Commit Graph

318 Commits

Author SHA1 Message Date
ad 2fdfbee8ac -GENERIC_DIAGNOSTIC 2007-12-02 23:55:52 +00:00
joerg 611565d05b Remove GENERIC_LAPTOP and INSTALL_LAPTOP. To compensate, switch
bootfloppy-big to actually use INSTALL_LARGE (with ACPI) and 5 floppies.
2007-11-15 00:31:19 +00:00
pavel 8a0862e62b Add a comment reminding to update the release notes if the list of
kernels change.
2007-07-24 10:28:05 +00:00
hubertf ae218465f7 Add GENERIC.NOACPI kernel that offers - surprise! - no ACPI
(in contrast to GENERIC).
2007-05-17 01:50:48 +00:00
martti 94f749229e Create /dev/bio 2007-05-16 13:06:03 +00:00
bouyer ff6bcd05a5 For the benefit of modern hardware, enable ACPI by default in INSTALL and
GENERIC kernels. If ACPI is an issue on your hardware, 'boot -c' and
'disable acpi' should be a workaround. ACPI-enabled kernels works fine
on pre-acpi hardware.
for amd64:
- add ACPI to INSTALL and GENERIC, remove the *_ACPI config files.
- get rid of the bootfloppy-big.fs boot image, and got to a 3-floppy boot
  image
for i386:
- introduce INSTALL_LARGE which has ACPI and some devices with big firmware
- move some devices from INSTALL to INSTALL_LARGE
- Boot floppies still use INSTALL, and bootfloppy-big.fs is still there
  (for thoses who want to build el-torito floppy emulation boot CD) and use
  INSTALL.
For both, drop the 'iso-image' code in etc/ to make the iso bootable, we'll
use something else to build bootable CDs.
2007-03-06 21:47:45 +00:00
he 5f00d6d5a0 Install pxeboot_ia32.bin as part of a "make release" on i386 and amd64. 2007-02-27 18:17:28 +00:00
tron da3cb8f550 Increase the number of raid(4) device node sets to four and the number
of wd(4) device node sets to eight. This fixes another problem
reported in PR port-amd64/35532
2007-02-09 21:17:11 +00:00
dyoung df51b53ccc Create /dev/cmos. 2007-02-06 21:27:43 +00:00
hubertf 6a5bb11672 Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@
2007-01-15 23:35:11 +00:00
ad 7334cf17bb Enable /dev/io for COMPAT_FREEBSD. 2006-12-29 19:16:30 +00:00
dsl bc1f6e73ad Stop building the INSTALL_SMALL, INSTALL_TINY, INSTALL_PS2, GENERIC_TINY and
GENERIC_PS2TINY kernels.
These kernels are for i386 (and small i486) systems that have almost all
long since met their makers.
Add ALL (to help avoid bitrot).
2006-11-19 11:21:19 +00:00
dsl 7e3bc3c991 Put the kernels one per line for easier commenting out 2006-11-18 21:04:40 +00:00
tron 4241fec1bf Bluetooth fixes by Iain Hibbert:
Change the way in which bluetooth devices attach to system. The
new way is for devices to attach directly to a btdevN device via
its own control file /dev/btdevN.
- bthub(4) is replaced by btdev(4).
- /dev/bthubctl is replaced by /dev/btdevN.
- configuration now uses proplib(3) property lists.
- btcontrol(8) updated to use new API, and now uses private
- XML config file /var/db/btdev.xml.
2006-07-26 10:30:59 +00:00
bouyer d252c65e9c Add a /dev/amr* control file for amr(4) devices, which allows sending raw
commands to the controller.
Add a amrctl(8) control tool, which for now only allows to get status
from the adapter (status of adapter, logical volumes and and individual
drives).
From FreeBSD, with some adjustements by Andrew Doran and me.
2006-07-23 12:01:25 +00:00
bouyer 75e3593f2c Add new xen device xsd_kva (for Xen3 dom0 operations) 2006-07-04 21:39:55 +00:00
bouyer 2707ad28d9 Add a kernel config file for Xen3 Dom0, built as part or i386 release. 2006-07-02 21:28:39 +00:00
gdamore a5c89047c0 Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.)  This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 15:44:33 +00:00
hubertf b6eda27950 Rename XEN kernel config files to be more consistent:
INSTALL_XEN3_U        -> INSTALL_XEN3_DOMU
  INSTALL_XENU          -> INSTALL_XEN2_DOMU
  XEN0                  -> XEN2_DOM0
  XEN3_U                -> XEN3_DOMU
  XENU                  -> XEN2_DOMU

OK'd by bouyer@
2006-06-08 22:17:07 +00:00
hubertf f3513c1e13 Add & enable boot-CDs (with ramdisk kernels only, no install sets),
built as part of a regular release. For more information, see
http://mail-index.netbsd.org/tech-install/2006/05/11/0001.html

OK: core@
2006-06-02 22:35:21 +00:00
bouyer 2c84df432e Build XEN3_U and INSTALL_XEN3_U kernels as part of release process. 2006-03-20 22:36:37 +00:00
bouyer 4b058b80fb Add xencons to the default list of devices. Fix port-xen/29887 by Juan RP. 2005-04-06 21:06:28 +00:00
xtraeme d34097e695 Create the xbd1* devices as well as xbd0*, this is useful to install
domUs via CDROM or unmounted FS in the sysinst menu.
2005-03-15 23:46:09 +00:00
bouyer 3e8f0992c8 Integrate Xen to the i386 build process:
- Add xen devices to MAKEDEV
- Add Xen kernels to list of kernel to build
- Add INSTALL_XENU to the install kernels
- introduce the xbd disk devices to sysinst.

This will add 3 kernels to the i386 release:
XEN0 for use as a Xen domain0 kernel
XENU for use on a non-privileged domain
INSTALL_XENU to install NetBSD on a non-privileged domain virtual disk.
2005-03-11 20:55:10 +00:00
christos 9e47818662 Only make bpf, not bpfN 2004-12-02 16:44:28 +00:00
tron 8849562832 Add new kernel configuration for ACPI based SMP systems which can also be
used to utilize Hyper-Threading.
2004-07-23 17:57:41 +00:00
he 3d7c07bfa4 Allow the user to specify which file system image to use as the
boot image of the CD-ROM via the CDROM_BOOT_IMAGE variable.  The
user may want to create a bootable image with bootlap-big.fs which
uses the INSTALL_LAPTOP kernel configuration instead of the default
boot-big.fs image which uses the INSTALL kernel configuration.
2004-07-23 15:25:04 +00:00
christos 0553899e97 remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
2004-06-20 21:30:26 +00:00
jdolecek 1b00681156 switch over to unified MAKEDEV 2003-10-24 20:12:04 +00:00
jdolecek 7a46124ea4 determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
jdolecek 7126da0813 MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
jdolecek 2d42eb283b reassing majors for crypto and pf to use the newly defined MI major range 2003-10-10 22:47:10 +00:00
dsl 5c2824bce4 Revert 'console' back to /dev/console (from /dev/constty) 2003-10-04 07:41:11 +00:00
dsl e5217087d8 Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
2003-10-03 14:54:20 +00:00
dsl fca3294820 Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
pooka 12cd483962 add isdn telephony dialout devices 2003-09-19 11:11:37 +00:00
dsl 818622e67a Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
itojun 4440262659 create /dev/crypto 2003-08-22 05:06:22 +00:00
itojun 3f14c71f75 reserve cdev major # for PF. ok'ed by technical-exec 2003-07-27 14:17:57 +00:00
wiz 804526377b Remove device nodes for obsolete olms and omms drivers.
Except for i386, the driver never existed for that port anyway...
2003-05-15 13:18:05 +00:00
thorpej 003c4a9e6c Add /dev/icp*. 2003-05-13 15:44:32 +00:00
augustss 528dbaae90 Remove ksyms before mknod ksyms. 2003-05-09 00:13:50 +00:00
christos e98429f32c fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.
2003-05-07 13:41:34 +00:00
ragge ce0bf5c28d Add ksyms to "std" devices. 2003-04-27 13:15:28 +00:00
thorpej 860e1121cf Add /dev/power (part of sysmon). 2003-04-18 06:00:46 +00:00
fvdl c3065b2a37 Create two ptys in the init case. You never know, you might need them
(sysinst does).
2003-04-17 18:51:23 +00:00
fvdl 750b5b8327 Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
perry 2f1f870fa8 make ipl consistently "IP Filter" 2003-03-31 03:58:55 +00:00
wiz 8dab8f4d58 Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959. 2003-03-30 17:41:51 +00:00
jdolecek 68756e42ca don't need duplicate nsmb entry in 'Special devices' 2003-02-18 12:29:43 +00:00