1892f84f2f
separate out the arch-specific and compat-specific subdirs.
...
put compat stuff in NetBSD.compat.$MACHINE_ARCH, and normal
stuff in NetBSD.dist.$MACHINE/MACHINE_ARCH, etc.
probably need at at more files for sh3, mips, ppc, sparc,
m68k, arm, ia64, etc., as every port has port- or arch-
specific header subdirectory.
2019-02-09 21:43:23 +00:00
a030aaf208
move ./usr/include/dev/iscsi into NetBSD.dist.iscsi that is only
...
included if MKISCSI != no.
2019-02-09 02:04:19 +00:00
cd2fa45002
create i386 specific include directories.
2019-02-09 00:15:28 +00:00
6b8fbde2b5
add missing ./usr/include/xen
2019-02-08 23:27:14 +00:00
0d5104591d
add final missing directory from /usr/include:
...
./usr/include/netmpls
2019-02-08 08:51:42 +00:00
d67c719a5f
add two more missing subdirs:
...
./usr/include/dev/pud
./usr/include/dev/putter
2019-02-08 08:22:09 +00:00
b5f0f6a619
add missing ./usr/include/dev/iscsi.
2019-02-08 06:08:20 +00:00
1e1783ce5a
add missing ./usr/include/dev/hdmicec
2019-02-05 06:11:29 +00:00
170093fa87
add missing ./usr/include/dev/hdaudio (base) and ./usr/include/dev/nvmm,
...
./usr/include/dev/nvmm/x86 (amd64).
(perhaps we should stop 'make includes' from creating the target directory
for normal builds as this leads to mtree inconsistencies.)
2019-02-04 04:45:48 +00:00
8f90c98b49
create include/dev/dm here instead of elsewhere, where it may fail
2019-02-04 03:26:53 +00:00
2d1f11de34
- add new entries of gcc=7 and libgomp, libasan, liblsan, libstdc++, libubsan
...
- add missing header files fpr gcc=7
- add some missing gcc=5 obsolete entries
- create ./usr/include/dev/bluetooth in mtree not make, and move it into the
base set where all other directories are.
2019-02-02 22:39:32 +00:00
65d06f3f0e
Remove the satlink driver. It was disabled everywhere, had no man page and
...
no use either. Spotted by thorpej in PR/21345, ok christos.
2019-01-27 08:53:28 +00:00
2922428b48
G/C VEXPRESS_A15
2019-01-20 10:50:06 +00:00
1521ad8a22
Another kernel bites te dust.
...
Remove ODROID-C1 as it is now replaced by GENERIC. Thanks jmcneill.
2019-01-20 10:18:03 +00:00
ea47ee7d4a
add basic gcc-7 support in sets lists and filesystem. mips gained
...
a header. assumes it's otherwise mostly the same as gcc-7.
2019-01-19 13:06:50 +00:00
08c8b11310
Setup default wpa_supplicant flags so that it:
...
* Writes diagnostics to syslog
* Enables interface matching to hotplug wireless interfaces
* Uses /etc/wpa_supplicant.conf
2019-01-12 17:38:36 +00:00
a4b9a5dd90
Install /etc/wpa_supplicant.conf
2019-01-12 17:25:09 +00:00
dd916c1e0e
Add a default wpa_supplicant.conf which allows wpa_cli(8) to configure
...
wpa_supplicant(8).
2019-01-12 16:51:54 +00:00
1761a60c58
sync with most recent (no changes)
2019-01-05 21:47:40 +00:00
d8993e22ce
regen
2019-01-03 17:30:06 +00:00
9cd3ccd06c
Revert installing llvm headers.
2019-01-01 18:46:03 +00:00
613a39df76
Install most of the llvm headers.
...
This is missing some generated files, llvm/include/IR/*.inc
2018-12-31 19:33:02 +00:00
1b44035b06
remove lwresd as now obsolete
2018-12-24 08:31:08 +00:00
1192b45e7e
Add /usr/tests/lib/libnvmm and related debug paths to the directory list.
2018-12-23 15:43:42 +00:00
9a1e316930
Add /dev/nvmm.
2018-12-23 12:18:30 +00:00
43c9320743
Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
...
but also as discussed several times in the past.
2018-12-19 13:57:44 +00:00
56c7646905
add tprof
2018-12-15 01:02:58 +00:00
ddba26defe
make iic* and more pci* nodes
2018-12-14 23:03:29 +00:00
5ed77d2b40
Add tprof
2018-11-27 14:55:56 +00:00
061a76feb8
install kernel for ppc601 floppies and iso
2018-11-12 20:07:47 +00:00
5b096803d3
Install the sample slip.login to share/examples/slip/slip.login
2018-11-09 21:33:50 +00:00
f3a4baf748
Add NVMM - for NetBSD Virtual Machine Monitor -, a kernel driver that
...
provides support for hardware-accelerated virtualization on NetBSD.
It is made of an MI frontend, to which MD backends can be plugged. One
MD backend is implemented, x86-SVM, for x86 AMD CPUs.
We install
/usr/include/dev/nvmm/nvmm.h
/usr/include/dev/nvmm/nvmm_ioctl.h
/usr/include/dev/nvmm/{arch}/nvmm_{arch}.h
And the kernel module. For now, the only architecture where we do that
is amd64 (arch=x86).
NVMM is not enabled by default in amd64-GENERIC, but is instead easily
modloadable.
Sent to tech-kern@ a month ago. Validated with kASan, and optimized
with tprof.
2018-11-07 07:43:07 +00:00
eeb96914b4
Match the right MACHINE_ARCHes for GENERIC.
2018-11-05 21:34:33 +00:00
ec787da840
Only add GENERIC to earmv6 and earmv7 builds
2018-11-04 21:41:12 +00:00
8f30df5465
Add tprof in MAKEDEV.tmpl, and regen MAKEDEV.8.
2018-11-04 12:48:01 +00:00
d71785d000
Add GENERIC to big-endian KERNEL_SETS
2018-11-01 18:23:25 +00:00
76478902d7
Use the GENERIC kernel where possible in armv7.img and remove the old
...
kernels from the bulid for SUNXI and TEGRA.
While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img
2018-11-01 11:05:24 +00:00
0050db9471
only flush routes in stop routine if flushroutes is true, same as
...
the start up.
2018-10-23 09:25:33 +00:00
c4336712ef
Sort
2018-10-21 07:08:40 +00:00
a52a4fdc24
Apply patch from Ian D. Leroux in PR bin/51019:
...
when unmounting tmpfs file systems at shutdown time, avoid unmounting
a tmpfs created by init on /dev - behaviour overridable from rc.conf.
By default all tmpfs that have device nodes are not mounted.
2018-10-19 14:11:12 +00:00
88efda171e
add intermediate directory.
2018-10-11 18:04:06 +00:00
c8bc6b1fb6
Add unbound /var/run directory (reported by hannken@)
2018-10-11 15:39:54 +00:00
51976c5c14
If fs_spec starts with the special string "ROOT.", replace it with a device
...
path derived from the value of the kern.root_device sysctl.
2018-10-06 13:09:53 +00:00
9aee78b66b
Create ld[4-7] device nodes, matching evbarm
2018-10-06 10:00:32 +00:00
d65b3b7a40
Fix an obvious botch in the previous rev, found by martin@
2018-10-04 11:50:34 +00:00
0b39a65f52
Redo xz vs. gzip selection via conditional make expressions, suggested
...
by joerg.
2018-10-01 09:47:34 +00:00
9060f499ba
Make more ld device nodes.
2018-09-30 16:01:08 +00:00
56d7a6f003
Discussed some years ago but never commited: add an option to have a
...
single tmpfs (on /tmp) and use that for /var/shm as well (via a symlink
created after the tmpfs on /tmp has been mounted)
2018-09-30 10:38:05 +00:00
15cb964115
Clarify comment, pointed out by maya: we do not expect bootloaders
...
to understand xz compression, so the kernel.gz stay as they are, only
the sets are moving to .tar.xz.
2018-09-29 06:10:01 +00:00
5d13792aee
Only test USE_XZ_SETS if it is defined. This is probably not the
...
correct fix, so someone else please do it correctly - either this is
the wrong word, or it should be given a default value elsewhere.
2018-09-29 01:12:22 +00:00
d7f296ff14
Prepare for .tar.xz sets
2018-09-28 15:11:36 +00:00
9ae2b31ff9
Convert uses of test (aka '[') to use only posix specified forms,
...
mostly just on general principle... this resulted in one or two minor
code reformattings to keep 80 char limits - a few needless uses of
quotes ("no" ??) were also removed (sh is not C. strings are strings
without quotes around them...)
2018-09-23 23:48:33 +00:00
ebc67df82a
Convert uses of test (ie: '[') to use only POSIX specified forms,
...
just on general principle (all but 3 of the changes are in code that
is commented out...)
2018-09-23 23:16:34 +00:00
d0784034e5
Convert to POSIX specified usage of test (even though it would probably
...
have never been an issue here, it is trivial..., and one of the two
uses that needed changing was (and still is) commented out anyway).
2018-09-23 23:12:21 +00:00
e063fa5f54
rc.subr can be used in install images (from sysinst) so must use only
...
POSIX specified test uses (no -a or -o). Also, use printf always,
rather than echo (replace echo as a function using echo with one which
uses printf).
2018-09-23 23:02:39 +00:00
ebec90347e
Remove ISDN from the kernel. It has remained unmaintained for a long time,
...
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.
This retires a big user of the mbuf API, and will ease maintenance of the
kernel.
2018-09-23 09:20:57 +00:00
6049b090a1
Remove the userland part of ISDN. The kernel part is untouched for now.
...
ipppctl was actually an exact copy of pppoectl; there is no functional
change in pppoectl in this commit.
2018-09-23 07:24:19 +00:00
ef012cc21d
Remove ISDN.
2018-09-23 06:39:23 +00:00
f8f3c1e1aa
Avoid use of test -o for when this is used as part of an INSTALL system
...
and the SMALL test does not support -o
2018-09-22 13:48:22 +00:00
ebe8cc5f44
add nta named directory.
2018-09-12 15:29:11 +00:00
6ba44db130
add /var/chroot/nsd/var/run
2018-09-07 16:50:22 +00:00
e0384f18e7
Remove netkey/.
2018-09-06 19:19:44 +00:00
ff954d5a99
remove netnatm leftover
2018-09-06 09:31:06 +00:00
d1e529d31c
Add ATF tests for printf(1)
...
Two new test programs, one for the version of printf in /bin/sh
and one for the command /usr/bin/printf (t_builtin and t_command)
Each test program has 28 test cases (the same in each) of which
currently 27 pass, and 1 is skipped.
See the test scripts themselves for more information.
2018-09-05 21:05:40 +00:00
d49d0a8c50
Copy bootaa64.efi to releasedir
2018-08-27 22:41:56 +00:00
f062baa468
handle v6 addresses
2018-08-13 09:16:06 +00:00
928317f5a5
Register micro-UBSan ATF tests in the distribution
...
Populate distrib files, mtree lists and add the entry in Makefile to
include the new code.
2018-08-03 04:24:41 +00:00
477e523c7d
Distribute GENERIC_KASLR on amd64.
2018-08-02 16:26:09 +00:00
e01538f90d
Create fw(4) & fwmem(4) device nodes by default so fwctl(8) works out of the
...
box.
2018-07-28 14:13:13 +00:00
eb279c7f26
Allow rc.conf to setup resolv.conf via resolvconf(8).
...
This allows all static network config to be in rc.conf rather than
spread across files.
2018-07-27 15:31:02 +00:00
14b1739a30
Retire the non-PAE-i386-PV configuration files. Keep only PAE-i386-PV.
...
Non-PAE has been dropped years ago by Xen.
The content of XEN3_* is merged into XEN3PAE_*, with "options PAE" set.
2018-07-26 16:22:49 +00:00
b6a911a673
Create /dev/ksyms as "440 $g_kmem". This prevents unprivileged users from
...
reading the kernel symbols. Discussed in January 2018 on tech-kern@,
reported by maya@, tested by tih@.
2018-07-21 07:46:56 +00:00
bdc22b2e01
Update LLVM/Clang build system to r337282.
2018-07-17 18:55:24 +00:00
786d63ab33
deal with g++ header files.
2018-07-17 00:50:56 +00:00
16afadc5f4
Drop output for MAKECONF MAKEOBJDIR MAKEOBJDIRPREFIX MAKEVERBOSE
...
in MKREPRO=yes builds.
2018-07-10 13:22:22 +00:00
beccf529a5
Remove debug hack (revert previous)
2018-07-09 08:24:33 +00:00
a1ed1388c0
Temporary hack to get MKREPRO debug info out of the build cluster. XXX revert!
2018-07-05 15:52:27 +00:00
b729dec75a
Remove dhclient from the base system.
...
Discussed here:
https://mail-index.netbsd.org/tech-userlevel/2018/06/21/msg011233.html
2018-06-29 12:34:13 +00:00
78e4f33125
Add if_vlan directory to lists to fix the build failure
...
build.sh was failed when using "-V MKDEBUG=yes"
2018-06-15 09:54:02 +00:00
66fd14939a
Prior to ZFSv15, volinit was an undocumented command which could be used to
...
populate /dev with zvol device nodes.
Following on with the recent ZFS/DTrace update, this is no longer a valid option
and causes the mountall script to barf zfs usage() following from
unrecognized command 'volinit' error.
2018-06-08 14:44:21 +00:00
aafff8763a
Revert previous: Don't generate XMSS host keys for sshd by default.
...
XMSS is a stateful post-quantum signature scheme.
- Post-quantum security for _online_ authentication is not important
until quantum computers become practical; there's no danger of
retroactive forgery in sessions that have already completed.
- As a stateful signature schemes, XMSS is qualitatively different
from all the other ones sshd supports, requiring additional
administrative care: roll back the state (e.g., from a disk backup
or VM snapshot), and you've shot yourself in the foot.
If users want XMSS keys, they can make them explicitly, but there's
no need for this to be enabled by default.
Discussed with christos offline.
2018-05-26 19:18:11 +00:00
c9b64841e5
Silence ssh-keygen output when host keys are generated. Instead, print only
...
key fingerprints. This replaces dozens of lines out ASCII art output with
something more reasonable:
armv7# service sshd start
ssh-keygen: 1024 SHA256:ynP4BQ2B0Fknnf9PfF4QoUDlYi0+7rNfYXTOYP2cDic root@armv7 (DSA)
ssh-keygen: 521 SHA256:Eoj382aaJNlSxuq/aYj3AXgxfMJAkyVPoCQd2BNjJiA root@armv7 (ECDSA)
ssh-keygen: 256 SHA256:+e9/qTbbN/g6xvkadtHsmIQ+Pc0afZRxbXJsk2HKIzY root@armv7 (ED25519)
ssh-keygen: 2048 SHA256:urNaF/m6oiCe5hXFZBxGLW2PvLz0ibtRFrqYw6R+qTw root@armv7 (RSA)
ssh-keygen: 256 SHA256:Su2Nal2W3vrFz8ukpcSXngl1/bu6xUm1nSvbxTHe9Js root@armv7 (XMSS)
Starting sshd.
2018-05-26 00:17:54 +00:00
2a24bb8653
Provide resize_disklabel=NO default. Used by arm images and is not
...
part of the stock rc.d yet. This silences rc when you delete the
whole resize_* block from rc.conf after the first boot.
2018-05-25 20:48:54 +00:00
266bca89c9
Add a 1PPS-over-GPIO driver, originally by Brad Spencer, with changes by
...
me to adapt to the new GPIO interrupt interface and support a wider variety
of GPIO pin configuations.
PR kern/51676
2018-05-20 14:08:32 +00:00
3117ca5607
Create bpf and openfirm devices
2018-04-28 12:45:03 +00:00
ac1539438e
Cosmetics: default to dmesg -t when writing /var/run/dmesg.boot -
...
the timestamps at boot time are mostly useless.
2018-04-18 04:27:47 +00:00
7e6759edb0
Hide ps error about processes not found (we could be more specific...)
...
It is superfluous, since we print:
foo not running? (check /var/run/foo/foo.pid).
2018-04-11 18:51:22 +00:00
1399b357f6
rename ledpanel to lcdpanel
2018-04-09 20:17:33 +00:00
f32c26c37c
rename panel to ledpanel
2018-04-09 19:06:34 +00:00
e5ff1cf5fd
Simplify so we don't have to hard-code the key filenames in two places.
2018-04-09 15:02:39 +00:00
733ab037c6
support xmss keys
2018-04-07 00:41:16 +00:00
7d5ae540ad
PR misc/53145 (Bruce Lilly)
...
Use ps -A instead of ps -ax (-A means -ax, but -A is posix, -x is not)
Use ps -o args instead of ps -o command (same reason).
This makes no difference when the ps used is /bin/ps on NetBSD, but
can make a difference when some other ps command gets invoked instead.
XXX pullup -8
2018-04-01 18:26:51 +00:00
fe33aa2786
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
...
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
2018-04-01 04:35:01 +00:00
84c9079f95
remove rstart, which hasn't been used since the xfree86 days.
2018-03-29 04:19:54 +00:00
a9b3a63e1f
Update the keys file to the latest version from:
...
https://ftp.isc.org/isc/bind9/keys/9.11/bind.keys.v9_11
This includes the new KSK2017 key which is planned to replace the KSK2010
in October 11th, 2018. It is important to have software that ships with
both before September 11th 2018. Anything that bootstraps after that could
have trouble switching.
XXX: pullup-8, pullup-7, pullup-6
2018-03-09 18:56:02 +00:00
4696d4d244
Instead of explicitly specifying a kernel name, ommit to allow the bootloader to iterate
...
through the list of kernel names it is configured to try. This way there is
fallback if /netbsd is not present. netbsd is the first name to be tried anyway.
Issue brought up on tech-kern@ by Patrick Welche <prlw1 AT cam ac uk> where a system
without /netbsd hung on boot.
Suggestion by rudolf <netbsd AT eq cz>
https://mail-index.netbsd.org/tech-kern/2018/02/16/msg023122.html
2018-03-02 00:25:26 +00:00
017fa37fab
/usr/X11R6 has been empty on most NetBSD installations since 2008,
...
and the last few straggling ports dumped it in 2015. It's time to
prune references to /usr/X11R6 from our config files.
2018-03-01 06:12:09 +00:00
097b3add5a
Actually install dhcpd6 rc script. Organize CONFIGFILES
...
alphabetically again while where.
PR 53018
2018-02-17 03:02:04 +00:00
af3c0cd56d
updates for GCC 6.4: add gcc-6 specific headers, combine some
...
all-gcc files, bump the shlib versions on new libs.
2018-02-03 21:27:45 +00:00
413e439cd5
Install GCC (gcc.old/) headers for Sanitizers
...
Install:
- allocator_interface.h
- asan_interface.h
- common_interface_defs.h
- tsan_interface_atomic.h
Into:
- /usr/include/gcc-5/sanitizer
Note headers in a comment headers for introduction in future:
- dfsan_interface.h
- lsan_interface.h
- msan_interface.h
Skip a file that will never be relevant on NetBSD:
- linux_syscall_hooks.h
PR 52265 by Kamil Rytarowski
Proposed and accepted on tech-toolchain@.
Sponsored by <The NetBSD Foundation>
2018-02-01 20:50:22 +00:00
ac34435581
Remove port-acorn26
...
OK core@
2018-01-24 09:04:40 +00:00
b8f54fc79b
add ipsec(4) interface ATF.
2018-01-10 11:06:06 +00:00
b985414b8f
Merge autofs support from: Tomohiro Kusumi
...
XXX: Does not work yet
2018-01-09 03:31:12 +00:00
a5c866b6cf
Import NVIDIA Tegra XUSB firmware for Tegra124 and Tegra210. Installation
...
of this firmware is controlled by the MKTEGRAFIRMWARE option, which
defaults to yes on evbarm and evbarm64 and no everywhere else.
2018-01-07 20:59:24 +00:00
2f6dbbcf88
Use sysctl to retrieve iostat names instead of parsing possibly
...
truncated iostat output.
Check dkctl listwedges output with grep.
Fixes PR 59205.
2018-01-06 23:44:06 +00:00
7909c778fe
Add NVMe devices.
2018-01-05 10:04:13 +00:00
d9123c9e75
Add startup file for dhcp v6 with builtin isc-dhcp. Alas, this needs to
...
be a seperate process. On the positive side: this can't break the dhcpd
for IPv4 when tested.
2017-12-29 18:15:48 +00:00
4d9106a6a2
Add missing RPI FDT build goop, from nick.
2017-12-11 11:38:14 +00:00
878cb1cfc5
Fix fallout from hid factorisation:
...
- need to install sys/dev/hid/hid.h for userland
- include it where needed - most of the time in place if usb/usbhid.h
2017-12-10 20:38:13 +00:00
f0053e9555
Update example PKG_PATH entry to use the CDN frontend, use uname -p instead
...
of uname -m for processor subdirectory, and derive the OS release from
uname -r.
2017-12-07 18:26:51 +00:00
2dbf225c9a
make a few more drm nodes
2017-12-05 19:17:11 +00:00
6b923cca7a
Do away with (not well specified, even if it happens to work) absurd
...
15 arg test ([ ]) expression, and replace it with several well defined
2 arg tests, combined with (also well defined) sh syntax.
2017-12-04 14:50:33 +00:00
db2dcdb34a
Unhook BPI, CUBIEBOARD, and CUBIETRUCK kernels from the build (use SUNXI kernel now)
2017-11-30 19:54:50 +00:00
fb651b612c
Add driver for QEMU Firmware Configuration device.
...
This interface allows the host to pass various data items and files to
the guest OS.
2017-11-25 16:31:03 +00:00
dfcdd5e31d
create more /dev/pci* nodes, for PCIe systems
2017-11-15 04:31:48 +00:00
16d924d2d3
Add net/ipsec debug lib directory
2017-11-01 08:32:07 +00:00
6f3643049e
/tmp/t
2017-10-25 07:41:35 +00:00
e30b21a362
Update contact info for changes to this file.
2017-10-21 19:43:53 +00:00
48bbd83f93
Create directory for new bwfm firmware to be installed into.
2017-10-21 05:30:48 +00:00
0759fcfcfc
With the new version of OpenSSH, SSHv1 is no longer supported server-side.
...
Along with that rsa1 type keys are no longer supported.
Don't try to generate such keys on new systems.
ok christos
2017-10-07 21:41:51 +00:00
794f77b51f
update for xkeyboard-config 2.21.
...
prepare for libdrm data files.
2017-08-29 07:53:54 +00:00
eb0a13ec2a
veriexec is enabled by default in most kernel configs but the lack of device
...
node results in a non working config, despite following manual to get setup.
Remove a step for the user by creating a device node for veriexec by default.
ok mrg jakllsch
2017-08-28 01:34:52 +00:00
a9560cc50f
Creating installation/ramdisk here does not work; it happens too late.
2017-08-20 15:35:31 +00:00
c62a157eb2
merge the rest of sbmips into evbmips. install the stand files in
...
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet. also build the SBMIPS kernels.
unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.
XXX: releng can turn off sbmips* builds now for -current.
2017-08-15 10:11:31 +00:00
3d97e8977a
Update Raspberry Pi 3 example to use dplcom0 instead of dty00
2017-08-12 11:45:20 +00:00
40fab7550d
add dial-out device node for plcom
2017-08-12 11:41:21 +00:00
96c1990c4a
Add an example for configuring the Raspberry Pi 3's bluetooth chip.
2017-08-11 11:57:05 +00:00
136f040412
Fix up bcm43xx bluetooth firmware addition. Including mtree directory
...
addition, and using the correct spelling of the license file name.
2017-08-10 19:42:53 +00:00
7c192b2a5e
Update LLVM build glue for 5.0RC1.
2017-08-01 20:07:37 +00:00
b30d96bb63
turn on "console" which can be either the serial console or the glass tty
...
instead of ttyE0, to facilitate anita tests. From uanand.
2017-07-13 16:03:36 +00:00
1541a8a5a7
Remove the stopping and starting of various network scripts on
...
sleep / resume.
This should no longer be needed now the various applications
(dhcpcd, ntpd, wpa_supplicant et all) are more aware to the network state
as all interface carriers should be brought down and up again.
Fixes PR misc/52397.
2017-07-13 13:50:48 +00:00
cd10bcc71c
Revert the previous changes for PR/52377.
...
- the names "ttya" and "ttyb" in zs(4) man page were leftover of the orignal
sparc/sun3 ports which used the same name for their native SunOS users
- symlinks ttya -> tty00 -> ttyZ0 (by "lndev tty00 ttya") are awful anyway
(symlinks tty0? -> ttyZ? are handled in MI MAKEDEV.tmpl)
See details on discussion on source-changes-d@:
http://mail-index.netbsd.org/source-changes-d/2017/07/thread1.html#009301
2017-07-09 05:58:13 +00:00
07d0fae850
PR/52377: Miod Vallat: Provide links to ttya and ttyb as mentioned in zs(4)
2017-07-07 23:48:34 +00:00
810e1e7da1
Revert previous - not a typo, even though it looks like one
2017-07-06 09:49:39 +00:00
b1a3593132
PR misc/52370
...
Correct typo.
XXX pullup 8, pullup 7
2017-07-06 09:24:47 +00:00
9a9d8df30e
Enable memory disk support in the TEGRA kernel and remove TEGRA_INSTALL.
2017-07-06 00:35:28 +00:00
fab9db5f7e
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
...
files for SUNXI and TEGRA kernels on the MSDOS partition.
2017-07-06 00:17:04 +00:00
3fa2721f9e
Copy install ramdisk to releasedir. Provide both a raw ffs and
...
Legacy U-Boot version of it.
2017-07-05 19:50:49 +00:00
20c8c3ce7c
Remove SUNXI_INSTALL kernel
2017-07-05 17:19:52 +00:00
c2cb05f51f
Replace HUMMINGBIRD_A31 with the SUNXI kernel.
2017-07-02 22:39:44 +00:00
985c7e15a0
Add GENERIC_USB to vax kernel sets, but not to sysinst (yet), as bootloader
...
cannot handle kernels that large (yet).
2017-06-26 17:45:56 +00:00
e24e146e21
USB for vax (similar to pmax; no/negligible impact on legacy):
...
* Add USB device files/majors.
* Make kernel configs with USB work.
* Provide a USB-enabled kernel config.
2017-06-22 17:51:22 +00:00
4f1895c5fb
Don't try and build VEXPRESS_A15_INSTALL
2017-06-20 21:04:23 +00:00
7a1cb2ebf8
Add audio for vsaudio(4) and speaker to be on par with other archs.
2017-06-20 15:10:03 +00:00
87bc6586d8
Replace ALLWINNER_A80 (it's never really worked) with VEXPRESS_A15.
...
Idea from jmcneill@
2017-06-20 10:55:03 +00:00
b17b183100
use -v to get the expanded variable.
2017-06-19 20:10:18 +00:00
9511d79c1a
Install racoon pam file.
2017-06-18 20:23:21 +00:00
365765ad32
no need for debug printing.
2017-06-18 02:43:43 +00:00
fef4b4b661
put the dtb files with their kernels.
2017-06-18 01:03:30 +00:00
2051d84574
G/C libpthread_dbg from mtree
...
Remove entries:
- ./usr/libdata/debug/usr/tests/lib/libpthread_dbg
- ./usr/tests/lib/libpthread_dbg
Noted by <Herbert J. Skuhra> via private mail.
2017-06-15 15:20:13 +00:00
mrg