mrg
cb6e315ab0
make this work again.
1999-10-11 16:08:47 +00:00
nisimura
7fbac8b3cc
- Remove defunct codes and arrange consistency between pmax and alpha.
...
- Reduce 'ioasic_base' expose.
1999-10-01 09:19:42 +00:00
nisimura
de20527da0
Forgot to commit an important change for bus_space/bus_dma.
1999-09-28 08:05:42 +00:00
simonb
60f2775a8e
Fix incorrect comment.
1999-09-28 02:26:35 +00:00
ad
2d7488c2c5
Use px_probe_sram() to figure out ringbuffer size instead of defaulting to
...
the minimum value of 128KB (useful only for PMAG-F).
1999-09-25 14:45:21 +00:00
nisimura
ff559f77f0
'KB' for kilo-bytes as humanize_number().
1999-09-24 00:37:52 +00:00
matt
4d95a06139
Need to pull in <sys/kernel.h> for definition of cold.
1999-09-21 00:10:39 +00:00
thorpej
dfdb204ae2
Declare and clear `cold' in a centralized place.
1999-09-20 18:29:21 +00:00
ad
e6f3bfaa3a
N10's host interrupt register uses low nybble for interrupt cause, not the
...
entire word.
1999-09-18 01:50:24 +00:00
thorpej
11cae42531
Centralize the declaration and clearing of `cold'.
1999-09-17 19:59:35 +00:00
thorpej
3b01d1b872
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-15 18:10:33 +00:00
chs
f3a668ed84
eliminate the PMAP_NEW option by making it required for all ports.
...
ports which previously had no support for PMAP_NEW now implement
the pmap_k* interfaces as wrappers around the non-k versions.
1999-09-12 01:16:55 +00:00
nisimura
f563627c41
Remove now defunct local implementation of ioasic_lance_dma_setup().
1999-09-09 06:41:08 +00:00
nisimura
633408472b
Use bus_dmamap_load() to obtain 128KB chunk for LANCE merging codes from
...
NetBSD/alpha. Tested ok with DEC3000 and DECstation.
1999-09-09 06:33:38 +00:00
simonb
a68944cfca
Overhaul the tz SCSI tape driver:
...
+ Add a quirk table.
+ Assume all else is a modern drive that can do variable block
lengths (this is the main reason for this work - the old driver
only ever seemed to write 512 byte blocks!).
+ Keep track of values for mtget's mt_fileno, mt_blkno.
+ Handle a few extra MTIOCTOP commands.
Ideas gleaned from our MI scsi tape driver and the FreeBSD CAM tape
driver. Tested on a TKZ09 (DEC badged Exabyte 8500), a TLZ06 (DEC
DAT) and TK50.
Many thanks to Pierre Bergdolt for helping with testing.
1999-09-07 13:53:36 +00:00
simonb
a17eb29d7c
Remove a few unnecessary header files.
1999-09-05 11:34:29 +00:00
simonb
eca6f8a067
Fix tyop.
1999-09-05 06:31:52 +00:00
nisimura
d0259231aa
A small fix to save such a configuration of MAXINE with TC framebuffer
...
option card installed.
1999-09-03 10:19:40 +00:00
nisimura
c1122ccf3d
- Nuke '#ifdef alpha' which brings little useful, plus a small cleanup.
1999-09-03 07:12:45 +00:00
nisimura
37b9802f3a
- Nuke "asc.h" inclusion.
1999-09-03 06:12:28 +00:00
simonb
0676f7a9b7
Handle the MTOFFL request to actually offline a tape rather than just
...
rewinding it. Tested with an Exabyte 8500 on a 5900/260 (the asc scsi
driver).
1999-08-31 01:12:51 +00:00
mycroft
c3e1f6741d
A foolish consistency.
1999-08-30 18:58:01 +00:00
mrg
f75cf1688b
install ieee.h
1999-08-30 00:51:57 +00:00
mycroft
4ef547e76d
Add ieee.h.
1999-08-29 18:21:20 +00:00
thorpej
8c92a5344c
PMAX uses white-on-black for the default rcons colors.
1999-08-26 20:49:40 +00:00
simonb
d65a712698
Fix some small tyops.
1999-08-25 02:12:05 +00:00
simonb
c8276b07d3
Remove ifdef'd alpha call to set_clockintr() - the pmax and alpha clock.c
...
have diverged, and set_clockintr() doesn't exist on the alpha anymore!
1999-08-25 00:44:36 +00:00
ad
c9adbf13c2
Update to match new rasops_init semantics.
1999-08-24 11:16:03 +00:00
thorpej
2cf3330a1b
Garbage-collect reference to <sys/dmap.h>.
1999-08-23 22:29:37 +00:00
simonb
17f87d3816
Print out the module number that causes the ECC error.
1999-08-16 13:13:00 +00:00
simonb
1eda4ea610
Remove bogus CSR #defines and replace with known ones.
1999-08-16 13:12:41 +00:00
simonb
7e9978db4e
Neaten up #defines for the CSR.
...
XXX: Still not sure if some of these are right.
1999-08-16 13:12:17 +00:00
simonb
259ba92fef
Pass (csr & KN0x_CSR_BNK32M) to dec_mtasic_err() so that it knows what
...
size individual memory modules are.
1999-08-16 13:11:45 +00:00
simonb
120f2d5c70
Remove board-specific CSR definitions.
1999-08-16 13:10:52 +00:00
simonb
4be158521b
Put original contents of the TURBOchannel bus-cycle counter clkread()
...
from an old version of machdep.c into kn03_clkread(). Fixes problems
with wild CPU time usage noted on port-pmax.
1999-08-13 06:21:39 +00:00
thorpej
eb20bbc780
Change the semantics of splsoftclock() to be like other spl*() functions,
...
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
1999-08-05 18:08:08 +00:00
ad
233d3887c1
In pm_screen(), return 0 if fballoc() fails, not 1.
1999-08-02 12:52:27 +00:00
mrg
39a5b02150
if there are no FB devices, tc_consprobeslot() fails always.
1999-08-02 12:01:46 +00:00
augustss
a7cd454b1d
It's time to be COMPAT_14.
1999-07-29 10:37:12 +00:00
ad
3d71693ea7
In fbconnect(), append ' (console)' to printed message if called for
...
the console framebuffer at attach time.
1999-07-28 17:13:54 +00:00
cgd
f886376518
be more efficient when doing the SYSTEM_LD_TAIL for -g kernels: don't
...
copy them just to strip them, use strip -o.
1999-07-26 05:20:44 +00:00
ad
724365fa3e
Change the way fb devices are configured and attached:
...
- 'struct fbsoftc' created, which points to a 'struct fbinfo'
- 'struct fbinfo' for each device is allocated with fballoc()
This means:
- Console device doesn't get different 'struct fbinfo' at attach
- Console device doesn't get initialized twice
- Color rcons now works
- The current Xserver MUST BE REBUILT.
1999-07-25 22:50:28 +00:00
mrg
f484530816
do not "quote" SAMISCMAKEFLAGS values, it causes pain and suffering.
1999-07-21 13:34:34 +00:00
christos
41cc9a0eb8
enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
...
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!
1999-07-20 07:40:34 +00:00
simonb
988906cf52
Put tc_machdep.h back - the X server needs it to build.
1999-07-19 23:35:29 +00:00
ad
fe6a4d8ffd
Remove 'already the console' check, which will be handled by fballoc(),
...
fbattach() and fbconnect() shortly.
1999-07-16 14:23:47 +00:00
thorpej
0945bf58b0
Add examples for including the kernel crypto bits from either crypto-us
...
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.
1999-07-09 18:55:33 +00:00
mrg
ecdad0ec33
clean up a bit after jason :)
...
- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.
this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)
1999-07-09 09:52:55 +00:00
thorpej
3ebbe095e0
Change the pmap_extract() interface to:
...
boolean_t pmap_extract(pmap_t, vaddr_t, paddr_t *);
This makes it possible for the pmap to map physical address 0.
1999-07-08 18:05:21 +00:00
thorpej
c4d8d19db9
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 00:05:28 +00:00