Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
60,734 Commits 606 Branches 0 Tags 3.1 GiB
e37a4f8dcc
Commit Graph

19 Commits

Author SHA1 Message Date
thorpej
22fe15d7b4 Let mii_phy_setmedia() handle the IFM_AUTO case, too. 2000-02-02 23:34:56 +00:00
thorpej
8923ca0b00 Make PHY drivers provide a pointer to their status routine, and add 
a generic mii_phy_status() that calls back into the PHY.  It doesn't
do anything interesting yet, but it will soon.
 2000-02-02 17:50:43 +00:00
thorpej
eed75dbc26 Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass 
flags down from the parent to child vi mii_attach().
 2000-02-02 17:09:38 +00:00
thorpej
84dc99fdea Bring some order to the chaos which was the MII code function naming 
"conventions".
 2000-02-02 08:05:26 +00:00
thorpej
c74e0a8db2 Add detachment support to the MII layer. 2000-01-27 16:44:30 +00:00
pk
03c8221ad0 Use BMSR to test for `negotiation complete'; the alternative bit in the 
LXT vendor register 20 is latching high and resets to low on read causing
subsequent status request to return `IFM_NONE'.
 1999-12-21 10:47:00 +00:00
thorpej
bca88a28c8 Add mii_down(), which is used by MAC drivers to inform PHYs that the 
interface is now down.  PHYs use this to cancel pending asynchronous
operations.
 1999-11-12 18:12:59 +00:00
thorpej
8fc600c3b1 Clean up the code that adds media a little, and make media selection 
table-driven in preparation for some other changes to be made.
 1999-11-03 22:30:32 +00:00
drochner
23ddff5688 use the new "xx" prefixed OUIs because the mapping to the ID register 
bits differs from the MII_OUI() way
 1999-05-14 11:40:28 +00:00
thorpej
83f9ab3c87 Implement asynchronous autonegotiation when driven by the MII tick 
(one-second clock).  Prevents .5s delays every 5 seconds when the interface
is up but there is no link.  Fixes PR 7361.
 1999-04-23 04:24:32 +00:00
thorpej
2b695df1dc Common code for media-from-bmcr. 1998-11-05 04:08:01 +00:00
thorpej
aabf2a0809 In the status routine, always use the media selected in the BMCR if 
autonegotiation is not enabled.  This is more reliable on many PHYs,
and requires fewer register reads.
 1998-11-05 04:01:32 +00:00
thorpej
2a17544c19 Place the essentially common "ticks" and "active" members into the 
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
 1998-11-05 00:19:32 +00:00
thorpej
ad8b66c7c8 Return a higher-priority match than 1. These are specific drivers. This 
allows for a "generic unknown PHY" driver to be implemented.
 1998-11-04 23:44:09 +00:00
thorpej
51da8fc39f Factor out the common reset code. Use the NOISOLATE flags as appropriate 
to prevent a PHY from being isolated in the event the MAC can't deal with
this.  (3Com 3c905B-TX, and Intel i82557).
 1998-11-04 23:28:15 +00:00
thorpej
b097394468 Factor out some common code from all the PHY drivers (autonegotiation, for 
now.)
 1998-11-04 23:07:15 +00:00
thorpej
844622de9c Define and use generic PHY read/write reg macros. 1998-11-04 22:15:40 +00:00
thorpej
1f074c785d When doing a media change service request, use the media word from the 
current ifmedia_entry, not from the user-supplied media word.  The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.

Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
 1998-11-02 22:31:36 +00:00
thorpej
86fca03a0d Driver for the Level One LXT-970 10/100 Ethernet PHY. 1998-10-24 00:33:17 +00:00