tls
59b84cdaa8
Fix minor mistake made while increasing number of pty devices: where we had
...
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
2002-02-02 20:58:43 +00:00
tls
1977a7b24e
Add support for many more (930 or 992) ptys than the current 256.
...
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
2002-02-02 07:04:44 +00:00
eeh
5092e6e3e9
Create ttyC00 and ttyC01 for NS16550 serial ports.
2002-01-24 22:22:26 +00:00
oster
e474b1951e
Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
2002-01-19 18:59:17 +00:00
manu
98572ccabc
Added clockctl
2002-01-13 14:21:26 +00:00
lukem
d5767e945e
fix a couple of spelling mistakes in the i4b* descriptions
2002-01-08 02:46:10 +00:00
wiz
b83df16226
Standardize ch* and uk* descriptions.
2001-12-19 18:29:56 +00:00
wiz
864c94c933
Standardize scsibus* description.
2001-12-19 17:58:05 +00:00
thorpej
44f4566e1a
Change the way kernel sets are specified, and make them
...
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00
jmc
e6a08ecc0f
Fix typo on pci* add's. Missing bash
2001-10-20 05:57:32 +00:00
mrg
3ca38a76ec
add comments for previous; fixes MAKEDEV.8 generation. noted by wiz.
2001-09-15 18:31:50 +00:00
mrg
57dca874e2
create ss, ch, uk and pci devices.
2001-09-15 17:44:47 +00:00
eeh
97ff24357e
Clean this up so it works again.
2001-08-26 05:31:28 +00:00
mrg
a826a2ecf0
clean up a bit; also fix a snap_pre_md segment to be in snap_md_pre so it is actually executed.
2001-08-23 16:01:56 +00:00
mrg
5b9869d189
don't clobber INSTALLATION_DIRS, just add to it. add support for building
...
32 bit libraries, crt and ld.elf_so on 64 bit platforms (disabled by default).
2001-08-23 14:40:21 +00:00
mrg
bf0195348a
the installation directory is called miniroot not xminiroot.
2001-08-19 14:18:39 +00:00
eeh
9d85345191
Build an INSTALL kernel too.
2001-07-21 05:58:28 +00:00
wiz
ce7170d77d
Remove bpp before re-creating it. port-sparc64/12934 by John Heasley.
2001-05-14 09:11:10 +00:00
wiz
c897860d56
Reflect correct architecture in comment.
2001-03-12 14:10:03 +00:00
mjacob
ff6391eccb
add knowledge of SES device (4)
2001-02-28 00:07:26 +00:00
martin
a93eaf9bc7
Add isdn devices
2001-01-08 22:26:24 +00:00
mrg
1ab6aa7287
s/ramdisk/xminiroot/
2001-01-07 09:31:17 +00:00
eeh
cfe1eed228
Make the node for the bpp device [parallel port].
2000-12-16 22:04:14 +00:00
tsutsui
90ac46632d
Make md(4) device files on "all" target.
2000-10-29 13:03:37 +00:00
mrg
7396e4ef69
for PCIIDE users.
2000-08-22 05:33:27 +00:00
mrg
4c835d91f6
add ramdisk support
2000-08-20 14:48:32 +00:00
mrg
d2e1f953ef
make that "audio*" not "audio".
2000-08-13 15:37:09 +00:00
mason
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
mrg
64fe1807a8
remove xy & xd support.
2000-08-09 10:54:20 +00:00
mason
12fa1acae3
As before, make 64 PTYs default. Forgot to move updated version back after
...
moving it aside to commit fix to previous version, prior to larger commit.
2000-07-27 18:46:15 +00:00
mason
d123ebaad1
Correct typo - missing $0.
2000-07-27 18:41:34 +00:00
eeh
1feaf31d56
If MACHINE_ARCH is 64-bit then only build 64-bit kernels.
2000-07-07 23:06:09 +00:00
mrg
c76b8a26a9
add "wd" support
2000-07-01 16:27:47 +00:00
tsutsui
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
tsutsui
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
ad
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
ad
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
hubertf
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
abs
64532f71cf
Add 'ipl' to 'MAKEDEV all'
1999-07-04 16:01:04 +00:00
mrg
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
cjs
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
eeh
075abac71c
My own special /etc.
1999-01-23 21:03:22 +00:00
