11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
a50bf9a39a
Include word access methods with stride 4.
...
Add a byte-swapping access_method array for use with MI wdc driver.
XXX Currently only read_multi_2 and write_multi_2 are used by MI wdc code;
XXX The other byte-swapping routines still need to be added.
2000-02-01 05:21:24 +00:00
d166ec2056
Do not forget to init intr_private
2000-02-01 04:14:18 +00:00
33051e5117
Use device_register to find the boot device more reliably. Should now work
...
on anything it's possible to boot from that we have a driver for.
2000-02-01 04:04:17 +00:00
aedaba9bc9
add strtoul
2000-02-01 04:02:59 +00:00
f77befbc84
#define __HAVE_DEVICE_REGISTER on ports that have it, and check for
...
that, rather than a list of architecture defines, in config_attach
2000-02-01 04:01:19 +00:00
be6d4a9d34
Fix chrtoblktbl[] array to reflect reality.
2000-02-01 02:59:30 +00:00
5b465690f2
Have .set mips3 directive to make it consistent with other *.S files.
2000-02-01 02:30:20 +00:00
a49e53d3df
(sys_open, sys_fhopen): remove declaration of vnops, now in
...
<sys/file.h>
2000-02-01 01:24:38 +00:00
e4b59906e1
(exec_script_makecmds): remove declaration of vnops, now in
...
<sys/file.h>
2000-02-01 01:23:29 +00:00
5b428483d9
add declaration for `vnops'
2000-02-01 01:22:45 +00:00
33e8c5b1df
Improve the readability of one small piece of code.
2000-02-01 00:18:29 +00:00
ae788a8a43
sync with current code. now IMPLEMENTATION doc is almost identical
...
to the latest KAME one.
2000-02-01 00:15:22 +00:00
3b5706e2e5
Fix a couple of whitespace glitches.
2000-02-01 00:07:50 +00:00
637a2eee6e
Use ifatoia() and sintosa() consistently, rather than using home-grown
...
casting macros intermixed.
2000-02-01 00:07:09 +00:00
1cb24101b9
Small amount of cosmetic cleanup.
2000-02-01 00:05:07 +00:00
3bf4c0f68b
Small cleanup.
2000-02-01 00:02:01 +00:00
af62350e32
Un-obfuscate a small bit of code.
2000-02-01 00:00:22 +00:00
891a2a9719
Implement bpfdetach().
2000-01-31 23:06:12 +00:00
1d24598795
Add check for wdc [MI wdc support].
...
Move 'cd' device back to end of the genericconf table - we want to check
the 'wd' device before the 'cd' device.
2000-01-31 22:51:53 +00:00
f12b50fc81
Add the wd devices for MI wdc IDE drive support.
2000-01-31 22:49:12 +00:00
64f779675a
Fix a couple more references to STRIPPROG.
2000-01-31 22:47:11 +00:00
97107f760d
Add the config information for the MI wdc support.
2000-01-31 22:47:07 +00:00
554647f636
Semicolons in the 32-bit macros aren't nice.
...
Add a stride-4 with swapping bus_space_method for use by MI wdc.
2000-01-31 22:43:36 +00:00
daa36b1b58
Rename TAILMASK to HEADMASK, since it really masks the head pointer.
...
From FreeBSD.
2000-01-31 22:35:13 +00:00
cc46ffeb91
Change where the has table for physical-to-virtual address translation
...
is handled. Partly from FreeBSD.
2000-01-31 22:09:13 +00:00
964e21e33a
Use ${RM}
2000-01-31 21:08:11 +00:00
ae4bbc4485
Fiddle with over-current protect when turning on port power to make
...
things work for some OHCI controllers.
2000-01-31 20:17:25 +00:00
c9aa323521
Change the way the HC done method is invoked a little.
2000-01-31 20:13:07 +00:00
09dd6fc81d
Make these build again after buf.h/disksort changes.
2000-01-31 19:04:52 +00:00
547bd53f89
Add support for the SiS 7016.
2000-01-31 18:36:12 +00:00
f457f7c969
Regen.
2000-01-31 18:34:51 +00:00
a2efc77ee1
Add SiS 7016 10/100 Ethernet.
2000-01-31 18:34:19 +00:00
3cb8a24438
Regen
2000-01-31 16:41:20 +00:00
7ccc44e6f7
__semctl13 -> ____semctl13
2000-01-31 15:59:58 +00:00
72ff1dee2f
Regen
2000-01-31 15:53:46 +00:00
44b3655e9d
__semctl13 -> ___semctl13
2000-01-31 15:53:01 +00:00
e44d6b7781
ELF*_MACHDEP_ENDIANNESS was undefined.
2000-01-31 15:51:35 +00:00
f227455441
make "make build" work
2000-01-31 15:50:13 +00:00
3d9c5d0450
Regen
2000-01-31 15:13:24 +00:00
3cbe025990
__semctl13 -> ____semctl13 because this now is not called directly.
...
The fourth argument to it is a pointer to union semun not union semun,
because passing structs and unions to syscalls cannot be handled portably.
2000-01-31 15:12:30 +00:00
00ba4de9e2
Add `si' and `sw' controllers to device_register() tables.
2000-01-31 15:08:25 +00:00
1a2a1e2b1f
bring in latest KAME ipsec tree.
...
- interop issues in ipcomp is fixed
- padding type (after ESP) is configurable
- key database memory management (need more fixes)
- policy specification is revisited
XXX m->m_pkthdr.rcvif is still overloaded - hope to fix it soon
2000-01-31 14:18:52 +00:00
dbbc9025d2
Add 'Reverse Video' check box.
...
Now 'Black-on-White screen is default.
2000-01-31 12:45:29 +00:00
fdd3f14b2a
add BTN_COVER for MC-R700, MC/R730.
2000-01-31 11:44:01 +00:00
425e99ac00
Check that we can handle the inode size before mounting the fs, and correct
...
a return value.
2000-01-31 11:34:55 +00:00
63fd2c0262
destination port == 0 is illegal based on RFC768.
...
(NetBSD PR: 9137 - I thought I committed this already but I wasn't)
2000-01-31 10:39:26 +00:00
9b7c3e737a
be proactive about malicious packet on the wire. we fear that v4 mapped
...
address to be used as a tool to hose security filters (like bypassing
"local host only" filter by using ::ffff:127.0.0.1).
2000-01-31 10:33:22 +00:00
2e9b49c888
Force power off when a CardBus card is detached.
...
Use tsleep when kernel thread works.
2000-01-31 08:49:07 +00:00
a72f993570
When possible, use ring mode for descriptors. Not only is this slightly
...
more efficient on genuine DEC chips, but some clones apparently Lose Badly
if you use chain mode. To further complicate things, some clones *only*
do chain mode, so make this whole mess conditional.
2000-01-28 23:23:49 +00:00
59fbdbb7cb
Just use a regular Tx descriptor for the setup packet; don't bother with
...
a separate one.
2000-01-28 22:23:58 +00:00
cb239424d0
Fix part of previous commit.
2000-01-28 18:27:41 +00:00
839e3f4725
Make it possible to read /dev/usb so the USB event mechanism can be used.
2000-01-28 17:26:03 +00:00
26944f9bf6
Add bpp (parallel port) device.
2000-01-28 16:08:52 +00:00
be4a409b30
Correct (minor) bogons in filetype option support, and add support
...
for sparse_super option
2000-01-28 16:00:23 +00:00
f18d4a028b
Define the fixed hme PHY addresses.
2000-01-28 15:52:34 +00:00
437ad6d192
Reset audio chip on device open.
2000-01-28 15:49:44 +00:00
8b07bf2245
standard nomencature: bp -> bh
2000-01-28 15:47:18 +00:00
a5d6b10bad
fdcstatus() formatting.
2000-01-28 15:46:20 +00:00
39bbf02101
Delete unused lines.
2000-01-28 15:18:32 +00:00
ae6160e233
CPU specific idle hook and VR idle routine.
2000-01-28 15:08:36 +00:00
48205b1acc
Delete unused lines.
2000-01-28 15:02:11 +00:00
ef79cf035a
Correct error message list. From Nick Hibma.
2000-01-28 13:32:55 +00:00
6e5c754b80
Set the right ethertype in LLC header for PVC interface.
...
Pointed by onoe@sm.sony.co.jp
2000-01-28 13:27:29 +00:00
2f0be0855f
pv_unlink4m: correctly clear the PV_ANC flag. Noted by Artur Grabowski.
2000-01-28 13:06:02 +00:00
adedf8475e
BUFQ_* fixes.
2000-01-28 11:30:22 +00:00
119272426a
Fix typo. From Nick Hibma.
2000-01-28 10:19:48 +00:00
a6ee792cee
The decision that `disksort_cylinder' uses to decide if the buffer needs
...
to go to the inversion list is incomplete. If the cylinders are equal
block numbers must be checked.
This caused lockups if some buffers with the same cylinder were cycling
through the list, as it may happen with softdep enabled.
Fixes PR #9197 .
2000-01-28 09:27:38 +00:00
26c744c85b
remove a debug printf that has outlived its usefulness.
2000-01-28 08:02:48 +00:00
591ffe9e30
wrap "DAD start" message into #ifdef DIAGNOSTIC.
...
From: thorpej, "Soren S. Jorvang" <soren@wheel.dk>
2000-01-28 07:21:29 +00:00
e35089652c
platid regen.
2000-01-28 06:22:53 +00:00
8f9ba8c314
add MC/R730
2000-01-28 06:22:10 +00:00
69cb6f62a5
add MC/R730 platid.
2000-01-28 06:21:49 +00:00
9ddaa2112f
Nuke isbad(), and fix typos.
2000-01-28 02:25:24 +00:00
8cc78f4f7d
Small restructuring: break out opening of pipes into its own function.
2000-01-28 00:51:25 +00:00
3eccf22362
GC a #define.
2000-01-28 00:45:55 +00:00
30f0efb4f2
Add uhci_root_ctrl_done() method.
2000-01-28 00:44:27 +00:00
9cd4bf4652
Remove the hack that handled truncated transfers.
2000-01-28 00:29:53 +00:00
4e9e8e52f4
Change the test to check if transfers are done. The old test was broken
...
and sometimes reported transfers as done prematurely.
This fix seems to stabilize the Ethernet drivers.
2000-01-28 00:15:54 +00:00
3c27de72ac
Fix typo in tailp bit defines. From Nick Hibma.
2000-01-28 00:11:38 +00:00
10dd6e61c3
Regen.
2000-01-28 00:09:19 +00:00
d4dda219e1
Fix typo.
2000-01-28 00:08:57 +00:00
77e40e844d
Add some defines for TLSB interrupt mask and summary registers. Update
...
copyright.
2000-01-27 22:27:50 +00:00
22a3504708
Make this work on the G4 too.
2000-01-27 17:39:20 +00:00
68e6de32b3
Add missing '#include "opt_vax630.h"' for custom kernels.
2000-01-27 17:06:55 +00:00
e7ea87d850
Adapt for matt's changes.
2000-01-27 16:58:44 +00:00
c74e0a8db2
Add detachment support to the MII layer.
2000-01-27 16:44:30 +00:00
ecd94f5ee0
s/NUMODEM/NUCOM/
2000-01-27 15:41:19 +00:00
249975c3c9
Revert (accidentally removed) MAXSLP macro.
2000-01-27 09:47:12 +00:00
7978d0205b
- _MACHINE_ARCH was undefined, MACHINE_ARCH was wrong.
...
- make "make includes" work
2000-01-27 07:50:02 +00:00
39cd3507d2
make "make includes" work
2000-01-27 07:49:13 +00:00
76d3003c00
- add MC-R510 & MC-R530 cover button.
...
- add MC-R530 application dial button.
- add comment for no RTC_OFFSET.
2000-01-27 06:55:26 +00:00
6591d38772
- modify debug stuff.
...
default all disable.
2000-01-27 06:28:41 +00:00
9dbdea95dd
- show bus clock freq setting and memory clock freq setting in boot time.
2000-01-27 06:25:54 +00:00
674bb73d1e
- fix using uninitialized argument of bitdisp64().
2000-01-27 06:23:05 +00:00
b59afe2607
- fb_mmap(): treate about unaligned framebuffer memory (MC-R510).
2000-01-27 06:18:03 +00:00
3e79c827d4
Fix PR 9302. Fix provided by Hauke Fath (hauke@Espresso.Rhein-Neckar.DE).
2000-01-27 02:26:17 +00:00
cf83f4ae57
Use delay by default on hpcmips for now.
2000-01-27 01:05:17 +00:00
e00a11df5e
Make it easy to switch between using attribute memory and not.
2000-01-26 22:28:38 +00:00
906dd16a7b
Use STRIP instead of STRIPPROG since install uses STRIP and I don't want to
...
define two different variables.
2000-01-26 22:04:18 +00:00
tsutsui