035bf3987f
make db_expr_t a long.
1997-03-01 09:50:16 +00:00
73ea4ca540
Document a non-obvious use of addr in interrupt().
1997-03-01 09:49:48 +00:00
799c3228ec
kgdb_connect and kgdb_panic are not define in the mi kgdb_stub.c. Define
...
them here.
1997-03-01 09:49:45 +00:00
63183795c0
imask[IPL_ZERO] was updated after recomputing the run masks for all the
...
interrupt handlers. Due to this
- DIAGNOSTIC kernels would panic
- check_sir would run with the interrupt registered last blocked
Credits for finding and fixing this go to Ian Dall.
1997-03-01 09:49:44 +00:00
597322b455
* Adapt to changed definition of struct db_variable.
...
* Some cosmetic changes.
1997-03-01 09:49:42 +00:00
453b47e7bb
removed. We now use the mi version from /sys/kern.
1997-03-01 09:49:20 +00:00
2de163471e
Minimal changes to adapt to removal of NCR5380_PERMIT_RESELECT.
...
This driver should be updated to allow per-target control over
disconnect/reselect, but I will leave that to the port masters.
1997-02-26 22:29:08 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
258699485f
add missing parentheses to assym.h rule.
1997-02-10 10:54:00 +00:00
9712aaf1b5
* clean:: -> clean: change.
1997-02-08 09:34:46 +00:00
f3cdc89574
* Use Phil Budne's full name in the copyright header.
...
* Define RECOVER to something faster.
* Check for a valid softc in scnsoft. When there is
a "hole" (e.g. you have scn0,scn1, scn4, scn5) the
old code would panic. Thank's to Phil Budne for
finding and fixing this bug.
1997-02-08 09:34:31 +00:00
f3ae5cdf29
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:34:12 +00:00
8a3b8c0477
* Fix a bug that would had cause an hang on fpuless machines.
1997-02-08 09:34:09 +00:00
8ec2fa0cfa
* Convert NetBSD/pc532 to use the new libkvm by stealing code
...
from the alpha port.
1997-02-08 09:34:06 +00:00
5a17e54866
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:34:01 +00:00
92842a6db7
* Remove some unused macros.
1997-02-08 09:33:58 +00:00
efea7eb83f
* Correctly format the NetBSD-Id string.
1997-02-08 09:33:55 +00:00
6f5bca455b
* Remove whitespaces from empty lines.
...
* Add (commented out) type and asmtype commands. asmtype will
be used to define the gcc constraint used to emit constants
and type will be used to define the type the constant should
get casted to before passing it to printf.
1997-02-08 09:33:52 +00:00
869f7f78fb
* Now that we use genassym.sh/genassym.cf this is no longer needed.
1997-02-08 09:33:50 +00:00
0e2fbfdbcd
* The rom monitor and the bootprogram might have another idea about unit
...
numbers then the kernel. Use some code stolen from the mvme68k port
to find the bootdevice.
1997-02-08 09:33:45 +00:00
ed7d482ddf
* Don't wildcard scn[0-7]. This will not work for holes (at the moment).
1997-02-08 09:33:28 +00:00
d90eb8ee1e
* Corrected rule for assym.h. In case genassym.sh fails assym.h
...
has to be removed and a non-zero exit value has to be provided
to make.
* Removed last references to genassym and genassym.o.
1997-02-08 09:33:27 +00:00
3eded68a05
* Added PFIL_HOOKS to make modloading of the ipf module possible.
...
* Aded UNION fs. The lkm doesn't work at the moment.
1997-02-08 09:33:24 +00:00
6224783740
* Added KMEMSTATS option to save some memory.
1997-02-08 09:33:22 +00:00
021ca50fe4
* Added INSECURE to allow modloads in multiuser mode.
...
* Added PFIL_HOOKS to make modloading of the ipf module possible.
1997-02-08 09:33:20 +00:00
64065fbba2
* Removed old and invalid comment.
...
* Added LKM, PFIL_HOOKS and NFSSERVER options.
* Added four ccd devices.
* Removed PLIP and NO_INLINE_SPLX options.
* Removed MFS, MSDOSFS, CD9660, FDESK, KERNFS and PROCFS filesystems
because they all are lkmable.
1997-02-08 09:33:17 +00:00
67c8bca33d
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:33:03 +00:00
8f1067c4d8
* Remove some unused macros.
1997-02-08 09:32:33 +00:00
1f7aefb0a1
* Declare bootdev and booted_device.
1997-02-08 09:32:30 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
a6befcbede
* clean, depend :: -> : change
...
* use genassym.sh to create assym.h
1997-02-01 09:23:02 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
0735d8d32e
Use new machine-independent setroot().
1997-01-31 01:57:51 +00:00
fcb565dde2
Adopt for new file system and root spec grammar.
1997-01-31 01:57:08 +00:00
1370131ffd
Add scripts and documentation for a new method to create assym.h files.
...
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.
1997-01-30 09:37:20 +00:00
7b40f5228e
"md" is declared in sys/conf/files, now.
1997-01-21 09:39:20 +00:00
b89a3425b7
Eliminate obsolete TIMEZONE and DST options.
...
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
1997-01-15 01:28:28 +00:00
27381f0aaf
* Add cdevsw entry for /dev/ipl.
1997-01-11 11:00:41 +00:00
47fe16475c
* Use confargs in probe and attach routines.
...
* Irq and address are now printed by mbprint.
1997-01-11 10:58:12 +00:00
072388d107
Device rename: `rd' => `md'
1997-01-01 23:04:58 +00:00
f750d179be
rename: ramdisk => md
1996-12-28 23:42:33 +00:00
603b61c3e0
rename: ramdisk => md
1996-12-28 23:22:07 +00:00
e16e1de8fd
* remove NKPDE, this was never used.
...
* add IV_MASK (new member of struct iv) and IV_SIZE (sizeof(struct iv)).
1996-12-28 09:15:27 +00:00
92a5d4d222
* We no longer have a scsi subdirectory. Remove it from the list of
...
directories in which get tag links.
1996-12-23 08:38:02 +00:00
2e7cb22267
* Use bcopy, not memcpy.
1996-12-23 08:37:55 +00:00
54e6abd9e7
* Remove __BROKEN_INDIRECT_CONFIG.
1996-12-23 08:37:43 +00:00
4bd938a998
* Remove IPL_NONE. This is no longer used.
...
* Add IPL_HIGH. Alias IPL_HIGH to IPL_RTTY
* Define splrtty (used by the scn driver).
* Add iv_level and iv_mask to struct iv. These define the IPL at
which the handler should run.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
1996-12-23 08:37:41 +00:00
b01c5dfbcb
* Define NKPDE_BASE, NKPDE_MAX and NKPDE_SCALE for boottime computation of
...
nkpde (From the i386 port).
1996-12-23 08:37:38 +00:00
b30b4f9fcf
* Define new sysctl variable "machdep.nkpde" (From the i386 port).
1996-12-23 08:37:37 +00:00
41cc99aa8c
* Rearange duart_info and add hwflags to store uart type (Ian Dall).
...
* Define SCN_RING_HIWAT and add sc_rbhiwat to scn_softc. When the
ringbuffer gets full up to this mark, rts gets asserted (Ian Dall).
* Add sc_rx_blocked to scn_softc. This is used to tell scnsoft that
rxinterrupts are blocked (Ian Dall).
1996-12-23 08:37:11 +00:00
2c7e970491
* Define the bits in MR0 for the SCC26C92 (Ian Dall).
...
* Define SCC26C92-only commands (Ian Dall).
1996-12-23 08:37:10 +00:00
b080d4fea0
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
All the following changes were provided by Ian Dall:
* Remove SCN_HSOFT. Now that the pc532's software interrupt system is running
from int14, this won't work anymore.
* Add code to detect uart type (SCN2681, SCC2692 or SCC26C92).
* Cleanup my RECOVER mess. Thank's to Ian Dall for reading the datasheet
and removing all the unnecessary RECOVERs.
* Cleanup scnrxintr.
* Implement scnhiwflow.
* Do not use automatic RTS. This and scnhiflow and some changes to the
interrupt system suggested by Ian fix the scn overrun problem at 57600
baud.
1996-12-23 08:37:07 +00:00
70597563c6
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Make transfersize configurable for input and output. Default the input
transfersize to 128 bytes. That way interrupts won't be disabled for more
then about 128us-256us for slow targets. This is necessary to prevent scn
fifo overruns. Cleanup the pdma code. Thank's to Ian Dall for these
changes.
1996-12-23 08:37:04 +00:00
c3f3bc0228
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
1996-12-23 08:37:02 +00:00
7736d33def
* membus is now called mainbus.
1996-12-23 08:36:43 +00:00
b6f24c53a9
* Use std.pc532.
...
* Remove obsolete options CONFIG_NEW and CON_BRK_PANIC.
1996-12-23 08:36:40 +00:00
a6953fcdd8
* membus is now called mainbus.
1996-12-23 08:36:37 +00:00
d949824775
* Use std.pc532.
...
* Make it work on 30mhz machines.
* Configure MSDOSFS, CD9660, KERNFS, NFSCLIENT and INET.
* Configure SCSI-cds, slip and ppp.
* Update for mi ramdisk driver.
1996-12-23 08:36:36 +00:00
bddb87af16
* Configure UNION and NULLFS. UNION doesn't seem to work as a lkm yet.
1996-12-23 08:36:33 +00:00
181cf4f705
* Use std.pc532.
...
* Make it work on 30mhz machines.
1996-12-23 08:36:31 +00:00
553486636e
* Define and use nkpde.
1996-12-23 08:36:11 +00:00
15e824377a
* Add code for CPU_NKPDE sysctl.
...
* Compute nkpde at boottime.
1996-12-23 08:36:08 +00:00
eb68ad8281
* Recode _interrupt to use IV_MASK.
1996-12-23 08:36:05 +00:00
99cc2dd46d
* Initialize IPL_HIGH's imask to 0xffffffff.
...
* Initialize iv_level for all interrupts.
* Protect the call to the sir-handler with splraise.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Compute iv_mask for all interrupts in intr_establish.
1996-12-23 08:36:02 +00:00
c1921b48eb
* intr_establish now takes *two* ipls. One at which the handler should run,
...
and one in which the interrupt should get blocked.
1996-12-23 08:36:00 +00:00
9d6e666ea7
* Rename membus to mainbus.
...
* Remove config_scan. Thank's to Chris G. Demetriou for providing patches.
1996-12-23 08:35:57 +00:00
26f6e45d39
Fix a typo: s/COPT/COPTS/
1996-12-22 19:14:14 +00:00
781cd59dd4
* Enlarge kernel virtual memory space. The pc532 kernel now runs at
...
0xf8000000. When the kernel was running at 0xfe000000, the INSTALL
kernel would not run on a 32mb machine.
1996-12-07 09:24:37 +00:00
96acdadef7
First step inn removing config_scan() and the hacks that gave devices
...
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
1996-12-05 00:13:47 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
9da5f60715
PROF -> GPROF
1996-11-30 02:48:57 +00:00
e756776636
* Fix cut and paste error.
1996-11-24 13:35:18 +00:00
901a1f3641
* Calibrate _delay for a 30mhz system if CPU30MHZ is defined.
...
* A few changes to _interrupt to support the new softint mechanism.
1996-11-24 13:35:15 +00:00
110e4e09ff
* Prototyping tweaks.
...
* Support for the new softint mechanism. Softints are now requested by
triggering an unused ICU hardware interrupt. The idea for this was
contributed by Phil Budne.
1996-11-24 13:35:12 +00:00
518b5e6ae5
* Prototyping tweaks.
1996-11-24 13:35:10 +00:00
0f6a4a93fd
* Rewrite of membusattach/membusscan/membusprint.
1996-11-24 13:35:08 +00:00
58dc92f52e
* Prototyping tweaks.
...
* Changes to support the new softint mechanism.
1996-11-24 13:34:45 +00:00
591a6794e2
* A few changes to support the new softint mechanism.
1996-11-24 13:34:44 +00:00
9f82b6d4d1
* New file. Defines the structure describing config arguments passed to
...
match/attach functions.
1996-11-24 13:34:42 +00:00
a0117d39dd
* Prototyping tweaks.
...
* Real probe code added.
* Duart info is now allocated only for devices that are present.
* Added IO-Recovery delays for 30mhz systems.
* Removed a few potential NULL-pointer references.
1996-11-24 13:32:53 +00:00
ee943634a8
* Prototyping tweaks.
1996-11-24 13:32:48 +00:00
e9d6e1a616
* New file. Defines config options and devices common to all pc532s.
1996-11-24 13:28:56 +00:00
63758fd99b
* Include to std.pc532 added.
1996-11-24 13:28:52 +00:00
16b48272c4
Define _BSD_CLOCKID_T_ and _BSD_TIMER_T_
1996-11-15 22:38:45 +00:00
10af6d961f
* We get bcopy from libkern.o now.
1996-11-07 07:34:02 +00:00
6ed1a51b35
* libkern.o already has bcopy.o. Link it in front of libsa.a.
1996-11-07 07:33:55 +00:00
a95805b41f
* Define the ALTENTRY macro.
1996-11-07 07:33:28 +00:00
ee011c080d
* The pc532 port is now using the mi ramdisk driver.
...
* Use the mi version of ns_cksum.
1996-11-07 07:32:29 +00:00
5ca00f7293
* Cosmetic changes.
1996-11-07 07:32:21 +00:00
5596cf17ea
* Cosmetic changes.
...
* Configure LKM support.
* Remove filesystems that are normally not used.
* Configure SCSI-uk driver.
1996-11-07 07:32:18 +00:00
93811ddf97
* Cosmetic changes.
...
* Only FFS is needed for the install kernel.
* Configure the console to 8N1 (that's what the pc532's rom monitor uses).
* The install kernel doesn't need to know about CDROM drives.
* Use the new mi ramdisk.
1996-11-07 07:32:13 +00:00
7a27370327
* Cosmetic changes.
...
* Configure only NFS, FFS and LFS filesystems. All other filesystems are
modloadable.
* Configure SCSI-uk driver.
1996-11-07 07:32:10 +00:00
bc9eccaebb
* Cosmetic changes.
...
* Configure SCSI-uk driver.
1996-11-07 07:32:07 +00:00
1b92fb966e
* bcopy and bzero are part of libkern now.
1996-11-07 07:31:20 +00:00
dbaaf5e560
* rd_attach_hook/rd_open_hook. Stolen from sun3/dev/rd_root.c
1996-11-07 07:21:00 +00:00
ddb9815a80
* We are using the mi ramdisk driver now.
1996-11-07 07:20:37 +00:00
4ae217f7fa
* We are using the mi ncr driver now.
1996-11-07 07:20:29 +00:00
df2a490d8f
* Not in use for a very long time.
1996-11-07 07:20:28 +00:00
cab14d3b2b
* ntoh is part of libkern now.
1996-11-07 07:18:27 +00:00
c1e3a7db8d
* This not different from netns/ns_cksum.c. Delete this copy.
1996-11-07 07:18:26 +00:00
f0d6340cba
* Tell the vm system that kerneltext is mapped readonly. Stolen from
...
atari/atari/machdep.c.
1996-11-07 07:18:23 +00:00
8ea6b5f65c
* Add ch, ss and uk devices.
...
* Make lkms work.
1996-11-07 07:18:21 +00:00
eead8b9100
* bcopy is part of libkern now.
1996-11-07 07:18:19 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
8738c57e61
* Phil Budne's is now integrated.
...
* Remote kerneldebugging with gdb works too.
1996-10-23 07:55:10 +00:00
2336fbd2c6
* Phil Budne's much improved scn driver.
1996-10-23 07:52:35 +00:00
e7e91939da
* Remove references to deleted files (oldncr.c, dp.c).
1996-10-23 07:50:03 +00:00
54eec4c697
* Add EXEC_SCRIPT and EXEC_AOUT.
1996-10-23 07:49:58 +00:00
0cdf2807ab
* KLONDIKE has only four serial lines.
...
* KLONDIKE has a ns381 installed.
* Add EXEC_SCRIPT and EXEC_AOUT.
* Enable ddb.
* Enable FDESC.
* Monitor speed is 9600 baud.
* Monitor speaks 8N1.
* Pin down devices on the SCSI-Bus.
* Configure vnd, bpfilter, ppp and tun.
1996-10-23 07:49:55 +00:00
45fe815542
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Remove lines commented out.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:54 +00:00
225801ae14
* New file; configuration for my second pc532.
1996-10-23 07:49:52 +00:00
414cbce393
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Use new options for to set the console baudrate and the default
tty mode.
* Include PPP_BSDCOMP and PPP_DEFLATE.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:49 +00:00
63d15a966d
* Sync with i386 version.
...
* Scratch ram for debugger stacks ends at VM_MIN_KERNEL_ADDRESS + 0x1000
and not at VM_MIN_KERNEL_ADDRESS + 0x2000.
1996-10-23 07:46:08 +00:00
e9a160096b
* Sync with i386 version.
1996-10-23 07:46:07 +00:00
4b2a039488
* configure() has to be declared void.
1996-10-23 07:46:04 +00:00
865930408c
* Do not include limits.h, use machine/limits.h.
1996-10-23 07:43:44 +00:00
897acfdcbb
* Do not include stddef.h.
...
* Add definition of offsetof.
1996-10-23 07:43:42 +00:00
1a81564477
* Declare reserve_dumppages and pmap_activate.
1996-10-23 07:30:57 +00:00
1731660b98
* Declare kvtop.
1996-10-23 07:30:54 +00:00
b12cf5890d
RCS id police.
1996-10-15 21:59:03 +00:00
e37692f04d
backout previous kprintf change
1996-10-13 03:29:05 +00:00
7c9b908394
use in_addr_t and in_port_t
1996-10-13 03:12:38 +00:00
848c9d8f02
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:39:22 +00:00
9176e41d88
* Pull over prototyping fixes from i386.
1996-10-09 07:45:28 +00:00
b43657168e
* Add prototypes.
...
* Add support for ddb and kgdb.
1996-10-09 07:45:25 +00:00
9d22d4d454
* Fix declaration of setconf.
1996-10-09 07:45:23 +00:00
85ddb3de03
* A few prototyping tweakes and deletion of unused variables.
...
(pulled over from i386).
1996-10-09 07:45:20 +00:00
e90bc618bd
* Support for ddb.
...
* New patchable variable maxphysmem to limit physical memory.
That's useful to simulate small machines for testing install
kernels.
* Make debugging crashdumps with gdb -k work.
* microtime is moved to clock.c.
* Reserve memory for symbol table when ddb is configured.
* Move checks for RB_KDB into consinit.
1996-10-09 07:45:17 +00:00
89a49bedc6
* Set _kernel_text to the correct value.
...
* Fix a typo in delay().
* Disable generation of profiling prologue for proc_trampoline,
sigcode, idle, handle_trap, flush_icache, svc and interrupt.
* A few tweaks to make kgdb and ddb work nicer.
1996-10-09 07:45:13 +00:00
560bd7e107
* New file for kgdb support.
1996-10-09 07:45:06 +00:00
9c3592a5ca
* Reduce softint latency.
...
* Pull over change from i386 to make statclock > (tty | net | bio).
1996-10-09 07:45:05 +00:00
1dceda47e0
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Remove things not used by NetBSD.
* Make stacktracebacks work better.
1996-10-09 07:45:03 +00:00
4484a4406d
* New file for routines common for kgdb and ddb support.
1996-10-09 07:45:00 +00:00
6f37f75ecb
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Move some functions shared with kgdb to db_memrw.c.
1996-10-09 07:44:59 +00:00
79ded0d7e1
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
1996-10-09 07:44:56 +00:00
afd88ad8ed
* Remove unused function spinwait.
...
* Add Phil Budne's microtime.
1996-10-09 07:44:54 +00:00
00695d93ae
* Now that ddb works, boot should set esym to the correct value...
1996-10-09 07:42:13 +00:00
483cff53cd
* Add the README file from Ian Dall's original distribution.
1996-10-09 07:40:45 +00:00
84b238b8eb
* Add files needed for kgdb and ddb.
...
* Delete (commented out) ntoh.s.
1996-10-09 07:34:42 +00:00
f0c2efd752
* Remove ncr_minphys. Simply use minphys.
...
* Protect interrupt code with splbio.
* Don't use intr_disable/intr_enable in the pdma routines.
1996-10-09 07:29:58 +00:00
f28c7ec9dd
* Don't use ansi c prototypes. Use the __P() macro.
...
* Support for bpf added.
* Don't duplicate code, use ether_ifattach instead.
* Recode plipreceive and pliptransmit in assembler.
This improves performance from 40 kbyte/s to 50 kbyte/s
between a 30mhz pc532 and a 25mhz i386.
1996-10-09 07:29:55 +00:00
f8c337b300
* Remove intr_disable/intr_enable stuff.
...
* Reduce softint latency.
1996-10-09 07:28:52 +00:00
f673492195
* redefine MAXPHYS to 128k to support DAT-tapes with a
...
very large blocksize.
1996-10-09 07:28:50 +00:00
b5542a0938
* The expression to which ICU_CLK_HZ is defined has to be
...
protected by parentheses.
1996-10-09 07:28:47 +00:00
0a6d52bb21
* Make it work for NetBSD (and not mach). Most of
...
this was done by Phil Budne.
* Delete unused macros.
* Define a few things to support kgdb.
1996-10-09 07:28:44 +00:00
b1bd20fbe2
* Delete define for DELAY.
...
* Add prototype for delay()
* Add prototypes for functions from various
machine dependent files.
1996-10-09 07:28:43 +00:00
1ebd4878ae
* Include profiling prologue not only when PROF is
...
defined but also when GPROF is defined.
* Provide _ENTRY and _ASENTRY to make it possible to
define functions that should not be profiled.
1996-10-09 07:28:40 +00:00
b83348353f
* ddb now works.
...
* Profiling works as well.
1996-10-09 07:21:47 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
b3ffba62a6
Move strip(1) flags into a separate variable, so that $STRIP can
...
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
e6dd44f034
Use SIGBUS iff we get a legitimate bus fault. Use SIGSEGV for page protection
...
violations (per Solaris, SVR4, AIX, Linux, Irix, and SunOS).
1996-09-07 22:26:41 +00:00
fc3def4096
Remove duplicate declarations of LKM functions and macros.
1996-09-05 15:46:22 +00:00
0a59726320
Fix obvious typo.
1996-09-02 12:42:11 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
30a617c634
Wrap the default definition of `S' in `.ifndef'.
1996-08-31 21:40:47 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
318585cf7f
Removal of some dead code. Moving of data definitions. (From Matthias)
1996-07-31 16:47:30 +00:00
99db994eea
Move to the MI ncr5380 driver.
1996-06-26 04:31:33 +00:00
af576d8a9f
no need for a local implementation of SIOCGIFMTU; delete it.
...
s/ifr_metric/ifr_mtu/ where appropriate (in SIOCSIFMTU code), since
MTU data no longer (loggically) stored in ifr_metric.
1996-06-13 21:51:53 +00:00
6c28c57a2a
xxcd => xx_cd.
1996-05-23 14:14:20 +00:00
386ecdc658
Prototype dk_establish.
1996-05-19 05:34:25 +00:00
8d6d309bf0
Minor fixes from Matthias Pfaller.
...
ncr.c => add parity disable code.
1996-05-19 05:32:09 +00:00
04241dc8eb
Add _kernel_text.
1996-05-17 16:38:24 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
ccc18dd2ae
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:12:53 +00:00
333943186d
Small tweeks from Matthias Pfaller.
1996-05-03 23:22:54 +00:00
0b85f48338
Updates from Matthias Pfaller and Ian Dall.
1996-05-03 23:19:26 +00:00
dba4d32f68
Initial check-in of the ieee fp support for the pc532.
...
ieee fp support by Ian Dall, NetBSD/pc532 integration by Matthias Pfaller.
Includes setjmp/longjmp added to locore.s.
1996-04-04 06:36:03 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
933d138841
Change %r -> %: as for recursive printf's
1996-03-30 21:01:21 +00:00
5f5484b74a
tweek to delay (locore.s) and to FPU trap handler(trap.c).
1996-03-28 05:00:06 +00:00
e7b9b54ea3
Remove __SWAP_BROKEN.
1996-03-28 04:53:17 +00:00
6d61867cc0
Remove old files not needed now that the pc532 uses the MI ncr5380 driver.
1996-03-28 04:49:32 +00:00
77abd102b7
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:38:52 +00:00
2ce5f1478b
Add _BSD_WINT_T_ definition so we can handle wint_t type added in NA1.
1996-03-16 01:31:45 +00:00
ab0e60a42f
fdopen -> filedescopen
1996-03-14 21:20:59 +00:00
a3448dcd3e
Update it.
1996-03-11 23:14:43 +00:00
509ba91070
have files.pc532 use include feature for scsi.
...
use MI ncr driver.
1996-03-11 23:09:09 +00:00
26ee503b71
More precise DELAY function.
1996-03-11 22:50:17 +00:00
6d5bf6a3ea
Support for move to MI ncr5380 driver.
1996-03-11 20:56:48 +00:00
d92d9aa2f7
Move the pc532 ncr5380 driver to the MI one.
1996-03-11 20:50:50 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
a3a96d6af3
Another tweek to support libcompat.
1996-02-15 20:19:48 +00:00
2afc843cce
change _insque and _remque to match the prototypes in sys/systm.h.
1996-02-15 08:39:27 +00:00
5e7b18feac
Catch up with changes in the libkern and libcompat get $S ...
...
Comment out ns_cksum.c.
1996-02-15 08:37:56 +00:00
b3666297b1
Oops, meant to delete the declaration completely.
1996-02-12 21:28:18 +00:00
a9996b4780
pmap_page_index returns int
1996-02-12 21:27:32 +00:00
bf49f190a7
change pmap_page_index to return int
1996-02-12 21:19:13 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
28eae27187
correct prototype for cpu_fork
1996-02-05 20:33:37 +00:00
matthias