status from 10 seconds to 250 milli seconds for the second and subsequent
attempts to determine the link status. This prevents unnecessary long
stalls after the device attach routines have completed.
Tested on a dual port QLogic 3212. Approved by mjacob@feral.com.
http://mail-index.netbsd.org/tech-kern/2003/09/25/0007.html
We now have:
acardide* at pci? dev ? function ? # Acard IDE controllers
aceride* at pci? dev ? function ? # Acer Lab IDE controllers
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
cypide* at pci? dev ? function ? # Cypress IDE controllers
hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
optiide* at pci? dev ? function ? # Opti IDE controllers
piixide* at pci? dev ? function ? # Intel IDE controllers
pdcide* at pci? dev ? function ? # Promise IDE controllers
siside* at pci? dev ? function ? # SiS IDE controllers
slide* at pci? dev ? function ? # Symphony Labs IDE controllers
viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
serverworks driver not commited yet; there are still copyright issues about
it.
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
When probing a nonexistent slave, we may timeout waiting for an interrupt.
In __wdccommand_start(), for polled data in commands, abort quickly if
status still read 0 after 400ns (for a nonexistant slave, the
command will either be aborted, or the status register will report 0; for
a real device we should have BSY, DRQ or ERR).
Thanks to Alexander Yurchenko for reporting the problem and testing the
fix.
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
* Implement read for ulpt.
* If the device is not opened for reading, occasionally drain any
data the printer might have (but don't hammer the printer with reads).
* Lower the buffer size to one page.
The driver seems to work with more printers now.
>- Move PMAGB-BA and PMAG-JA (which I have) out of "may be incorrect" entries.
>- Put driver name "tfb" for PMAG-JA (which will appear in future pmax-wscons).
removing assumptions that there are only two B channels and by
adding support for a varying number of channels.
Due to this, rename previously used isdn identified "bri" to "isdnif",
which better describes the current situation.
* auich_calibrate() assumes that the AC97 part is in its reset state. To
ensure this, call audio_attach_mi() after auich_calibrate().
* Explicitly support 12000Hz and 24000Hz. (Why is there a discrete list at
all?)
* Fix an obvious recording bug -- we were acking the wrong interrupt.
* Ensure that we don't get an interrupt during the AC97 speed probe by clearing
the "interrupt on completion" bit in the DMA setup.
* Separate the code to set the default parameters into a new function,
audio_set_defaults(). Make it use audiosetinfo(), which properly initializes
the block size and whatnot. Use this in both audioattach() and the
/dev/audio case of audio_open().
* Do not force a reinitialization when /dev/sound is opened.
* Do all of the block size sanity checks in auto_init_ringbuffer(), not in
both audio_calc_blksize() and audiosetinfo().
* Fix a bug in audiosetinfo() that caused the block size to not be recalculated
immediately if we set it to 0.
* For AUDIO_GET[IO]OFFS, modify the deltablks calculation so that it gives us
the number of block boundaries crossed.
interface controllers (of varying intelligence levels).
Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford,
with some modification by me.
to pci_attach_args. The latter is allocated on the stack during auto-
configuration and so will not be valid after that time.
It's amazing how the old code worked for so long. I guess pci_attach_args
is allocated deep in pid#0's kernel stack on most platforms.
fit in the number of bits used for the port still does something.
This fixes PR pkg/18741 for ac97-based hardware. Other audio drivers
might need a similar fix.
