44c6ce78d2
Avoid the name free so the MALLOCLOG option works again.
...
Fix some typos.
1998-03-03 09:16:15 +00:00
43ba4e27bd
Adjust for config changes.
1998-01-12 08:44:08 +00:00
a908b2b30e
Fix three problems spotted by mycroft:
...
- Closing the audio device should stop recording.
- Manipulating the pause function could accidentally start playing or recording.
- AUDIO_FLUSH could accidentally start playing or recording.
1997-12-03 01:01:19 +00:00
b366d54e2e
Fix slight glitch in last commit when AUDIO_DEBUG is on.
1997-10-29 02:11:45 +00:00
9f84e63746
Do audio attachment the right way. From Chris Demetriou.
...
(Maybe I'll get the hang of the configuration stuff one of these days. :-)
1997-10-29 02:00:20 +00:00
e7029fc0da
Make the audio API (almost) SunOS compatible.
...
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
25ea46120a
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it.
...
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c
1997-10-16 23:57:56 +00:00
31ab81c6e4
Aignore interrupts if the device isn't open.
1997-10-16 16:41:18 +00:00
0d79fbe5c5
Don't test for unused methods.
1997-10-14 18:43:42 +00:00
3cdff9d435
GETPROPS does not indicate whether the device is currently in full-duplex
...
mode. Reinstate GETFD to return this information.
1997-10-11 11:16:28 +00:00
4f2068ec29
Sanity check hi/lo water mark settings better.
1997-10-07 22:40:43 +00:00
ffcdaf144d
Move around splaudio() to (hopefully) get rid of some rare race conditions.
...
Add a missing call to round_blocksize.
Add some MIDI stuff that will be used in the future.
1997-09-06 01:14:48 +00:00
d2a9d1970d
Don't deference a bad pointers if you try to open an audio device that's
...
not configured.
1997-08-27 18:54:28 +00:00
955e1e9119
Make sure audio device starts in half-duplex mode and document the fact.
1997-08-26 19:03:55 +00:00
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
e5b75f05d4
Make a slight change to when blocksize, hi- and lo-water marks are
...
recalculated. The new semantics is more intuitive(?) and makes Doom
work :-)
1997-08-18 23:20:09 +00:00
34085fae66
Implement /dev/audioctl. It behaves much like /dev/sound, but only
...
allows ioctl() and can be opened at any time.
1997-08-18 21:19:02 +00:00
8f096d087f
Implement delivery of SIGIO on changes to /dev/mixer.
1997-08-11 01:38:12 +00:00
9a770a177f
Make setting the audio block size sticky.
...
Change the calculated block size to correspond to 50 ms of sound
(was 20 ms, it seems needlessly small).
1997-08-08 00:03:26 +00:00
3c6f8bc89e
Restructure a little to make sure AUDIO_FLUSH restarts the looping DMA.
1997-08-06 23:08:26 +00:00
aae99e192d
%x -> 0x%x
1997-08-06 07:39:59 +00:00
c392128002
Audio:
...
* Make it possible to use software assisted encodings that expand the
sample size.
* Use 16 bits per sample when emulating mulaw coding on the SB.
* Prepare for SB16 without CT1745 mixer.
1997-08-04 09:29:51 +00:00
3bef8402d3
Implement FIONBIO in audio_ioctl.
1997-08-01 17:04:00 +00:00
658656bb99
Audio changes:
...
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
1997-07-31 22:33:08 +00:00
a63034762b
Audio: Remove the machine dependant code I put in audio.c by mistake.
...
This adds another method to audio_hw_if. Also remove a field from
audio_hw_if that was not read-only.
1997-07-28 20:56:05 +00:00
d5b1561c91
Temporary fix to make it compile on non-i386.
1997-07-28 09:28:04 +00:00
f6cd87f322
audio: Minor cleanup and enable looping DMA for PSS and PAS.
1997-07-28 01:31:50 +00:00
d58bc6796f
audio: Simplify handling of AUDIO_SETFD and committing of encoding mode.
1997-07-27 23:51:48 +00:00
63decd9438
Fix divide by 0 bug in audio driver.
1997-07-27 23:06:04 +00:00
9745684ebe
Changes to the sudio system:
...
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
1997-07-27 01:16:32 +00:00
8727da130b
In the name of backwards compatibility AUDIO_ENCODING_LINEAR has been
...
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
1997-07-15 07:46:04 +00:00
73ff4bd775
Allow more than one hardware driver to attach to the audio upper layer.
1997-05-27 23:24:56 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
4b487c00bd
Clean up audio_silence_copyout().
1997-05-11 00:41:12 +00:00
c7be49441e
fix typo: LINEAR should have been ULINEAR
1997-05-10 19:01:53 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c397fa8357
Return audio buffer size in audio_info_t with ioctl() AUDIO_GETINFO.
...
Use the buffer size to implement one more OSS ioctl().
1997-05-07 19:24:25 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
269ccaa71b
Fix typo in last commit; from Thorsten Frueauf <frueauf@ira.uka.de>
...
in PR/3566.
1997-05-01 12:27:10 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
231a4bfb1f
Remove bogus pointer cast.
...
Accept FIONBIO ioctls.
1997-04-19 21:25:43 +00:00
2c6048e49f
Make sure to recalculate the block size after changing the
...
sampling rate. Also, nuke the global variable audio_blocksize.
1997-03-20 16:13:55 +00:00
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
8b4878a6ba
Fill in silence-padded blocks so we don't get gaps. From PR 3357,
...
by Lennart Augustsson.
1997-03-20 03:19:53 +00:00
b0c4e068d0
Modify audio_fill_silence() to take an encoding number rather than a softc*
...
and mode.
1997-03-13 02:45:07 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
1c47a4325b
close 3079 from Jason Baker -- fixes a test in audio_poll
1997-01-18 04:02:58 +00:00
39379f9a46
Reset `sc_async' on device close.
1996-11-01 23:05:45 +00:00
augustss