c36b0cda5a
Cache .OBJDIRS of LIBDPLIBS commonly used in SUBDIRs,
...
to speed up recursive makes from this directory (or above).
Note: this uses MAKEOVERRIDES, and may need special treatment
for host platforms that have limits in this area.
2004-08-04 11:10:19 +00:00
64a063e68b
The do-lib-XXX BUILDTARGETS are obsolete now that we use LIBDPLIBS in
...
lib/**/Makefile.
(We still need to use .WAIT in lib/Makefile to enforce the subdir
dependency ordering.)
2004-08-04 09:38:56 +00:00
f4b86cdac7
Convert from DPADD/LDADD to LIBDPLIBS (from bsd.lib.mk), which allows
...
libraries to be linked at other libraries that have been built but
not yet installed.
2004-08-04 08:37:04 +00:00
1c6a48e6b6
newsmips X server configurations.
2004-08-01 18:52:03 +00:00
8ed1467c3c
Remove duplicate .PATH definition.
2004-07-23 16:28:18 +00:00
e4c49c37de
Build lib*_pic.a only for loadable modules on dlopen() targets.
2004-07-14 13:34:13 +00:00
261a705deb
Don't install *_pic.a libraries in DESTDIR for non-MIPS architectures.
2004-07-14 09:44:26 +00:00
730b098c45
Add the .c and .h files generated from *.psw to DPSRCS.
...
Add -I. to CPPFLAGS.
This should fix a build problem highlighted by rtr@ in private mail.
2004-07-13 16:15:28 +00:00
0a541ba0ea
Enable "loadable module" dlopen() scheme. Necessary to crossbuild the XFree86
...
server on platforms that are not supported by the Metrolink module loader
(i.e., MIPS).
Enabled for sgimips in bsd.x11.mk.
2004-07-13 09:29:45 +00:00
f3970e5667
make Xdreamcast compile again. (work fine.)
2004-07-06 13:41:13 +00:00
0a3a939b03
Relocate X68kConfig from X11LIBDIR to X11ETCDIR
2004-06-13 11:47:41 +00:00
e3bc441d7b
Don't install xterm setuid anymore:
...
- pty ownership is handled by ptm(4)
- utmp updating is handled by utmp_update(8)
2004-06-09 20:37:41 +00:00
b817247988
Use MKPRIVATELIB=yes instead of providing an empty libinstall:: target and
...
setting NOLINT, NOPIC, NOPROFILE (etc)
2004-05-23 02:24:50 +00:00
64ac75227d
Use ${X11ETCDIR} instead of /usr/X11R6/lib/X11 for the location of XF86Config.
2004-05-17 23:50:09 +00:00
10cfcae8fc
Radically overhaul X11 configuration:
...
* End user modifiable configuration has moved from
/usr/X11R6/lib/X11/<someprog>
to
/etc/X11/<someprog>
This is consistent with our own policies as well as other projects.
The files & directories that were moved have _NOT_ been marked
`obsolete', as they contain user configuration and therefore we
don't want the automatic "obsolete file removal" mechanism to
remove them.
* The /etc/font/* and /etc/X11/* configuration files are installed
with 'configinstall' (not 'install'), using CONFIGFILES and
CONFIGSYMLINKS.
This is so that a normal 'make build' in src/x11 will not
trash your configuration.
* A 'distribution' target has been added to src/x11 to perform
'make configinstall' in the appropriate subdirectories.
(Should we consider making 'configinstall' a first-class target?)
* The xdm pixmaps have have been moved to /usr/X11R6/include/X11/pixmaps
where the other pixmaps are.
(I don't consider these pictures end-user configuration).
IMPORTANT NOTE:
* These changes require an up to date xsrc, and 'make cleandir' should
be performed in src/x11 before a build for the changes to fully take
effect.
2004-05-16 10:25:13 +00:00
dedc7522a7
Drop optmization to -O0 for sh5 for one file to work around an
...
internal compiler error.
2004-05-14 07:21:24 +00:00
7cf5573a11
Drop optmization to -O0 for sh5 for one file to work around an
...
internal compiler error.
2004-05-13 22:32:47 +00:00
64c96922cf
Now that the missing libm functions are available on the vax, build
...
glxgears and glxinfo. This will fix the checkflist failure on the vax
build.
2004-05-13 21:10:36 +00:00
aadb133a30
BYTE_ORDER is handled by Xarch.h
2004-05-13 09:31:11 +00:00
7c51496531
Use /var/db/xdm (instead of /usr/X11R6/lib/X11/xdm) as the default authDir.
2004-05-12 03:58:47 +00:00
ee4b534db0
more stuff to deal with. (maybe rtr feels enthusiastic? (hint hint :))
2004-04-29 06:08:34 +00:00
7e0102df65
Add some #defines missed in the upgrade to XFree86 4.4.x
2004-04-29 05:58:54 +00:00
d2df9b79b4
Sync to changes made in XFree86 4.4 and add -DXFREE86_FT2 appropriately.
2004-04-29 05:18:25 +00:00
0a6b839847
Install VeraIt.ttf, per PR [xsrc/25373] from FUKAUMI Naoki.
...
Sort xfont/mi, and cleanup whitespace.
2004-04-29 03:23:44 +00:00
e2d2459f58
Define XDMCP_NO_IPV6 along with XDMCP, as per the "native" XFree86 4.4 build.
2004-04-29 02:14:52 +00:00
7497e851b4
Add -DARC4_RANDOM to the global CPPFLAGS and X11EXTRAMANDEFS.
...
Remove -DDEV_RANDOM, since ARC4_RANDOM takes precedence anyway.
2004-04-29 01:30:17 +00:00
8a1597d78b
Fix up botches in X userland from upgrade from XFree86 4.3.0 -> 4.4.0.
...
(All paths are relative to usr/X11R6)
* Obsolete:
bin/fontconfig-config
* Add directories:
lib/X11/locale/zh_CN.UTF-8
lib/X11/xkb/geometry/ibm
* Rename include/freetype2/ft2build.h to include/ft2build.h and obsolete former
* Add files:
fonttosfnt(1) program & man page
include/expat.h
lib/X11/app-defaults/XClock-color
lib/X11/fonts/TTF/Vera*.ttf
some font encodings
zn_CN.UTF-8 locale
some font encodings
various xkb config files
lib/X11/xedit/lisp/progmodes/patch.lsp
Xfontcache(3) and various links
XDGA(3) and various links
XRes(3) and various links
Xss(3) and various XScreenSaver*(3) links
* Add some more TODO items
* Clean up lib/expat build now that the version is hard coded.
2004-04-28 14:17:55 +00:00
b358d09aa4
- -DXFREE86 if we build an XFree86 server.
...
- use /dev/urandom & hexdump to generate cookies.
mostly as-is from PR#25239.
XXX the #ifdef XFREE86 line in xinit.c is simply for an error message to
XXX include the text "XFree86 XFree86 displays" in an array of char *,
XXX that is used to display an error message. i think nearly all the
XXX netbsd servers need to optionally be added to this list....
2004-04-24 03:42:07 +00:00
e52720514e
The Xprt build needs cfb, and the vax Xserver will soon need the cfb stuff,
...
so enable building cfb. Fixes Xprt build failure on vax when building
from src/x11.
2004-04-23 06:23:42 +00:00
46aadbda46
XINPUT is also needed by vax.
2004-04-23 05:56:47 +00:00
d9fb13565a
only -D_PC on i386/amd64. from PR#25036.
2004-04-17 06:47:04 +00:00
3c42c3d0f0
-DHAS_MKSTEMP for auth.c to enable mkstemp()
...
patch from Nicolas Joly
Should resolve pr#25199
2004-04-16 12:58:06 +00:00
2405f1e72b
while there is no pcvt on amd64, wscons emulates it, and xfree86
...
doesn't like a wscons which doesn't emulate anything, so we have
to use PCVT_SUPPORT to make VT switching work
2004-04-15 15:15:11 +00:00
dad2483208
whitespace cleanup
2004-04-15 14:55:26 +00:00
815a909f67
create an .OBJDIR to make it build on a read-only source tree
2004-04-15 14:54:32 +00:00
403f84395e
pass -export-dynamic to the linker, otherwise the dlopen() loader is
...
pointless
2004-04-15 14:53:40 +00:00
5f373dba65
use mmap() on amd64 to activate the loader.c hack
2004-04-15 14:52:03 +00:00
ff5f1b28ec
convert from (cd ${foo} && ${MAKE} bar) to ${MAKEDIRTARGET} foo bar
2004-04-13 12:50:34 +00:00
6eaa37b67d
add -DDARWIN_NO_CARBON to HOST_CPPFLAGS so that cross build on macos
...
will not attempt to use mac specific resource fork font support.
2004-04-12 15:41:27 +00:00
323c238021
remove DPADD=${LIBZ}, since a host tool should not depend on /usr/lib/libz.a
...
even if it is using the system libz
2004-04-12 03:11:00 +00:00
9a6b10ea6b
mirror change in Imakefiles: provide DEFAULTVT=vt05 for amd64 as well.
2004-04-05 12:21:04 +00:00
f6c0266f4d
Add -I${X11SRCDIR.xc}/lib/xtrans, -I${X11SRCDIR.xc}/lib/GL/glx, (etc)
...
as appropriate.
Based on fix from Hubert Feyrer, cross-checked with the native Imakefiles.
2004-04-05 12:03:25 +00:00
18923ab6c1
Add -DUSE_X86_ASM -I${X11SRCDIR.xc}/extras/Mesa/src/X86
...
to the global CPPFLAGS when building on i386. Fix from Hubert Feyrer.
2004-04-05 12:01:42 +00:00
9e2ca4378e
Add -I${X11SRCDIR.xc}/extras/expat/lib to CPPFLAGS.
...
Should fix problem Hubert Feyrer was experiencing.
2004-04-04 00:20:45 +00:00
0b6352e327
Xfree68 server code. Brought over from Xfree 3.
...
XXX: This does not compile and some extra code needs to be brought across.
2004-03-28 15:31:32 +00:00
e7d8e3d1a1
Add XFree68 directories.
2004-03-28 15:28:24 +00:00
5d5ac9781d
When using dynamic module loading on arm, we need to link in libarm. This
...
is so we can find icache sync functions.
2004-03-28 15:19:30 +00:00
abd1c81ab7
Add iplan libraries.
2004-03-28 14:30:38 +00:00
55817e09ea
Add iplan sub-directories.
2004-03-28 14:24:38 +00:00
3f72c9ae4c
Interleaved plane framebuffer support.
2004-03-28 14:06:26 +00:00
7b58653939
PR misc/24247: Remove duplicate ${LIBI386}.
2004-03-27 15:30:03 +00:00
ca9b535c66
PR misc/24247: Fix typo.
2004-03-27 15:27:01 +00:00
158d2f19f3
Enable IPv6 in XFree86 4.4.0 reachover build. Usage is describe
...
in "/usr/X11R6/lib/X11/doc/RELNOTES". Note particularly that "tcp",
as in "X -nolisten tcp" or "xhost +tcp/host:0", now means *both*
IP transport protocols. Use "inet" or "inet6", instead, to specify
only one or the other.
XDMCP support for IPv6 -- such as it is -- is disabled, just as
it is in the native, out-of-the-box build. XDM-AUTHORIZATION-1
does not really support IPv6 addresses, in any case. (It is
possible to build "xdm" with -DIPv6, but that presumes support
for IPv6-mapped IPv4 addresses in the default installation, for
one thing, and there are unexplored issues with all that.)
2004-03-26 21:29:54 +00:00
5284eba6e3
+ set correct XKB_RULES_DIR path
...
should resolve pr#24815
2004-03-17 23:19:48 +00:00
1743443686
Add a compile flag, MKTTINTERP, that turns on the bytecode interpreter
...
when it is set to yes (typically in /etc/mk.conf)
The freetype bytecode interpreter is not on by default because it is
patented in some jurisdictions.
2004-03-17 23:15:30 +00:00
80b12afa54
Don't override MLINKS for Xsun24; append to it.
2004-03-17 00:18:57 +00:00
3cce4563ce
Don't build as fontmodules or install if X11FLAGS.LOADABLE is empty.
2004-03-16 17:40:53 +00:00
542451dd14
use native libz
...
patch from Krister Walfridsson via pr#24783
2004-03-15 00:39:31 +00:00
4fdf521f76
It's extension, not extention. From Miod Vallat (miod at online fr).
2004-03-14 20:11:24 +00:00
2781c357ae
Only build newport on sgimips.
2004-03-14 17:01:10 +00:00
9c9d9ff61c
Bump XF86 version to 4.4.0
2004-03-14 17:00:30 +00:00
b79da97fe9
Split Xsun servers so that we can build:
...
Xsun, XsunMono, Xsun24 on sparc, sparc64
Xsun, XsunMono on sun3
2004-03-14 08:08:45 +00:00
63acca1d77
Split drivers between obviously i386-only drivers and not
...
macppc/sgimips drivers.
2004-03-14 07:26:58 +00:00
00c7d78b79
+ hardcode_libdir_flag_spec="-Wl,-rpath,${X11USRLIBDIR}" - for both *-config
...
scripts
+ FONTCONFIG_LIBS="-L${X11USRLIBDIR} -lfontconfig" for xft-config
patch from Kouichirou Hiratsuka should resolve pr#24751
2004-03-12 03:59:42 +00:00
020fb098d7
freetype/Makefile
...
+ substitute @hardcode_libdir_flag_spec@ with -Wl,-rpath,/usr/X11R6/lib
+ substitute @LIBZ@ with -lz
fontconfig/Makefile
+ substitute @hardcode_libdir_flag_spec@ with -Wl,-rpath,/usr/X11R6/lib
should resolve pr#24747
XXX native built xf 4.4 may suffer from the same problem
2004-03-11 16:13:30 +00:00
619cc8125d
+ apply patch from Tom Ivar Helbekkmo (pr24735)
...
+ add other missing files in addition to patch
should resolve pr#24735
2004-03-11 01:09:35 +00:00
f52be06c26
Update reachover to build XSUN for sun3
2004-03-10 16:21:16 +00:00
ee69168070
another try:
...
-rename the fonts.dir/fonts.scale targets to avoid collision with
regular files
-allow the rule for "fonts.scale" to be overridden, and do so in
the Speedo Makefile
2004-03-09 16:30:55 +00:00
5418651088
Specifically site Speedo as being the only fonts that use a static in-tree
...
fonts.scale.
2004-03-09 13:25:49 +00:00
4d1b5ab334
make sure the encodings.dir file is copied over after the
...
mkfontscale runs, should fix flist mismatch reported by
cgd, kilbi, smb and Jukka Salmi
2004-03-09 11:41:19 +00:00
5da885fa08
split cleaning: clean .tmp files via CLEANFILES ("make clean"), and
...
clean ${BDFFILES} and ${PCFFILES} via separate rm -f's during "make
cleandir." The need to split these into separate rm's comes from the
fact that some cross-compilation host systems can't deal with the
>128kB arg list that a single 'rm' of all these things would cause.
The desire to clean the actual generated fonts only in 'cleandir' came
from lukem during review.
2004-03-08 22:33:00 +00:00
333cf60a0a
mkfontscale must be run before mkfontdir
...
(can't modern mkfontdir do both at once???)
2004-03-08 09:30:09 +00:00
4945dfe3ca
remove commented out directives not needed
2004-03-07 13:50:25 +00:00
e1152a4b9b
oops missed bump to 1.1
2004-03-06 15:32:33 +00:00
a0b49b5989
+ remove DDB from COPTS (oops)
...
+ add radeon reachover (doesn't build, so commented out in drm/Makefile
SUBDIR).
2004-03-06 11:44:41 +00:00
2a5927e586
+ drm (sub)loadable module
...
+ mga dri lkm
2004-03-06 11:36:05 +00:00
473a0a3bea
userland part of dri for mga and radeon cards
...
XXX
+ common components need to be separated in the future
+ only mga & radeon provided for now
+ necessary to rename libmga_drv.so.n.n -> mga_drv.so by hand
see dri/Makefile for comment.
2004-03-06 10:30:26 +00:00
b02cb79e1a
+ update reachover Xserver/* for xf4.4
2004-03-06 03:31:05 +00:00
c6d0689a6a
+ update reachover include/* for xf4.4
2004-03-06 03:14:23 +00:00
e5713759fc
+ update reachover share/* for xf4.4
2004-03-06 03:13:06 +00:00
628862865b
+ update reachover bin/* for xf4.4
2004-03-06 03:09:36 +00:00
9db533ef43
+ update reachover lib/* for xf4.4
...
XXX font/Makefile needs to be re-examined, but builds for now.
2004-03-06 03:05:39 +00:00
61ba4636ab
+ update reachover host tools for xf4.4
2004-03-06 02:55:20 +00:00
ba6b26100c
+ the non-loadable version of libcfb.a needs cfbcmap.
2004-03-04 01:06:57 +00:00
2b884e11d4
+ cfbcmap.c is only for libcfb.a (8)
...
+ use correct cfbmodule.c's for 8,16,24,32 libcfb respectively.
Resolves (remaining?) problems with xf86cfg.
2004-03-03 16:11:45 +00:00
5df6f3ecad
Correct the defines to mfbbltO.c
...
xf86cfg can now load libxf1bpp.a
2004-03-03 14:32:53 +00:00
32fad750c1
+ put common CPPFLAGS in one file
...
+ add -DFONTMODULE -DMODNAME=${LIB} for xtt modules
+ add required include paths for FONTMODULE, MODNAME
Fix as per changes in pr by Kouichirou Hiratsuka
This should resolve pr#24032
2004-03-03 08:38:09 +00:00
0b1ca8966d
DEFAULTVT=vt05 to Xservers.ws generation for i386 only (as native does)
...
XXX should this be given vtXX for other MACHINE's?
should resolve pr#24619
2004-03-01 14:56:51 +00:00
29dc39116b
Always -UDDXTIME we'd get rid of it in source but native needs it.
2004-02-24 15:17:48 +00:00
e1bbf3c9e0
+ pre-build and install libexpat before lib/*
...
+ link libfontconfig w/ libexpat.
Should resolve pr#24527.
2004-02-23 05:47:47 +00:00
bf04b0ee5f
Enable Xhpc on hpcsh.
2004-02-22 18:30:34 +00:00
39401ac035
SRCS+= GetTimeInMillis.c for special combinations of XFree86 server is
...
being built with other servers.
2004-02-21 08:35:28 +00:00
36f1e88d93
MKMAN=no was there ever a Xmacppc.man?
2004-02-21 08:33:23 +00:00
12cdb6c3cf
move libos.a down in the link line so its version of GetTimeInMillis() is
...
not the one linked (instead we get the version from libxnest.a and libxvfb.a)
appropriately.
2004-02-21 08:32:34 +00:00
6b0d2196d3
Add sgimips as a valid XFree86 server target.
2004-02-21 01:51:43 +00:00
afb68f3457
compile correct path to 'Cards' file into xf86config
...
this is into response to (not so)recent post I can't find and should
resolve the described problem i.e. Cards file wasn't found.
2004-02-18 04:59:56 +00:00
f1d5c4b47a
Add cross build glue for cats.
2004-02-13 16:56:19 +00:00
756f7c1000
Xamiga needs FORCE_SEPARATE_PRIVATE.
2004-02-13 04:49:00 +00:00
d2b90882d5
generate usr/X11R6/man/whatis.db
2004-02-09 07:59:01 +00:00
78f3b1bf18
use uname=${BINOWN} gname=${BINGRP} instead of uname=root gname=wheel
2004-02-09 06:52:34 +00:00
d51a64d931
clean up temporary files
2004-02-09 05:58:24 +00:00
d8b3c89d68
consistently provide a tools/<tool>/Makefile.<tool> for inclusion
...
wherever the appropriate definitions are used throughout the tree
2004-02-09 04:30:05 +00:00
dfbe2402b8
fix dependency on xf86Build.h, and add some comments
2004-02-09 04:18:24 +00:00
dfdc761429
more explanation of the requirements
2004-02-09 00:47:16 +00:00
c3af380567
no need to determine XSERVERINCDIR here
2004-02-09 00:28:25 +00:00
96457165ec
add DPSRCS entry for .h file created with BUILDSYMLINKS
2004-02-09 00:25:05 +00:00
c874e04b84
* add xf86PciIds.h to DPSRCS to fix parallel make issue
...
* there's no need to find the .OBJDIR of this directory for includes
as -I. suffices.
2004-02-08 23:27:38 +00:00
7c22253779
remove ${STRINGS_FILES} explicitly (${.TARGET} changed)
2004-02-08 22:13:10 +00:00
0f8e01e903
When building multiple targets with a single series of commands
...
(e.g, a command builds multiple files), use a timestamp file for
synchronization so that "make -j" doesn't run those commands
multiple times in parallel which could result in data corruption.
2004-02-08 21:57:04 +00:00
70f9fd7e61
Build makestrs earlier.
...
This isn't strictly necessary for build requirements, but does serve
to highlight that makestrs & pswrap are both needed early in the build.
2004-02-08 21:53:53 +00:00
add50bbb4c
makestrs is used to generate files for the "includes" path, so it can't
...
rely upon ${DESTDIR}${X11INCDIR} being populated.
Fixes problem observed using make -j.
2004-02-08 21:52:30 +00:00
f38d4e7c68
remove stuff rtr did recently
2004-02-08 21:30:47 +00:00
7571144c87
add TNF copyright. remove unnecessary cruft
2004-02-08 21:25:09 +00:00
e620708b1d
add X -> Xdreamcast default symlink
2004-02-07 12:46:48 +00:00
0aed830d75
Xdreamcast now builds so turn it on.
2004-02-07 12:28:13 +00:00
2e1bb1e734
place a seconf libcfb on the link line after libcfb16.a since it refs
...
libcfb.a symbols. This lets Xdreamcast build.
2004-02-07 12:27:33 +00:00
cd87f297eb
+ Xdreamcast reachover, by default turned off.
...
+ sorting of various XSERVER_ entries in Makefiles
+ addition of Xpmax Xdreamcast Xmacppc XSERVER_ entries
+ consistent use of != "no" instead of == "yes" changes
2004-02-07 08:30:34 +00:00
8d125fd0e6
Cache XSERVERLIB determination in Makefile.serverlib rather than
...
in 111 separate places. Speeds up empty "cleandir" from 27.17s to 13.75s.
2004-02-07 06:52:04 +00:00
81ec90969f
Re add ${MAKESTRS} and ${GENMATYPES} targets with updated paths into objdir.
2004-02-07 05:47:19 +00:00
cb53a4d3d5
don't need .PATH here
2004-02-07 05:23:56 +00:00
ae158be0af
move gen_matypes to x11/tools as per discussion with lukem and request
...
in post http://mail-index.NetBSD.org/tech-x11/2004/02/04/0001.html
2004-02-07 04:19:29 +00:00
e062d16f1e
remove MAKESTRS target
2004-02-07 04:15:33 +00:00
1655ce4df5
Move host too makestrs to x11/tools as per discussion with lukem and
...
request in post http://mail-index.NetBSD.org/tech-x11/2004/02/04/0001.html
2004-02-07 04:02:01 +00:00
4d26570c37
Fix typo.
2004-02-06 16:41:28 +00:00
261537f309
only build xlibi18n if MKPIC != no.
2004-02-06 14:55:48 +00:00
5ce86a019f
use ${PRINTX11VERSION}
2004-02-06 11:58:56 +00:00
5680605b4d
check for ${X11SRCDIR.xc} instead of ${X11SRCDIR}; it's a bit more robust
2004-02-02 14:21:51 +00:00
3bffc7c9c8
Use
...
FILES+= SshAskpass.ad
FILESNAME_SshAskpass.ad=SshAskpass-default.ad
instead of
FILES+= SshAskpass-default.ad
because of an obscure bug with "make -j" where it doesn't find
SshAskpass-default.ad in the .PATH correctly, probably because
of the rule created for it from BUILDSYMLINKS by <bsd.files.mk>.
This is not the correct long-term solution, and is a temporary
workaround for PR 24020.
2004-01-29 01:00:42 +00:00
fe5ae52dea
+ print MACHINE not MACHINE_ARCH for OSNAME
...
+ add release to OSNAME
2004-01-26 05:14:13 +00:00
24e7e49ae8
Xamiga does not need NEED_SCREEN_REGIONS.
2004-01-25 05:20:02 +00:00
74e6f70b7d
+ No need to undefine -UXF86VIDMODE twice
...
+ No need to define XF86DRI since it's never defined to begin with
+ __GLX_ALIGN64 now defined globally in X11FLAGS.EXTENSION.
2004-01-25 02:19:38 +00:00
364a6162e7
define -DHAS_MTRR_BUILTIN -DUSE_I386_IOPL for x86_64
...
patch from njoly@pasteur.fr
also MACHINE == "amd64" -> MACHINE_ARCH == "x86_64"
should resolve pr#24204
2004-01-24 05:51:20 +00:00
ce45a55fc0
ensure $X11SRCDIR is set and exists (for the build target)
2004-01-23 23:03:23 +00:00
5377e93afc
don't bother installing XftConfig-OBSOLETE
2004-01-23 14:32:02 +00:00
0f0f0dce34
-lx86_64 if x86_64
2004-01-23 08:59:20 +00:00
099ae88634
x86_64 (amd64) link w/ libx86_64 where appropriate
2004-01-23 08:45:02 +00:00
e78cfba9ff
Add amd64 support.
2004-01-19 00:36:09 +00:00
9bd8d033a9
Don't bother installing:
...
./usr/X11R6/lib/X11/etc/sun.termcap
./usr/X11R6/lib/X11/etc/sun.terminfo
./usr/X11R6/lib/X11/etc/xterm.termcap
./usr/X11R6/lib/X11/etc/xterm.terminfo
2004-01-19 00:30:01 +00:00
3f64bae6d7
reachover for libamiga.a forgotten in Xamiga import
2004-01-18 05:36:19 +00:00
c3936a1977
+ Reachover for XdecNetBSD, XalphaNetBSD, Xarm32VIDC
...
XXX certain extensions should/should not be built and linked that are.
XXX X -> symlink defaults may not be appropriate.
2004-01-18 05:35:03 +00:00
462bd38713
SUBDIR.afb for Xamiga
2004-01-18 05:24:45 +00:00
67730f2e2d
add dependencies
2004-01-17 06:39:43 +00:00
fd3ecbad7e
add XSERVER_XAMIGA and XSERVER_HAS_AFB
2004-01-17 04:06:18 +00:00
3bea515962
Xamiga reachover
2004-01-17 04:03:26 +00:00
3c57e953ad
build libamiga.a if Xamiga
2004-01-17 03:56:25 +00:00
dd6e622644
NEED_SCREEN_REGIONS for Xamiga
2004-01-17 03:53:54 +00:00
8c37b5823c
amiga needs XINPUT for Xnest
2004-01-17 03:50:51 +00:00
3bae198909
add -DDARWIN_NO_CARBON to HOST_CPPFLAGS so that cross build
...
on darwin does not try to use resource fork font support
which requires the carbon libraries.
2004-01-15 13:47:05 +00:00
c173c06b42
Build & install XKB data files for the X680x0 keyboard.
...
Missing files in the previous.
2004-01-14 13:01:50 +00:00
786e145c78
Build & install XKB data files for the X680x0 keyboard.
2004-01-14 12:49:09 +00:00
lukem