e60403a3f9
Remove rz/tz support for pmax, switch to MI SCSI.
2001-08-26 11:55:38 +00:00
97ff24357e
Clean this up so it works again.
2001-08-26 05:31:28 +00:00
a826a2ecf0
clean up a bit; also fix a snap_pre_md segment to be in snap_md_pre so it is actually executed.
2001-08-23 16:01:56 +00:00
5b9869d189
don't clobber INSTALLATION_DIRS, just add to it. add support for building
...
32 bit libraries, crt and ld.elf_so on 64 bit platforms (disabled by default).
2001-08-23 14:40:21 +00:00
31be837848
support kernel configs called `../../sparc64/conf/GENERIC32', and the like,
...
by stripping the dirname off by using ${configfile:C/.*\///} where necessary.
2001-08-23 14:37:02 +00:00
8624e48221
Add /usr/share/man/{cat,man}8/netwinder.
2001-08-23 01:35:36 +00:00
44c7bc97b4
Add some etc.netwinder support for netwinder. XXX Far from complete
...
but makes snapshots possible.
2001-08-22 18:34:48 +00:00
4f36ab62b6
chown user.group -> chown user:group
...
according to cvs log of basesrc/etc/etc.sun3/ttyaction and
archive of source-changes, it was backed out with MAKEDEV
because of portability issue.
but i think ttyaction doesn't have that issue as it's never
executed on non-NetBSD environment.
2001-08-21 15:16:59 +00:00
bf0195348a
the installation directory is called miniroot not xminiroot.
2001-08-19 14:18:39 +00:00
e74599e179
Make newsyslog at boot optional, as it should have been.
2001-08-18 19:50:19 +00:00
8d6595d978
Add /usr/share/man/{man,cat}4/sun2
2001-08-17 07:15:12 +00:00
e2773e5d61
run fsck with "-n -f" instead of just "-n"; recent changes to fsck
...
mean that file systems mounted read-write are skipped unless -f is given.
problem noted by andrew brown.
2001-08-09 15:30:30 +00:00
ed97fbd98d
create /var/named 0755 root:wheel instead of 0750 root:named
2001-08-09 01:32:46 +00:00
799202c512
Fix botched commit (a conflict was committed).
2001-08-05 03:37:37 +00:00
e6b1a09d07
Use "mtree -U" instead of "mtree -u" on making distrib-dirs
...
to ignore file hierarchy unmatches and check exit status of mtree
to detect actual errors on it (like "unknown user/group" etc).
2001-08-04 18:41:18 +00:00
d472541074
And add sshdconf here too. Christ there are alot of files to update.
2001-08-02 05:47:59 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
d2b1c33dc5
Undo last: glob(3) isn't used for _whatdb (yet?).
...
[broke e.g. installation of devel/netcdf]
2001-07-29 15:50:29 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
5241fef795
add INSTALL_PS2 to BUILD_KERNELS
2001-07-21 13:38:22 +00:00
9d85345191
Build an INSTALL kernel too.
2001-07-21 05:58:28 +00:00
b8927f0fc1
Renumbered the minors on the tty devices now that
...
the keyboard and mouse are on ttys now.
2001-07-13 03:24:49 +00:00
458d1a2516
After itojun's recent RTF_CLONED and other changes, it's not necessary to
...
add a route from an alias address to 127.0.0.1, so remove that code.
It's still necessary to configure lo0 -> 127.0.0.1 though, so emphasize that.
2001-07-08 07:16:00 +00:00
c7ba90b340
Don't list uk twice.
2001-07-06 07:45:47 +00:00
3543e0f5fa
Start "ipmon" with option "D" for daemon mode instead of starting it
...
in a subshell.
2001-07-05 05:26:57 +00:00
b53f2df0b2
add AFS services, mostly from IANA
2001-07-02 16:07:04 +00:00
c46620e9a9
take advantage of glob(3) support when defining _whatdb
2001-06-25 21:38:29 +00:00
797097c7d1
Another place where primes was used. Change it to moduli.
2001-06-24 17:28:05 +00:00
ca02da9f00
pim6dd.conf is gone. primes -> moduli (openssh)
2001-06-23 22:07:06 +00:00
6a7dd372b3
Do what we should have been doing long ago; use /dev/console by default as the
...
boot console tty, so that the console is on the same place that the kernel
dmesg output goes, whether wscons or serial. Users who want to use tty00
or ttyE0 explicitly can change /etc/ttys themselves.
Also use "vt100" as terminal type for /dev/console (for a reasonable baseline
that also works with wscons; pccons is long since no longer default).
This addresses PR install/13249, i386-specific, but may be appropriate to
apply to all ports.
2001-06-19 20:06:46 +00:00
684e89f355
use mktemp(1) to create temporary directories, and ensure that cleanup traps
...
are setup asap.
2001-06-18 10:54:02 +00:00
50aa483991
Improve run_rc_script():
...
- Skip files that end with `~', `#', `.OLD' or `.orig', as these are usually
scratch or backup files created by programs, and we don't want to start them.
- Only try and run non `.sh' files if they're executable.
Per discussions with Andrew Brown, and closing his PR [bin/9981].
2001-06-18 06:53:45 +00:00
f27a0c8f42
Now that "fsck -p" skips file systems that are mounted read-write,
...
always perform the disk check (unless /fastboot exists). Previously
this would only occur when booting directly to multi-user, so the
fsck wouldn't happen after a single user boot going into multi-user.
2001-06-18 06:42:35 +00:00
e3dc57afeb
Make also ed1 for 'all', create ed0, ed1 for 'floppy'
2001-06-17 11:48:09 +00:00
d7d9b87b1c
Complain if $amd_master is set. This variable was used in 1.5 and prior
...
releases, but has been ignored since an am-utils update six months ago.
This fixes [misc/11971] submitted by Jun-ichiro itojun Hagino. (Note that
$amd_flags is still supported, contrary to what the PR says).
2001-06-17 01:05:40 +00:00
919eb089e2
change mountd to use its own $mountd variable (instead of $nfs_server).
...
nfsd will complain if mountd isn't set. from [misc/13135] by Johnny C. Lam.
2001-06-16 06:13:09 +00:00
586521f84e
- Implement an optional global watchdog timeout for rc.shutdown, which is
...
enabled by setting $rcshutdown_timeout to a number of seconds to wait for
before terminating rc.shutdown. This is disabled by default.
- Use symbolic names rather than numbers when defining a trap.
- Improve some comments.
2001-06-16 04:09:19 +00:00
bd7fad6c47
use symbolic signal names instead of numbers
2001-06-14 07:50:06 +00:00
a0a111aa26
Add support files for the Walnut.
2001-06-13 15:13:24 +00:00
d201b0b96b
Add support files for the Walnut.
2001-06-13 14:53:29 +00:00
ecc1e181a0
Checking support for fcom to arm32 MAKEDEV, fixes pr 11076.
2001-06-10 22:07:23 +00:00
68536ce2c4
Fix arm32 MAKEDEV, the script for handling ttyv had a typo.
2001-06-10 22:05:44 +00:00
a81dea8eca
Remove duplicate usr/share/man/cat8/news68k added in revision 1.159...
2001-06-08 21:16:15 +00:00
8966f5524c
not usr/share/man/cat8/new68k but usr/share/man/cat8/news68k
2001-06-08 21:13:23 +00:00
a35d0a5c89
Add missign directory "./usr/share/man/cat8/news68k".
2001-06-08 16:45:37 +00:00
5fc8a3a2c4
Remove empty sections (confuse MAKEDEV2manpage)
2001-06-08 14:43:20 +00:00
cffe2f2fdb
Add some more arch-specific man8/cat8 subdirs.
2001-06-08 14:24:44 +00:00
ed9cc9d27c
scsi(4), not scsi(8)
2001-06-08 14:17:41 +00:00
c9d0f70329
Fix typoe in Jason's last change.
2001-06-08 01:34:36 +00:00
17207724f6
Update the console entries for new tty names.
2001-06-07 20:16:55 +00:00
simonb