e4cbd13089
Regen.
2003-12-09 18:58:49 +00:00
237307078f
Add second ID for Intel i960 RM.
2003-12-09 18:58:16 +00:00
34f5b5e378
The highest 16 bits of chipid identify the ASIC, so print only them.
2003-12-09 15:19:33 +00:00
e296f9bf6e
Catch break for cn_check_magic() and remove the pmax-specific hack.
2003-12-09 14:30:55 +00:00
3c0925818d
Match 5703 ASIC A3.
...
Also, when printing the ASIC ID, print the revision in hex in all
cases to avoid extra confusion if only the "superclass" of the ASIC
is recognized.
2003-12-08 17:09:39 +00:00
a17096b1a3
regen for broadcom 5703a3
2003-12-08 17:05:27 +00:00
9747421fda
Broadcom 5703 A3
2003-12-08 17:00:48 +00:00
0695d77aa5
Regen
2003-12-08 11:07:27 +00:00
5379b99913
Add an entry for Intersil's Prism-54 (ISL3890) WLAN mini-PCI card.
2003-12-08 11:06:36 +00:00
d0ab1c6564
regen.
2003-12-07 10:37:28 +00:00
21b20ac54f
add bluetooth products
...
Anycom BlueCard LSE041 R1B
Anycom Bluetooth CF Card LSE039
2003-12-07 10:37:11 +00:00
609617af90
Enable RSSI-based rate-adaptation for wi(4). This enables wi(4)-based
...
APs to run at "full speed" where before they ran at just 1 or 2Mb/s.
The AP will adapt the data rate for each client based on packet
losses and the received signal strength.
I have also enabled rate adaptation for STA mode and for IBSS mode,
but the hardware gives us less control over the data rate in those
modes.
2003-12-07 05:44:49 +00:00
d942dc3968
In _STA mode, don't panic when a stray beacon-miss interrupt is
...
received. Instead, ignore it. It's normal for a stray to come
during the transition to monitor mode.
2003-12-07 05:09:02 +00:00
9270de9dc4
Updates to 802.11 radiotap. The _DB_ flags were used everywhere to
...
denote a signed dBm Rx power, so rename them to _DBM_ and change
the signedness. Add new _DB_ flags for unsigned Rx power measured
from an arbitrary reference.
Try to synchronize net80211/ieee80211_radiotap.h with my tcpdump
sources (which public tcpdump has not seen, yet) and with FreeBSD.
2003-12-07 04:49:17 +00:00
78b6786442
Make the MASK_TO_SHIFT expression less "tall." Hopefully helps
...
work-around the gcc bug reported by Erik Osheim.
2003-12-07 04:22:57 +00:00
69ed3fa879
Cosmetic: add some whitespace for readability.
2003-12-07 04:19:27 +00:00
464de24c0e
Clone artisea_chip_map() for use by the ICH5 SATA controllers.
...
The 31244 is really different from the ICH5, and one day the map function
could be incompatibles. Suggested by thorpej@
2003-12-06 22:40:03 +00:00
3b65e1745b
- disable ipv4 checksum offloading as it seems to have a problem.
...
- add comments to describe it.
2003-12-06 11:27:28 +00:00
d9c37aa325
regen:
...
add NetMos NM9805 and NM9815
2003-12-06 11:20:55 +00:00
89d301d92d
add NetMos NM9805 and NM9815
2003-12-06 11:19:17 +00:00
d8065a9e15
add entry for another NetMos card - NetMos NM9815 Dual 1284 Printer port
2003-12-06 11:18:08 +00:00
315a88c214
Back out the following commit and apply the real fix.
...
A variable was actually used in a wrong way.
> revision 1.20
> date: 2003/10/25 21:31:43; author: christos; state: Exp; lines: +3 -3
> Fix uninitialized variable warnings.
2003-12-06 09:32:22 +00:00
b42d959140
Add support for the Intel 82801ER Serial ATA/Raid Controller.
...
From Simas Mockevicius on current-users@.
2003-12-05 23:12:41 +00:00
d8aa4bc899
Remove bitbang code that was taken from FreeBSD to support recent SiS
...
chipsets and use mii_bitbang interface instead. Reflect sip dependency in
the config file.
Support for SiS96x needs broader testing.
2003-12-05 22:34:44 +00:00
5255e234b9
cac_cmd:
...
* don't let cac_ccb_alloc() sleep since it regularly runs in an
interrupt context
* return EAGAIN instead EBUSY (or -1), which is what the upper ld
layer expects to get on transient resource shortages.
* ignore error from cac_ccb_start(), since a `fifo full' condition is
handled internally in the lower layer, i.e. the transaction started
from ldstart() has been queued at the lower layer and must be taken
off ld's disk queue.
2003-12-05 10:23:00 +00:00
9798a7bc46
Make the chars in the umidi_endpoint buffer unsigned; this fixes at
...
least one sign extension bug which caused umidi input to not work.
2003-12-05 06:05:53 +00:00
07bb045f57
Opening umidi read-only failed to increment ep->num_open because
...
open_in_jack() treated USBD_IN_PROGRESS as a failure return.
2003-12-05 06:01:59 +00:00
0a49c48fe4
remove some extraneous \'s to shut up warning from gawk.
2003-12-05 04:33:27 +00:00
a586448d86
regen
2003-12-05 04:28:47 +00:00
efde88a60f
add Adaptec AAR-1210SA Serial ATA RAID controller.
2003-12-05 04:28:04 +00:00
b8702f530b
netbsd.org -> NetBSD.org
...
This was the last commit of this kind to src/sys, which is now totally
"NetBSD.org clean". Thanks for the patiance, and sorry for all the commits.
2003-12-04 13:57:30 +00:00
8476e6755a
NetBSD.ORG -> NetBSD.org
...
Now all "NetBSD.ORG" are gone from src/sys.
2003-12-04 12:42:54 +00:00
c0ddd8220b
Bump the Tx DMA segment count to 40. Apparently, it's common to have
...
DMA segment counts in this ballpark when using jumbo frames (so says
the "ti" driver).
2003-12-04 06:57:37 +00:00
ca75be9eb7
When performing command pass-through for management tools, don't poll
...
for CCB completion. Instead, sleep, and use a CCB callback to wake the
sleeper.
2003-12-04 05:46:47 +00:00
9ec6a8db4d
Synchronise with <ftp://ftp.t10.org/t10/drafts/spc3/asc-num.txt>:
...
SCSI ASC/ASCQ Assignments
Numeric Sorted Listing
as of 9/12/03
2003-12-03 23:20:53 +00:00
a00292cf94
o Add support for accessing the PHY through MDIO for recent SiS chips
...
o Add support for the recent SiS96x chipsets that have a new revision.
That includes a new bit of code to access the EEPROM, since it is
shared with the ieee1394 controller on those chipsets.
Mostly taken from FreeBSD (rev. 1.62 and 1.64 of sys/pci/if_sip.c). I
tried to make the code look less ugly, but couldn't invent documentation.
Fix PR #23481 . Thanks to Stephane ENGEL <sengel AT melshake DOT com> for
the report and the cheerful testing.
2003-12-03 21:58:49 +00:00
67e9511d69
Move WDC_NREG from wdcreg.h to wdcvar.h. First part of fix for
...
port-macppc/23604.
2003-12-03 12:01:18 +00:00
a4f6bad750
Configure PCI-Cardbus bridges, too.
...
Patch from KIYOHARA Takashi on current-users.
2003-12-02 16:31:06 +00:00
0041177a45
Use a different interrupt routine for the CSB6. The CSB6 doens't
...
assert IDEDMA_CTL_INTR for non-DMA commands.
It would be nice to have a way to know if the interrupt was for us or not at
this point, but for now let wdcintr() deal with it.
Problem reported and patch tested by Martti Kuparinen.
2003-12-02 12:20:06 +00:00
5f01dc8ab2
Revert revision 1.3 "add sysctl support to firmware loader" by
...
"removing sysctl support from firmware loader". It was never
referenced or called from anywhere...
Suggested by augustss@netbsd.org in private email.
2003-12-01 01:09:24 +00:00
c64b77bad6
add definitions of new feature bits.
2003-11-30 14:05:47 +00:00
b9bb4e3f05
- rename WDC_CAP_LBA48 to ATA_CMD2_LBA48.
...
- remove WDC_CAP_QUEUE. (there's already ATA_CMD2_RWQ.)
as discussed on tech-kern@.
2003-11-30 13:57:12 +00:00
c6ae6a7dbd
Update for new wdc.c with indirect register mapping.
2003-11-29 20:30:27 +00:00
8e1125601f
Include wdcreg.h for WDC_NREGS (used by wdcvar.h).
2003-11-29 19:33:34 +00:00
fc44e8511e
Patterned after the rest of the code, add one more check that
...
chp->wdc is non-null before de-referencing it.
2003-11-29 16:17:31 +00:00
669d2bb92c
add support for HPT302 and HPT371. simplify timing selection.
...
adapted from OpenBSD. tested on an HPT302, review by bouyer@.
2003-11-28 20:08:29 +00:00
3bf428ce23
regen
2003-11-28 20:05:14 +00:00
9bff23d0a5
add Tandem ServerNet II and various HPT IDE controllers.
2003-11-28 20:04:16 +00:00
86048e5a3d
always check whether a display is attached before calling
...
wsdisplay_*() functions
2003-11-28 13:32:55 +00:00
4d60676c44
-remove a check of errno against -1, this is nonsense since
...
we have EPASSTHROUGH
-remove a superflous #if NWSMOUSE
2003-11-28 13:19:46 +00:00
ad