1a546b9c98
Zap proginstall and scriptinstall - they don't make sense for hostprog.
1999-09-24 17:48:57 +00:00
9229eeaa2b
Add KMOD_LOADFLAGS to the load target. With this, lkm's in /sys/lkm/... can
...
more readily depend on each other.
An lkm which depends on another lkm now only needs to set
KMOD_LOADFLAGS= -A../../path/to/other/lkm's/${KMOD}
and the lkm will link against the other lkm's symbols. Obviously the other
lkm had better be loaded. ;-) Note: the -A option to modload was pre-
existing. This change makes it possible for users of this file to take
advantage of it.
1999-09-22 18:06:21 +00:00
eabdb3b0c8
Define CONFIG, so it can be overridden for cross-builds.
1999-09-16 00:28:31 +00:00
9ad44ce879
Add a "dependall" target, which does a "make depend" and then "make all"
...
in a single directory. This is useful in "make build" because by doing
the build immediately after the depend, all sources will typically
still be in the buffer cache, thus saving significant time over doing
a "make depend" on all the directories and then a "make all".
1999-09-14 01:31:11 +00:00
21eedb0ec1
the PMAP_NEW option is gone as the new interface is no longer optional.
1999-09-12 01:19:23 +00:00
3d2671a09d
sort the object file build so that we get better buffer cache behavior.
...
[from perry, with fixes from me]
1999-09-12 00:31:34 +00:00
1008436afc
Permit "make all install", as well as "make foo install" (where foo would be
...
installed by "make install") without setting of BUILD. All cases where BUILD
is already set are unchanged from the old behavior.
"make all install" is now practically equivalent to "make BUILD= all install",
but without actually setting build.
Fixes pr's 8313, 3894.
1999-09-04 21:48:33 +00:00
bb0106aee8
When test(1)ing for a symlink, use the -h primitive instead of -L. Although
...
the latter is supported in our test(1), the former is more portable, and is
defined in 1003.2bD3 and SVID4. Addresses PR kern/8225 from Andrew Cagney.
1999-08-22 14:02:34 +00:00
62ea23a965
Add OBJCOPY
1999-08-21 14:17:07 +00:00
c31f7f0416
Document the UNPRIVILEGED make variable.
1999-08-21 06:19:33 +00:00
7987e3b34d
Add ${INSTPRIV} to ${INSTALL} commands.
1999-08-21 06:17:45 +00:00
f9bc9307df
If UNPRIVILEGED is defined, set ${INSTPRIV} to -U. Passed to install(1)
...
so that it doesn't try to set the user or group of the destination
file(s).
1999-08-21 06:16:21 +00:00
e09aca5470
Use (if defined) instead of obj.foo or obj
...
when building object directories
1999-08-21 00:41:41 +00:00
22066837c7
Make -r the default for RENAME, as per discussion on tech-install.
1999-08-16 13:57:03 +00:00
d5c8aa5ff2
correct previous fix:
...
- add CLEANDEPEND variable for stuff which should be cleaned out
in "cleandepend" phase.
- add it to the files removed during the cleandepend phase.
1999-08-11 02:00:15 +00:00
30c19fc81a
update CRYPTO example to use ".sinclude"
1999-07-26 02:01:47 +00:00
6703225f00
Add bsd.hostprog.mk, a makefile for making programs used during
...
the build which will run on the build machine.
1999-07-14 20:20:05 +00:00
5b112fce77
Re-arrange location of "-nostdlib" in DESTDIR case so that cross-ld's
...
won't name the output file "stdlib".
1999-07-14 20:18:07 +00:00
c410486d29
Document bsd.crypto.mk, and update the OBJECT_FMT entry.
1999-07-13 17:58:42 +00:00
c3de1759c7
Install bsd.crypto.mk.
1999-07-12 22:06:25 +00:00
f77d35e72c
Makefile fragment used to determine the path to crypto code in the
...
source tree. Allows CRYPTOBASE to be set in mk.conf or environment.
If it's not set, it searches for: crypto-us, crypto-intl in that order.
Setting CRYPTOBASE to none forces a no-crypto build. EXPORTABLE_SYSTEM
is supported for backwards-compatibility.
Will be used in a forthcoming mega-commit which significantly improves
the build process when building a crypto-enabled system, and allows
for the international crypto sub-tree to be seamlessly integrated into
the build process.
1999-07-11 20:17:01 +00:00
63eda1d356
Introduce a second level of WARNS for even more paranoia
1999-07-08 01:55:38 +00:00
454190a76b
Switch the i386 port to ELF.
1999-07-05 09:13:04 +00:00
5e4f18efbb
add LIBIPSEC for use from DPADD.
1999-07-01 20:19:18 +00:00
3128e0f6f9
Remove the NOPROFILE=1 for powerpc
1999-06-26 20:04:49 +00:00
04d4cbe3af
Oops, PWD is really something else in most environments.
...
Call this variable PAWD instead.
1999-06-10 20:48:28 +00:00
4d8eb5755d
Fix a typo which caused "make obj" to try to *execute* the direcroty it was in.
1999-06-10 20:34:26 +00:00
3a3605e823
Use ${SHLIB_VERSION_FILE} as the location of the shared library version
...
file. Pass this to checkver with the new -v option as well.
1999-06-10 00:40:05 +00:00
d73a6ae1d3
Conditionally define SHLIB_VERSION_FILE as ${.CURDIR}/shlib_version .
1999-06-10 00:38:49 +00:00
674c377f8f
Allow "make obj" to work nicely with amd by setting
...
PWD=/usr/bin/pawd in /etc/mk.conf and using the amd
mount point path for BSDSRCDIR.
1999-06-08 18:28:38 +00:00
11cfd21df0
Don't strip symbols if -g is specified. We might want to be able to debug
...
libraries!
1999-06-07 01:37:00 +00:00
8d77b5ba4b
Switch the sparc to ELF.
1999-06-06 09:25:38 +00:00
195a593eae
Fix thinko to make MKINFO=no work again. Closes PRs 7342 and 7411.
1999-04-22 01:06:42 +00:00
654297170f
Use -Tascii for pre-generated man pages, to avoid some nroff character set
...
magick.
1999-04-16 18:56:19 +00:00
e1134b1863
Patched per PR 7283; this causes shared libraries which depend on
...
other shared libraries to load against the ones just built when
DESTDIR is set (i.e. -L${DESTDIR}${LIBDIR} ), rather than what's
installed in /usr/lib (previous behavior definitely violated the
Principle of Least Astonishment!).
1999-03-30 09:30:43 +00:00
3064c4ddcd
alpha seems to work with -O2...
1999-03-10 14:06:14 +00:00
88fbb254d4
If it exists, include machine/Makefile.inc
1999-03-10 06:34:19 +00:00
303e8a33d5
Change CFLAGS to AFLAGS for mkdep of .S/.s files. Fixes "make depend"
...
on pmax kernels (and doesn't break "make depend" on entire tree).
1999-02-24 22:04:15 +00:00
cf3c9d73cd
add missing parts of the "mips"->"mipse?" transition
1999-02-24 14:42:36 +00:00
7054064487
Add sparc/elf bits.
1999-02-14 19:12:09 +00:00
26bef09099
Don't attempt to build catpages when MKMAN == no
1999-02-13 16:34:39 +00:00
6077e7c1f5
don't bother supporting NOINFO (since it's a new thing); just support MKINFO=no
...
fix description of MKSHARE=no
1999-02-13 03:04:09 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
899feeac30
Add doc for bsd.info.mk, and move the description of MKLINKLIB to the
...
bsd.lib.mk section (it should NEVER be set by mk.conf).
1999-02-12 15:10:22 +00:00
f727f277a7
Add {MK,NO}INFO, and use that to control generation/installation of Info
...
documentation. MKINFO=no is implied by MKSHARE=no.
1999-02-12 15:01:08 +00:00
41510f9a2b
for MKSHARE=no, set MKDOC=no MKMAN=no MKNLS=no, and for MKMAN=no, set
...
MKCATPAGES=no. this simplifies various tests.
1999-02-12 12:38:44 +00:00
13814c4ffb
pull in bsd.own.mk for MKOBJ
1999-02-12 04:13:26 +00:00
497d11782a
* Add support for MKDOC MKLINKLIB MKLINT MKMAN MKNLS MKOBJ MKPIC MKPICINSTALL
...
MKPROFILE MKSHARE, which default to `yes' unless an equivalent NOxxx
variable is defined.
* Add MKCATPAGES, which if "no" prevents catpages from being built or installed
Users should use "MKxxx=no" instead of "NOxxx=" in /etc/mk.conf, because
this allows easy override on the make(1) command line (e.g 'make MKSHARE=yes'
to override MKSHARE=no in /etc/mk.conf).
1999-02-12 01:10:06 +00:00
3d13884e75
I wish they'd settle on a file extension. Build Info files for any of
...
.txi, .texi, or .texinfo.
1999-02-11 16:50:46 +00:00
8baaaf2b4d
Clean on "cleandir" and "distclean", not "realclean".
...
XXX those clean targets should be unified and depend on a common name,
including that "distclean" should invoke "realclean".
1999-02-11 16:09:21 +00:00
wrstuden