source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.
This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.
is to provide routines that do as KASSERT(9) says: append a message
to the panic format string when the assertion triggers, with optional
arguments.
Fix call sites to reflect the new definition.
Discussed on tech-kern@. See
http://mail-index.netbsd.org/tech-kern/2011/09/07/msg011427.html
http://mail-index.netbsd.org/tech-userlevel/2011/08/25/msg005404.html
This is used by disk tools such as disklabel(8) to dynamically decide is
the undelyling platform uses a disklabel-in-mbr-partition or not
(instead of using a compile-time list of ports).
getlabelusesmbr() reads the sysctl kern.labelusesmbr, takes its value from the
machdep #define LABELUSESMBR.
For evbmips, make LABELUSESMBR 1 if the platform uses pmon
as bootloader, and 0 (the previous value) otherwise.
Add a flag argument which cause the waychdog to not be attached.
Use it to disable the watchdog on loongson-based platforms, where
the CS5536's reset output is not wired to the CPU reset line :(
1) because the CS5536 is not associated with a x86 CPU, interrupts are not
ack'ed as it expects so interrupts cannot configured as edge-triggered
(as is expected for a PCIIDE in compat mode)
2) the PATA->SATA bridge ignores the WDC_IDS (interrupt disable bit) so
the PATA IRQ line gets asserted when resetting or running some polled
commands. It also wrongly asserts IRQ when the (nonexistent) slave
device is selected
2) wouldn't be an issue with edge-triggered interrupt because we would
get a spurious interrupt and continue operation, a new interrupt only shows
up when the PATA IRQ line goes low and high again. But because of 1),
we get an unclearable interrupt instead, and the system loops on the
interrupt handler.
To workaround this, introduce a WDC_NO_IDS compile option which runs
all polled commands (including reset) at splbio() and without sleeps,
so that the controller's interrupt is effectively disabled and
won't be reenabled before the interrupt can be cleared.
The conditions triggering this problem are speficic enough to handle
this via a compile-time option; no need for a run-time (e.g. a
config(9), device property or callback to disable interrupts) solution.
and the existing evbmips/gdium support.
This has been tested on a lemote fuloong device (boots multiuser),
should also support other lemote devices (maybe with minor adjustments,
or adding missing drivers). There is some gdium support here too, but it
may not be yet complete (someone with a gdium would need to have a look,
hi macallan@ :)
loongson kernels are 64bits only: the loongson2f has ressources located
above the 2Gb physical address, and it's much easier to access it
using XKPHYS than trying to make it fit in the limited 32bit kernel
virtual space.
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.
<http://mail-index.netbsd.org/tech-kern/2010/04/02/msg007941.html>,
divide each machine's bus.h into bus_defs.h (constants & data types)
and bus_funcs.h (macro implementations of bus_space(9) routines and MD
prototypes).
Note that some bus_space(9) routines' implementation will move to .c
files from inline subroutines or macros in .h files.
I've only made the split for machine architectures where there is PCI.
All of the non-PCI-having architectures will require a similar split.
These #include files are not referenced by any (committed) Makefiles or
header files, yet. Changes to Makefiles, to <sys/bus.h>, and to some
more machine-dependent files will dribble in before I throw the switch.
pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.
For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:
Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.
siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.
slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.
viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.
While I'm here, make pci_mapreg_submap() static.
With these changes in place, I have tested the compilation of these
kernels:
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC
As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:
### evbmips-el GDIUM
nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop
### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'
### ia64 GENERIC
/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type
### sgimips GENERIC32_IP3x
crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.
See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.
copyright. Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.
Extra verification by snj@.
- better named one
- not suffering from buffer oveflow
- simpler
- handling different separators
- returning error codes for errors
Some ideas from one posted on tech-net by Jonathan A. Kollasch
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)
i built about 20 of these kernels to check, but not all of them.
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
- mach_init: use mips_init_lwp0_uarea(), do not hardcode it. Do not call
ksyms_init(), it's called in MI. Also, avoid struct user in few places.
- findroot: use deviter interface.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.
This allows use of subr_disk_mbr on all archs. Default to it for
the rump disk component. No functional change for regular kernels.
(The other option would've been to include dkbad in disklabels
everywhere, but arguably this approach has less possible side-effects,
especially given that wedges and related magic will take over the
world any second now).
