7a1dcbfac6
Clean up open and close routines somewhat.
1994-11-21 11:28:47 +00:00
fd32202948
Replace dev_unit with device_softc in scsi_link. Change argument to foostart()
...
to void*.
1994-11-21 10:39:09 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
38483bbbf0
Enough Chinese torture already
1994-11-15 23:00:23 +00:00
d8561ad477
Oops; update scsibusmatch() arg list.
1994-11-03 22:09:00 +00:00
ef0c18e1cf
Always use direct configuration for SCSI devices.
1994-11-03 22:05:08 +00:00
54608f7ea0
Remove a couple of i386-specific hacks, and make a couple of others #ifdef
...
CONFIG_INDIRECT instead.
1994-11-03 20:24:21 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
28cbceeec7
Make this more likely to work.
1994-10-23 19:24:01 +00:00
e5d974c51f
First cut at making user-level SCSI commands work. This is untested.
...
Partly from John Brezak.
1994-10-20 20:31:23 +00:00
b8ab5f65d1
Back out change to print geometry from label at boot; can't do this reliably.
1994-10-20 16:54:44 +00:00
7d391c250d
Fix minor omission.
1994-10-20 14:10:18 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
bb12b9c8a2
Trivial stylistic changes.
1994-10-20 14:05:08 +00:00
caaeda044b
Similar changes to sd.c.
1994-10-20 14:03:38 +00:00
b1568d887e
Use the block size in the label in most cases.
1994-10-20 13:50:38 +00:00
d5b3572f5c
Various changes:
...
* Get rid of unused `partflags'.
* Use dk_openpart, and remove `openparts'. Also, allow an open on both
the block and characters devices at the same time.
* If there was a label, print the geometry from the label at boot time.
* Turn `wlabel' into a flag, and *don't* set it automatically in
DIOCWLABEL; disklabel(8) does that.
Other minor changes.
1994-10-20 13:33:36 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
5aa2f1e6bb
remove an un-aligned access
1994-08-30 17:01:57 +00:00
692c724215
un-aligned access is not cool on some processors
1994-08-12 08:57:18 +00:00
da79c879cd
On probe or open, retry the READ CAPACITY once if the drive reports NOT READY.
1994-08-11 23:51:26 +00:00
3e685aec5c
Change ST_Q_NEEDS_PAGE_0 to something more generic.
1994-08-09 18:50:17 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
b5c5c47f92
Obey the command queue size for the controller.
1994-08-04 09:52:47 +00:00
863c736e39
Normalize label handling.
1994-07-26 19:39:19 +00:00
b10a5d5fac
change to support other MAXPARTITIONS vals aside from 8
1994-07-04 20:39:46 +00:00
fd7c79353e
knf
1994-06-29 23:32:42 +00:00
fccfa11af5
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:39:25 +00:00
72679b6801
Fix a comment.
1994-06-19 03:29:37 +00:00
7d3285c3d4
resolve confusion over who owns the buf after calling scsi_scsi_cmd()
1994-06-16 15:57:39 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
d023a319a4
Nuke some junk in scsi_link, as pointed out by Gordon.
1994-05-12 22:16:04 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
95faa87c60
remove union's from sense_data struct, conditionaly define RAW_PART
1994-05-09 07:40:47 +00:00
efbbf1b09f
Deal with variable-length drives that don't specify a maximum block size.
...
c.f. SCSI 2 protocol definition.
1994-04-24 05:40:05 +00:00
df873c8545
Maintain the xs free list with LIST_*().
1994-04-20 22:13:33 +00:00
eee893f9ea
Various cleanup, but no functional differences.
1994-04-13 05:43:19 +00:00
58dfc9dffc
Fix various types. Remove some outdated flags.
1994-04-11 03:53:58 +00:00
c01cb5c454
Fix various types. Remove some outdated flags. Actually sleep a bit if
...
there are too many commands pending on the controller.
1994-04-11 03:53:45 +00:00
8b10b2cd18
Combine scsi_start_unit() and scsi_stop_unit(), and increase the start
...
timeout (again).
1994-04-11 02:23:41 +00:00
f16c2e25f8
Add another rogue...
1994-04-10 00:07:02 +00:00
5fe1b5b538
Redo the last change; it was compltely bogus.
1994-04-06 00:43:57 +00:00
87e831ef86
Try to detect garbage data from page 4 sense.
1994-04-06 00:23:31 +00:00
100fdbd6d1
This line is redundant for LD_UNLOAD (only one use, and it does this itself)
...
but breaks LD_RETEN, forcing a reload of the driver state on the next I/O
operation. Therefore, it goes away.
1994-04-05 22:39:37 +00:00
8d0730c420
Reload the tape after retension.
1994-04-05 22:18:00 +00:00
44f11a89b3
Implement MTRETEN (untested).
1994-04-05 22:08:09 +00:00
692dc0e998
Implement MTEOM, currently untested.
1994-04-05 21:59:49 +00:00
96f452cd84
Deal with Mark Weaver's rogue tape drive.
1994-04-01 06:49:22 +00:00
72a5d83ab3
Clean up deleted files.
1994-03-29 04:29:47 +00:00
2e5a28159f
New SCSI system, based on Julian's more recent work.
1994-03-29 04:29:20 +00:00
d5a269b4dd
Put controller target in scsi_switch.
1994-03-25 07:38:51 +00:00
c3218832ba
print even more SCSI sense data; this should be in a function...
1994-03-24 17:47:35 +00:00
20c82de12d
print out lots of info on non-media hardware error...
1994-03-24 04:32:44 +00:00
499efbcbdd
More KNF-like.
1994-02-16 02:41:10 +00:00
4335fa14b3
Increase the timeout for start_unit.
1994-02-16 00:47:35 +00:00
94b2718bd1
PARANOID --> DIAGNOSTIC for inexpensive tests.
1994-02-14 21:43:33 +00:00
adeebc448e
Use b_actf, not av_forw.
1994-02-06 10:00:30 +00:00
42e64dc254
Remove another use of b_actl.
1994-02-06 08:01:45 +00:00
4ecdacf90d
Add scsi_stop_unit(), from Mac code. Other minor nits.
1994-02-01 20:05:19 +00:00
894bb31ed1
print nice numbers for disks >2G. from <adrian@lemmings.cursci.com>
1994-01-25 08:56:45 +00:00
80f5666771
If SCSI_DEBUG is on, a structure member wasn't updated from adapter_unit
...
to scsibus.
1994-01-22 14:16:58 +00:00
efdb9fa688
*strategy functions return void.
1994-01-11 17:19:37 +00:00
f59a5e6fcd
fix from Nick Cuccia (cuccia@remarque.berkeley.edu), apparently
...
originating from Gary Grebus <glg@k8lt.ampr.org>: partition size
must be in units of DEV_BSIZE.
1993-12-23 09:35:51 +00:00
b4d3382694
Canonicalize all #includes.
1993-12-17 07:56:32 +00:00
31a8c70935
0xfe000000 --> KERNBASE
1993-12-13 11:50:13 +00:00
8caf0ca62b
Use new struct buf fields.
1993-11-29 20:33:25 +00:00
5820418cb2
Remove remaining sleep()s.
1993-11-27 19:49:09 +00:00
8cd6aec465
Patch from Julian to fix hangage when opening a device multiple times.
1993-11-25 04:03:20 +00:00
e985f4041a
Still under construction...
1993-11-24 09:45:04 +00:00
37548328a1
Under construction...
1993-11-24 04:52:44 +00:00
67dfce6728
Normalize play_msf changes with 386bsd patch.
1993-08-04 19:33:44 +00:00
80a965ba28
Add play_msf command and MSF variants. This is SCSI2 stuff and is needed for many flavors of player utilities.
1993-08-04 17:26:20 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
4ff2032a1d
Clean up deleted files.
1993-07-29 12:40:19 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
30c2a20262
patches from allen briggs to fix a minor bug in *attach()
1993-07-19 11:30:49 +00:00
cb880ccb94
fix evil interaction with new physio; don't set error bit for short reads.
1993-07-09 04:28:55 +00:00
44b5013862
Reject non block-aligned transfers (where a block is 512 bytes in length);
...
they were causing scsi controller lockups. Replace an occurrence of "512"
with SECSIZE, which is #defined to be 512.
1993-07-04 07:09:59 +00:00
1b69e917eb
ANSIfications.
1993-06-27 06:59:20 +00:00
ebfdfc5b8a
Silence size complaint at probe.
1993-06-17 12:18:29 +00:00
280a747d4e
woops - another typo.
1993-06-16 10:39:35 +00:00
1311db833c
whoops. typo.
1993-06-16 04:31:37 +00:00
a6d9adf224
fix to intuit the maximum number of scsi units available on a device
...
driver. this piece at least, should be safe from changing sizeof(dev_t)
1993-06-16 03:39:30 +00:00
d307daf9f6
scsi probing spent too much time on the bus -- sped it up now,
...
and simplified the message printing code (works the same)
1993-05-27 10:14:02 +00:00
ee59868966
patch00149 by Julian Elischer <julian@jules.dialix.oz.au> & Rodney Grimes.
...
When an error was encountered, the sd/cd drivers printed blockno&ff0000
rather that blockno.
1993-05-25 07:27:31 +00:00
171495eaa4
Changed when disks are started, to get DEC disks working.
1993-05-21 12:20:30 +00:00
6fb28b3c74
more disklabel changes
1993-05-20 23:12:53 +00:00
e34f239662
First cut at cpu independent disklabels.
...
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
c59cd967ff
add rcsids and clean up file headers
1993-05-20 03:46:09 +00:00
c2cbdf5d9e
fix stupid line transposition (from John Brezak <brezak@osf.org>)
1993-05-11 08:07:50 +00:00
47622db521
fixed bug from last commit
1993-05-05 00:29:38 +00:00
a0bcb17e60
support for making dev->id_alive be set, this is for iostat to
...
find disk devices. wee bit of a kludge. sub-device attach()
routines must now return 1 for successful attach(), 0 otherwise.
Other bsd's do this too..
1993-05-04 08:27:29 +00:00
d494d8e591
cosmetic change
1993-04-26 18:45:49 +00:00
f67957329b
Fix up error messages and return values.
1993-04-22 00:35:02 +00:00
c2f7555fda
Display more meaningful message on SCSI `unit attention'.
1993-04-20 10:51:51 +00:00
10e418c8b6
a test for mycroft..
1993-04-20 08:38:03 +00:00
30a1d7a9f1
Don't overwrite global kernel version string.
1993-04-19 21:20:46 +00:00
bee6f373e4
fixed various bugs like cdattach() returning garbage.
1993-04-12 12:10:28 +00:00
d0d3380f80
small fixes
1993-04-12 10:15:21 +00:00
2c98ef3b72
new scsi subsystem.
...
changes also in config/mkioconf.c
i386/isa/wd.c, fd.c, and all scsi drivers.
1993-04-12 08:19:28 +00:00
mycroft