 18:48:53 +00:00
90b84d2da5
Add standalone driver for TU58 (DECtape II). Now initial installation
...
from TU58 on 11/750 is possible.
Change types on pte pointers, due to the change of pte's from
int to struct pte.
1996-02-17 18:23:18 +00:00
5025b0f9c9
Definition file for RSP (Radial Serial Protocol) used by DECtape II.
1996-02-17 18:14:50 +00:00
2395bee98d
Much faster copyin/copyout subroutines, written by Ken Wellsch.
...
Improved user-space network I/O (like ftp) with about 1.7 times!
1996-02-13 17:45:32 +00:00
27a9f5bd9c
Fix #include syntax.
1996-02-13 06:56:58 +00:00
183d234ae4
Add prototypes.
1996-02-11 13:47:55 +00:00
4cafd3d7d2
PAGE_SIZE should be PAGE_SHIFT. Really ugly bug!
1996-02-11 13:46:23 +00:00
26d151d2bb
Prototype for delay().
1996-02-11 13:45:37 +00:00
dfecf19e9f
Fix cpu_sysctl() arguments to be like prototype.
1996-02-11 13:43:37 +00:00
550f120337
Fix things that -O2 broke. Cleanup.
1996-02-11 13:41:35 +00:00
bb75a13fbb
Cleanup & convert to KNF.
1996-02-11 13:39:54 +00:00
998626f339
Add VAX650, mba, hp, ts. Change uba to be *'ed.
1996-02-11 13:28:25 +00:00
29719357a6
Remove csralloc(), not usable anymore.
...
Add ubasetvec() to steal interrupt vectors for device drivers that
need more than one vector. Add prototype for it.
1996-02-11 13:24:50 +00:00
d2dadd65df
register -> volatile in some places, to make it work OK with -O2.
1996-02-11 13:22:30 +00:00
435182d4bb
Device drivers for massbus adapters and massbus disks.
...
Works with RP04/05/06/07 disks.
1996-02-11 13:19:33 +00:00
d24ffd421f
Support for ka650, tailored in_cksum and removal of a couple needs-count.
1996-02-09 15:24:18 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
d5b078f3e6
Clean this up a little, and make it compile with `traditional' cpp.
1996-02-03 01:43:41 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
4f952cf1e7
#ifdef a call to kdb_trap() on DDB.
1996-02-02 23:19:43 +00:00
cfefb732a0
Fix type errors.
1996-02-02 22:57:43 +00:00
ragge