haya
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
enami
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
pk
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
enami
65c138fea0
- Print a name of root device even if it is a network device.
...
- If RB_ASKNAME, only dumpdv holds the results asked interactively.
Examie dumpspec only when !RB_ASKNAME. This allows us to override
dumps on none in kernel config file by booting kernel with RB_ASKNAME.
- Slightly rearrange code so that it more matches to comment.
2000-01-25 09:23:59 +00:00
enami
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
enami
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
haya
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
haya
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
augustss
beaf3d82fc
Ooops, add another ucom file.
2000-01-25 08:46:00 +00:00
augustss
85fcd0b58d
Update for the ucom(4) addition.
2000-01-25 08:31:56 +00:00
augustss
a2b1ac707a
Split the umodem driver into two parts: the part that emulates a tty over
...
two bulk pipes, and the setup and status fiddling goo.
This allows the former part to be shared by other drivers that need to
look like a tty.
2000-01-25 08:12:58 +00:00
mycroft
509c38cc44
Regen.
2000-01-25 08:07:14 +00:00
mycroft
6a4d06f322
Use the Ethernet vendor ID to differentiate multiple cards with the same
...
vendor,product pair. (Yuck.)
2000-01-25 08:06:49 +00:00
tsubai
05ceaaaad5
Add UniNorth.
2000-01-25 07:19:11 +00:00
jlam
03ebb087f7
Regen.
2000-01-25 06:53:26 +00:00
jlam
4d836ce7f2
Fix product code for Aironet PC4800. Should be 0x0007.
2000-01-25 06:52:54 +00:00
chopps
b5064330de
The cfe is initialized to the default entry, when a table entry value
...
is present don't OR in the flags with the defaults, replace them.
2000-01-25 06:36:17 +00:00
chopps
b50b01e020
Don't enable the interrupt until after we cycle the power, disable
...
interrupt at disable, and make this code look more like the std pcic
code. From Mycroft and I.
2000-01-25 06:16:34 +00:00
chopps
8c090e4862
set havenet to 0 when we are switching between operating modes and only
...
after association in ifrastructure mode. Also, deal with roam start
and rejoin net commands.
2000-01-25 05:32:28 +00:00
thorpej
be3c43687c
Make sure the latency timer is set to a reasonable value.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2000-01-25 03:44:27 +00:00
enami
047cc5e94f
Cleanup setroot() a bit:
...
- No longer necessary to use goto, just breaking the loop like other case
is enough.
- Don't caliculate loop invariant every time. Just reuse.
2000-01-25 03:42:36 +00:00
thorpej
35f3518a91
Fix a fatal typo in a Pyxis SGMAP TLB bug workaround. Noticed by
...
Jeff Roberson <nomad@nop.aliensystems.com>.
2000-01-25 03:32:36 +00:00
thorpej
c4d8a60bac
Handle Cobalt Networks interfaces, which are 21143 pass 4.1 devices
...
with a simple (MAC address only) SROM format.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:23:56 +00:00
thorpej
8f7ad1f798
When checking for a non-standard address ROM format, allow the
...
Cobalt Networks address ROM through.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:14:12 +00:00
ad
ea0751f1aa
Finish with fixing the SOFTCURSOR stuff.
2000-01-25 02:44:03 +00:00
thorpej
4be7a36436
Add Raytheon RayLink.
2000-01-25 01:50:12 +00:00
sommerfeld
43311a870f
Regen
2000-01-25 01:17:40 +00:00
fvdl
cb47ac210f
Add prototypes for exec hooks.
2000-01-25 01:15:29 +00:00
fvdl
65e677bd99
Add an exec hook mechanism, where kernel subsystem can register to
...
execute certain functions when a process does an exec(). Currently
uses a global list. Could possibly be done using a per-process list,
but this needs more thought.
2000-01-25 01:15:14 +00:00
sommerfeld
97597e1d12
Add ID for BayStack 660 (DS version of 650)
2000-01-25 01:15:06 +00:00
mycroft
a443bc2758
+IPv6 +Raylink/Aviator
2000-01-25 01:10:50 +00:00
thorpej
fe58a40561
Define some convenience information and tables related to ifmedia status
...
bits for ifconfig(8).
2000-01-25 00:58:59 +00:00
nisimura
d3657aebd3
Change the previous decision.
...
NetBSD/luna68k (1) creates UniOS/ISI label with BSD label embedded
at offset 64, (2) reads BSD label if found, (2) falls back to
reading UniOS/ISI label when no BSD label is found. Plus, (4)
reads SunOS label if found in place of UniOS/ISI label.
2000-01-25 00:19:30 +00:00
enami
7acb650645
- fix comment style/indentaion.
...
- add comment to refer aic_pcmcia_enable.
2000-01-24 23:14:23 +00:00
chopps
7d55178466
support switching to/from adhoc/infrastructure mode with media opt.
...
fill in 802.11 correctly for 802.11 infrastructure.
code not verified with base station yet.
2000-01-24 22:05:53 +00:00
tron
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
thorpej
e2e27455dd
Use config_pending.
2000-01-24 18:35:51 +00:00
thorpej
0c93dded4a
Use config_pending. Addresses kern/9247.
2000-01-24 18:34:44 +00:00
thorpej
5aa64075cc
Add a `config_pending' semaphore to block mounting of the root file system
...
until all device driver discovery threads have had a chance to do their
work. This in turn blocks initproc's exec of init(8) until root is
mounted and process start times and CWD info has been fixed up.
Addresses kern/9247.
2000-01-24 18:03:19 +00:00
thorpej
6068308fcd
In cwdinit(), if there isn't a cdir vnode yet, don't VREF() it.
2000-01-24 17:57:34 +00:00
pk
9cfc74c312
Report write-protected disks.
2000-01-24 16:52:02 +00:00
soda
d4e0f6e9de
remove accidentally revived this file again, since this file was
...
moved to /cvsroot/syssrc/sys/arch/arc/conf/GENERIC,v
2000-01-24 16:30:14 +00:00
joda
7ac1ad97ba
The TI 2030 is a PCI-PCI bridge and doesn't belong here
2000-01-24 15:51:59 +00:00
joda
4b45d02e15
regen
2000-01-24 15:50:16 +00:00
joda
a8308ddfd4
TI PCI2030 is a PCI-PCI bridge
2000-01-24 15:49:50 +00:00
enami
29ffb365e2
Use format_bytes to convert drive capacity into human familier string (like
...
sd.c does).
2000-01-24 14:51:07 +00:00
augustss
bbd7b89f19
Recognize Linksys USB10T.
2000-01-24 08:47:43 +00:00
augustss
50f87c16d8
Regen.
2000-01-24 08:44:33 +00:00
augustss
46ada10a40
Add Linksys USB10T.
2000-01-24 08:44:07 +00:00
soda
4f994e0e73
Add commented out "ident"-command
...
from hubertf's changes to (removed) pica/conf/GENERIC
2000-01-24 08:04:11 +00:00