Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
62,752 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

100 Commits

Author SHA1 Message Date
mycroft 8aeb8df354 Add a flag to tell whether a MAC address was actually found in the CIS. 
XXX This whole piece of code should go away ASAP.  We should use a callback
as in the PCMCIA code.  In fact, we should use the PCMCIA code...
 2000-04-02 19:11:37 +00:00
haya ddd36bd41a 1. Do not apply 5 V on a CardBus card. 
2. Do not avoid ISA hole when a device requires more than
   256-byte io space.
3. Remove sending CardBus bridge's function number to
   cardbus stack.  This number is not needed for anyone.
 2000-03-22 09:35:06 +00:00
thorpej ed332d840a In tlp_cardbus_detach(), only unmap the bus space if we were able to 
map it in the first place.  Pointed out by enami@netbsd.org.
 2000-03-22 01:35:14 +00:00
thorpej 8de21980d9 Fix logic bug in fxp_cardbus_match(). 2000-03-22 00:17:46 +00:00
thorpej 92c19e5ff7 Add suspend/resume hooks to ensure that the chip doesn't scramble memory 
after an APM suspend and is unsnoozed after an APM resume.
 2000-03-19 21:45:23 +00:00
enami 5336e37153 Make this file just compiles again. 
XXX Don't expect to work yet.  It fails even to link depending on your
XXX kernel config file.
 2000-03-16 03:06:51 +00:00
thorpej c38405d33d Add power management support to the `tlp' driver. The battery on my 
laptop lasts a whole lot longer now.
 2000-03-15 18:39:50 +00:00
fvdl 2da1f00fcd Update cardbus frontend for new ahc driver. 2000-03-15 02:03:51 +00:00
thorpej 297455cbe2 Pick I/O before Memory space. 2000-03-14 02:08:21 +00:00
soren 95054da1a1 Fix doubled 'the's in comments. 2000-03-13 23:52:25 +00:00
veego 347a1f736e Reverse the mapping of the control/status registers. Use I/O before MEM. 
My card works now on a TI1220 chipset. Approved by Jason.
 2000-03-12 17:05:23 +00:00
thorpej 7e044bd4e5 Move pretty much all of the PCI configuration goo into a separate 
function.
 2000-03-10 07:26:41 +00:00
thorpej 370bc1832b Normalize the copyright notice (TNF copyrights should *always* match 
the appropriate template), and run through indent.
 2000-03-10 07:11:47 +00:00
thorpej 0fef451485 Pull the code that take the Tulip out of powersave mode into a separate 
function.
 2000-03-10 06:55:09 +00:00
haya 4398e0bd07 Fix CardBus device number. Though CardBus device number should be 0, 
the value of bridge's function number was assigned to the device
number.
 2000-03-07 09:36:52 +00:00
thorpej 8f8714687b Reenable the code that clears SLEEP and SNOOZE from the CFDA register. 2000-03-07 01:08:47 +00:00
mycroft 4887635a10 A few things: 
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register.  We're really looking for the
  PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
 2000-03-07 00:43:36 +00:00
mycroft 8b13d21260 Do a CARDBUS_BM_ENABLE to be sure. 2000-03-07 00:32:52 +00:00
mycroft de8398315a Fix an obvious bug that caused I/O space to never be freed. 
Also, don't use rbus_space_free() directly.
 2000-03-07 00:31:46 +00:00
mycroft bcdcb370e5 Called the power function even for 5V cards. This at least gives the power 
a chance to stabilize before we frob the card.
 2000-03-07 00:30:57 +00:00
thorpej 54e0e80815 Cosmetic change. 2000-03-01 20:50:56 +00:00
thorpej 08483fcddc When unmapping these on detach, pass the BAR to unmap (not the type of 
the BAR!!)
 2000-03-01 20:50:37 +00:00
soren d282f771e7 Remove redundant CIS definitions. 2000-02-18 18:55:31 +00:00
enami 01868857df Add activate routine and check device active flag also in one second 
tick handler.
 2000-02-12 04:05:49 +00:00
joda d40e2b51ee add detach code 2000-02-09 22:15:57 +00:00
itohy 0a1d6b1357 Make it compile with options DEBUG. 
Reported by Kawamoto Yosihisa (PR #9379).
 2000-02-09 07:57:52 +00:00
augustss 494c9affea Support detach. 2000-02-05 18:11:55 +00:00
augustss e037c568cb Update for cardbus unmap changes. 2000-02-04 13:48:23 +00:00
augustss 1facb42e6e Make the driver work even if DIAGNOSTIC is not set. 2000-02-04 13:43:56 +00:00
haya ded26ac3e4 Now cardbus_mapreg_unmap() has been implemented in 
sys/dev/cardbus/cardbus_map.c.  The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
 2000-02-04 07:59:20 +00:00
thorpej 44a20a6c96 If we read a bad header signature, report what we read. 2000-02-03 06:47:31 +00:00
thorpej 001748dc57 First cut at detach support; doens't fully work yet. 2000-02-01 22:54:47 +00:00
haya 2e9b49c888 Force power off when a CardBus card is detached. 
Use tsleep when kernel thread works.
 2000-01-31 08:49:07 +00:00
haya 653eefc8f4 Add cardbus detach functionality. Add a function 
cardbus_detach_card() in cardbus.c and enable detach code in cardslot.c
 2000-01-26 09:04:59 +00:00
thorpej 422cc09430 First attempt at a CardBus front-end for the `ahc' driver. This will 
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.
 2000-01-26 06:37:23 +00:00
drochner 1f723151f2 use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the 
PCI BAR bit is referred to
 2000-01-25 22:32:20 +00:00
thorpej 701cc4b663 Add support for the Xircom X3201-3 in 21143 emulation mode. This chip 
appears on some Xircom and Intel RealPort(tm) cards.

From Rafal Boni, with some slight modifications from me.
 2000-01-25 21:50:30 +00:00
thorpej 6aca67041c Add a chip type for the Xircom X3201-3, and centralize the declaration 
of the chip names array.
 2000-01-25 19:29:17 +00:00
mycroft e33c595472 Do a CARDBUS_BM_ENABLE just to be sure. 2000-01-25 15:29:43 +00:00
thorpej be3c43687c Make sure the latency timer is set to a reasonable value. 
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
 2000-01-25 03:44:27 +00:00
thorpej 0c93dded4a Use config_pending. Addresses kern/9247. 2000-01-24 18:34:44 +00:00
joda de798768b3 (cardbus_attach_card): zero out ca 2000-01-13 10:27:31 +00:00
augustss 6b1620b095 Remove extra #endif so we can compile again. 1999-12-17 14:06:43 +00:00
abs 43838a47fd Add back cut Cardbus_conf_write/cardbus_conf_write lines. 1999-12-16 21:04:10 +00:00
kleink 2fd74b0fb4 Normalize symbol names used for multiple inclusion protection. 1999-12-15 12:28:54 +00:00
thorpej 014cd3fcc1 Take a stab at making this work on big-endian systems. 1999-12-12 17:46:36 +00:00
explorer 4313f463a0 add 3com 575CT, which Dell (at least) seems to be shipping 1999-12-11 22:22:34 +00:00
thorpej d4bb1032cb Handle the 21143 PMCSR, like we do in the PCI front-end. 1999-12-11 00:39:13 +00:00
thorpej caae0e1aa1 - Don't try to run the chip in big-endian mode. Not all chips support 
this consistently, and it doesn't always work even when the chip
  supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
  little-endian mode.
 1999-12-11 00:32:59 +00:00
thorpej 085bc011ab Add cardbus_get_capability(), cloned from pci_get_capability(). 1999-12-11 00:29:11 +00:00