- Add a macro to compute the max frame length based on Ethertype
and presence of FCS, and use it to validate the packet size
in ether_input().
- Add capabilites to struct ethercom, and allow hardware drivers
to specify that they can handle the larger hardware MTU that
VLANs require in order to strictly conform to 802.1Q.
- Make ether_ifdetach() clear out the link address and free all of
the Ethernet multicast structures.
Also, rearrange the VLAN driver itself in preparation to supporting
other hardware types, including FDDI (which has 802.1Q VLAN capability).
supposed to bubble carry through.
- Disable the double-loop version of ether_crc32_le() and add a
table-driven version of ether_crc32_le() -- the table-driven
version is faster.
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
attached.
- Add ether_crc32_be() and ether_crc_le(), common functions for computing
the Ethernet CRC on arbitrary length buffers. Nothing uses them yet,
and these should be double-checked and probably re-implemented as
table-driven functions.
although this version has been changed somewhat:
- reference counting on ifaddrs isn't as complete as Bill's original
work was. This is hard to get right, and we should attack one
protocol at a time.
- This doesn't do reference counting or dynamic allocation of ifnets yet.
- This version introduces a new PRU -- PRU_PURGEADDR, which is used to
purge an ifaddr from a protocol. The old method Bill used didn't work
on all protocols, and it only worked on some because it was Very Lucky.
This mostly works ... i.e. works for my USB Ethernet, except for a dangling
ifaddr reference left by the IPv6 code; have not yet tracked this down.
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
This situation happens on severe memory shortage. We may need more
improvements here and there.
- Grab IEEE802 address from IFT_ETHER card, even if the card is
inserted after bootup time. Is there any other card that can be
inserted afterwards? pcmcia fddi card? :-P
- RFC2373 u bit handling suggests that we SHOULD NOT copy interface id from
ethernet card to pseudo interface, when ethernet card has IEEE802/EUI64
with u bit != 0 (this means that IEEE802/EUI64 is not universally unique).
Do not use such address as, for example, interface id for gif interface.
(I have such an ethernet card myself)
This may change interface id for your gif interface. be careful upgrading
rc files.
(sync with recent KAME)
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
use the Ethernet source address speficied in the sockaddr rather than
the interface's Ethernet address, and then fall through to the AF_UNSPEC
case. From Greg Smith <greg@nas.nasa.gov>.
if_fddisubr.c to fastpath IP forwarding. If ip_forward successfully
forwards a packet, it will create a cache (ipflow) entry. ether_input
and fddi_input will first call ipflow_fastforward with the received
packet and if the packet passes enough tests, it will be forwarded (the
ttl is decremented and the cksum is adjusted incrementally).
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
thorpej