1e59d99d28
For all network drivers that call ether_ifattach(), and also
...
have _detach() functions:
Ensure that softc keeps state about whether the attach succeeded,
and make the detach function return immediately if the attach did
not complete.
2000-05-29 17:37:12 +00:00
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
1b83998bd7
Add bus_space_barrier.
...
Add DELAY in some busy loops to allow the dma engine to actually do something
(neccessary on fast processors).
2000-03-22 18:02:59 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
7a7a3bcfdf
handle attach failure in ne/pcmcia more carefully. (otherwise we'll
...
have trouble on detach)
2000-02-02 13:06:15 +00:00
f4e8883ccd
use a bit more standard (sys/device.h) prototype for {dp8390,ne2000}_detach().
2000-02-02 11:41:56 +00:00
17f5887294
implement if_detach code for ne/pcmcia.
...
XXX still incomplete, ne_pcmcia_detach() commented out for safery - please test
2000-02-02 10:00:06 +00:00
6eedee5c9d
Add entropy gathering.
1999-02-07 01:54:50 +00:00
1d0f24882d
Now that the *_activate() functions don't do things which are attachment
...
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
dd6750820c
Expose the "enable" and "disable" functions so that the front-ends can
...
access them.
1998-11-17 20:25:00 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
1713a9fb07
is790 u_char -> int.
1997-11-05 07:15:42 +00:00
18636a8934
Add ifmedia support via callbacks to the front-end.
1997-11-02 00:23:54 +00:00
b1ba3c5488
Pulldown from marc-pcmcia branch: minor tweaks to make this a completely
...
bus-independent driver, and garbage collect a few unnecessary things
from the softc.
1997-10-15 16:54:39 +00:00
66f8a19d70
back out previous change (committed in error)
1997-10-15 06:08:27 +00:00
1d74fdb6a3
minor formatting change
1997-10-15 05:48:56 +00:00
c0d7fd03ae
Remove the use16bit softc field, replacing the functionality with dcr_reg.
...
This allows the front end to override the default DCR (byte-wide DMA,
x86 byte order, 8-byte FIFO) with different transfer size, byte order, DMA
parameters, and FIFO threshhold. If the loopback select bit is not set for
normal operation, the default is used instead.
Inspired by thoughts from Bernd Ernesti.
1997-04-30 18:09:14 +00:00
ad24724cbc
Machine-independent driver for DP8390/WD83C690-based Ethernet controller.
...
Derived from the ISA if_ed driver and the mac68k if_ae driver.
1997-04-29 04:32:07 +00:00
jhawk