f05698506a
Add man page for mppb(4) - Prometheus PCI driver
2011-09-17 17:04:22 +00:00
b8647b8e93
Update list of algorithm identifiers available in opencrypto(9).
2011-09-16 22:27:36 +00:00
a7e54c8724
Case fixes and a comma from Snader_LB.
2011-09-13 10:33:11 +00:00
c7e46fd216
Add missing s, from Snader_LB.
2011-09-13 09:16:00 +00:00
adb6017bcb
Describe options and arguments. Bump PKGREVISION.
...
Based on PR 45275 by Julian Fagir.
2011-09-08 19:55:52 +00:00
046448eac0
Remove duplicate word.
2011-09-07 08:54:41 +00:00
43a361ba82
regen for "-u" option and dtv device.
2011-09-06 10:27:07 +00:00
9b960ee0a3
Document AUDIO_ENCODING_AC3
2011-09-06 01:17:48 +00:00
7915776d56
Remove trailing whitespace.
2011-09-05 18:21:29 +00:00
7add4c1ae4
Update vmem(9). Changes to the implementation and usage are following,
...
soon.
2011-09-02 22:07:33 +00:00
afc7891098
Minor correction.
2011-08-31 07:04:49 +00:00
456ace79d6
Use more .Nm, offset indent.
2011-08-30 11:24:38 +00:00
a356035768
Also mention gpioiic(4).
2011-08-30 07:44:37 +00:00
1a007af9ac
Clarify that the ATI USB dongle uses XC3028L (and not XC3028).
2011-08-30 07:27:59 +00:00
44d221d650
Remove trailing comma.
2011-08-30 07:24:01 +00:00
d9f0aab6fe
Xref au8522(4) and xc5k(4) in the list of supported cards.
2011-08-30 07:23:05 +00:00
7559e70f68
Note emdtv(4).
2011-08-30 07:08:47 +00:00
82f9e3ab66
Install the emdtv(4) manual page, based on earlier feedback from jmcneill@
...
(includes some XXX comments; should be updated alongside with the driver).
Also use the new dtviic(4) links to build a list of supported cards.
2011-08-30 07:07:04 +00:00
6cc2dbf4e8
Fix bug (also analog tuners are included in the group).
2011-08-30 06:51:27 +00:00
75e227598a
Sort SEE ALSO.
2011-08-30 06:27:17 +00:00
bd1a818de3
Deprecate the tuner(4) page (link to bktr(4)), as the name is too general
...
and nowadays misleading.
2011-08-30 05:59:44 +00:00
d479d073dc
Note that bktr(4) is not part of the dtv(4) infrastructure.
...
XXX: This driver should be converted (or even bluntly removed, given the
lack of general third-party software support).
2011-08-30 05:58:02 +00:00
64e115ab33
Xref dtviic(4).
2011-08-30 05:43:30 +00:00
d70d1fad57
Fix .Nm.
2011-08-30 05:41:04 +00:00
b6256a2ee9
As discussed with wiz@ and jmcneill@, move the dtvi2c(4) page to dtviic(4)
...
(to match iic(4)) and install it by default. Also, and in particular, build
and install MLINKS for all supported demodulators and tuners.
2011-08-30 05:40:38 +00:00
040d653091
Be more precise for Xen dom0: either Ctrl + Alt + Esc, or +++++ when on
...
serial console.
Thanks to Christoph and Manuel for pointing that out.
2011-08-29 22:01:47 +00:00
e5ce0ad0c8
Fix prologue macros order.
2011-08-29 16:56:32 +00:00
eedc15b4ff
Some improvements.
2011-08-29 15:35:29 +00:00
b3638dac15
Some fixes from Jared, add zl10353, update AUTHORS.
2011-08-29 13:42:53 +00:00
389b587089
Xref auvitek(4) also in SEE ALSO (and the others as comments).
2011-08-29 11:23:53 +00:00
4384aaccea
Install the dtv(4) manual page. (The stub man-pages are commented out ATM.)
2011-08-29 10:48:57 +00:00
607caaa5f0
Fix xref-typo in the previous.
2011-08-29 10:43:52 +00:00
b6d372f02c
Various improvements; e.g. primarily speak about DTV (i.e. DVB is just a
...
standard), split out SUPPORTED DEVICES from SEE ALSO, improve grammar, fix
references, speak about interface instead of device, fix AUTHORS, etc.
2011-08-29 10:41:10 +00:00
1751c709ef
Be more precise for Xen: +++++ is only valid for Xen domUs. dom0 uses
...
the same key sequences as i386/amd64.
2011-08-28 22:09:36 +00:00
92ced822d1
Add a new ioctl, GPIOPULSE to gpio(4) to allow for pulsing a pin.
...
If a pin can pulse in hardware, that will be used, else it will
be pulsed in software. There is no way yet to set the pulse frequency
for pins that pulse in hardware. While here, make the code mpsafe and
allow more than one thread in the driver (access to ioctl is serialized).
2011-08-28 07:48:50 +00:00
0aa57dbb94
add new arp logging sysctls
2011-08-27 09:06:58 +00:00
9c77eacafa
add some info re use of Modem and Network ports
2011-08-26 07:56:00 +00:00
7d12941ccd
Describe pci_bus_devorder(9).
...
TBD: symbolic link pci_bus_devorder.9 -> pci.9.
2011-08-25 02:01:32 +00:00
098681c432
Bump date for previous.
2011-08-23 22:14:51 +00:00
64311e1f9d
Introduce a couple of new constants, VMEM_ADDR_MIN (the least possible
...
address in a vmem(9) arena, 0) and VMEM_ADDR_MAX (the maximum possible
address, currently 0xFFFFFFFF). Modify several boundary conditions so
that a vmem(9) arena can allocate ranges including VMEM_ADDR_MAX.
Update documentation and tests.
These changes pass the tests in sys/kern/subr_vmem.c. To compile the
and run the test program, run "cd sys/kern/ && gcc -DVMEM_SANITY -o
subr_vmem ./subr_vmem.c && ./subr_vmem".
2011-08-23 22:00:57 +00:00
ce24bfd93f
Until someone figures out a fix for PR 40599, document that MKKERBEROS=no
...
will break the system without either MKPAM=no or a customized PAM config.
As suggested by Ian D. Leroux on current-users and in PR 45263, but with
different text.
2011-08-22 02:37:15 +00:00
7b18fe3c86
New sentence, new line.
2011-08-21 13:27:45 +00:00
70f971ae4d
SEE ALSO resolvconf(8)
2011-08-21 11:04:21 +00:00
844442797e
Attach amdtemp(4) at pchb(4) instead of in place of pchb(4).
...
Should fix PR#45268.
2011-08-18 20:55:20 +00:00
b426708f05
Mention two packages making use of the API. From jmcneill.
2011-08-14 20:42:09 +00:00
1e58891abf
Install irmce(4) after review by jmcneill.
...
Sort set lists while there.
2011-08-14 16:11:15 +00:00
7bdb95632e
Add very preliminary dtvi2c(4) man page for describing the dtv(4) support
...
modules connected via i2c.
Needs heavy reviewing before it can be installed :)
2011-08-14 16:04:12 +00:00
3f109f954a
Very basic dtv(4) man page for review (not hooked in yet).
2011-08-14 15:36:35 +00:00
8e8649fda9
Add AUTHORS section.
2011-08-14 15:21:46 +00:00
4c8535b2e4
emdtv was written by jmcneill.
2011-08-14 15:21:01 +00:00
rkujawa