> also need to strip out GCC 4.5's new .debug_pubtypes section.
> while here, minor cleanup.
XXX: probably we should have something like ${ARM_AOUT_REMOVE_SECTIONS}
XXX: in bsd.own.mk
netbsd.able-INSTALL.gz -> netbsd-INSTALL.ABLE.gz
netbsd.aout-INSTALL.gz -> netbsd-INSTALL.aout.gz
XXX: Probably it's simpler to have default ELF (currently ABLE) kernels
XXX: and optional a.out ones for old firmware as sgimips does for ecoff ones.
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never
catch on...
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat
Make them all choose the former. No functional change.
1) Removing chio, rcmd, restore, scsictl, shutdown and slattach
from the ramdisk images
2) Removing the isp* driver from the INSTALL kernel configs
3) Reducing the memory disk and ramdisk size back from 4400 to 4200 blocks
As a result, also remove mention as QLogic ISP controllers as being
supported by the installation.
With this, the INSTALL kernel images should once again be usable;
the firmware apparently imposes a size limit around 5MB on the files
it will load.
Longer-term, this port probably ought to get it's own stand-alone boot
loader, so that it might use e.g. loadable modules.
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.
call iso_image in distrib/ for iso-image in the top Makefile.
Use 38400 as the line speed, this is the default footbridge console speed,
changing it confuses a remote serial line. Also updated in dot.hdprofile
Change the BLOCKSIZE to 1k, and the default EDITOR to ed.
Add standin shell funcs for dmesg and grep.
Only run sysinst if it's actually in the image.
Most noticeable change is the addition of dhclient, we now prompt if the
user wants DHCP autoconfiguration.
Also added chio, rcmd, ping6, rtsol, scsictl
We now use the cut down versions of:
dhclient, ifconfig, ping, ping6 and route
The ramdisk has grown by about 200k, however the kernel can take that, we're
still a few 100k from the current 5MB limit for cats kernels.
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}
MDEXTRA_SUFFIXES.${KERNEL} -> MDSET.${FILENAME}.suffixes
${KERNEL.${_K}}.post -> MDSET.${FILENAME}.post
This allows "default" rules for for MDSETTARGETS with FILENAMEs of "-"
by defined MDSET.-.post & MDSET.-.suffixes
- Document the above
- Use the above appropriately in various Makefiles
- Be a be quieter when building these kernels
- Add .WAIT syncs so that multiple kernels aren't built in parallel, because
the temporary filename is the same, and it also avoid hairy magic in
syncing the targets generated from MDSET.${FILENAME}.suffixes with
the master target for that ${FILENAME}
