Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
74,855 Commits 606 Branches 0 Tags 3.1 GiB
dc037466f5
Commit Graph

9259 Commits

Author SHA1 Message Date
explorer
8fcc8721da Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes. 2001-01-11 20:35:02 +00:00
jhawk
0d99070cf2 Change wi(4)'s default from ad-hoc mode to BSS mode. Also 
some minor manpage fixes.
 2001-01-11 19:33:51 +00:00
tsutsui
4f8dfdb556 Don't copy Rx packet to mbuf if it has invalid length; just discard it. 
Fixes kern/11877.
 2001-01-11 14:38:58 +00:00
augustss
366e0029a8 Ad ezload attribute for EZ-USB firmware loader. 2001-01-11 13:14:08 +00:00
ichiro
3a755611ac about WI_TIMEOUT: 
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
 2001-01-11 11:54:21 +00:00
ichiro
a86eb3e683 NANOSPEED ROOT-RZ2000 WLAN Card work. 
(PRISM II)
 2001-01-11 11:37:54 +00:00
ichiro
c8cf783ce8 regen 2001-01-11 11:33:19 +00:00
ichiro
b7cad127b5 add product 
NANOSPEED ROOT-RZ2000 WLAN Card
 2001-01-11 11:32:56 +00:00
augustss
35e36fee18 Add USSCANNER_DEBUG 2001-01-11 06:33:51 +00:00
augustss
d03f7a8f4b Mention that I found protocol info in the Linux driver. 2001-01-11 06:33:22 +00:00
augustss
7d90b0cb9c Note that I got information about the protocol from the Linux driver. 2001-01-11 06:20:04 +00:00
augustss
4dc9c52505 Add usscanner and uyap. 2001-01-11 06:01:18 +00:00
augustss
8765aa2c42 Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. 
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
 2001-01-11 06:00:31 +00:00
ichiro
35b9cac9d5 regen. 2001-01-10 23:48:54 +00:00
ichiro
263cb744f8 add EMTAC A2424i 11Mbps WLAN Card 2001-01-10 23:47:56 +00:00
martin
8c2f65891f Prefer memory mapping over io mapping for this card too, 
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
 2001-01-10 21:41:36 +00:00
martin
a42939d604 Make the driver try mapping memory first, the try io. 2001-01-10 20:31:49 +00:00
aymeric
fc0f2f8909 Added four config entries for the DLink DE-650CT. 
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
	around 0x300 or we'll end up with a lot of quirks for NE2k based
	cards which have bad CIS's.
 2001-01-10 17:37:27 +00:00
ad
6b133efd3e Make this work with the SA 431 and 42xx series controllers. 2001-01-10 16:48:04 +00:00
thorpej
3ba997a164 Add the 53c1510d and 53c895a. 1510d confirmed working by 
Mark Davies <mark@MCS.VUW.AC.NZ>.
 2001-01-10 15:50:20 +00:00
tsutsui
6c3ff254ea Get rid of (unintentionally added) ^M. 2001-01-10 14:58:08 +00:00
tsutsui
234840a1ae Initialize the FBC mode register in cg6attach(). 
Values are taken from sunGX.[ch] in xsrc.

Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
 2001-01-10 13:26:52 +00:00
rh
3d5c5173f5 Add a quirk table for specific implementations. 
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
 2001-01-09 23:27:07 +00:00
rh
6ec1759deb regen 2001-01-09 23:20:22 +00:00
rh
ca3478d0e2 Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e) 2001-01-09 23:19:03 +00:00
thorpej
d11cfe3c79 Regen; added Symbios 53c1510D. 2001-01-09 23:16:18 +00:00
thorpej
ff00b6c009 Add Symbios 53c1510D. 2001-01-09 23:15:39 +00:00
rh
cb2d30303b Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right 
mixer channels to be swapped (required for hardware that has wiring
reversed).
 2001-01-09 23:14:25 +00:00
martin
ba45ad64d3 Ifdef some routines only needed for ELSA Quickstep cards when compiling 
without support for those.
 2001-01-09 21:26:30 +00:00
mjacob
442e2e73a9 ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT. 2001-01-09 18:56:24 +00:00
mjacob
64c3b7f881 Add some 2X00 specific state flags for status response entries. Add the 
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
 2001-01-09 18:56:06 +00:00
mjacob
5599d31360 ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY 
is for both local loop and fabric cases now.
 2001-01-09 18:54:53 +00:00
mjacob
81df08ddef Use a SNS REGISTER FC4 TYPE subcommand to register with the name server. 
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
 2001-01-09 18:54:06 +00:00
ad
1b4eef2721 - Make VDAC state per-board. 
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
 2001-01-09 16:04:03 +00:00
lukem
0ed2fcf9fb *minor* knf 2001-01-09 06:36:13 +00:00
martin
ac6176f581 Fix some oversights from fixing option names. 2001-01-09 00:46:01 +00:00
thorpej
7bebf9a408 On ADMtek chips, don't just idle the chip when programming the 
multicast filter.  These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
 2001-01-08 22:12:57 +00:00
thorpej
d101f6f462 Add Accton EN2242 10/100 MiniPCI Ethernet. 2001-01-08 21:50:47 +00:00
thorpej
2482ba1fab Regen; added Accton EN2242. 2001-01-08 21:47:38 +00:00
thorpej
3628087824 Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985). 2001-01-08 21:47:10 +00:00
thorpej
666e82a4e9 Use the AN985 media switch on the AN985. 2001-01-08 21:45:42 +00:00
thorpej
e9bb880aaf The ADMtek AN985 "ghosts" the single built-in PHY at every MII address. 
Work around this by having a custom media init routine that limits the
search to MII address 1.
 2001-01-08 21:40:29 +00:00
thorpej
f9c77ef635 Only build "esm" if it's included in the kernel config file. 2001-01-08 21:16:26 +00:00
augustss
e6616f532a Cosmetic changes. 2001-01-08 20:21:16 +00:00
thorpej
2b00271327 Regen; added DEC SWXCR RAID. 2001-01-08 20:08:17 +00:00
thorpej
18b051656b Add product ID for DEC SWXCR RAID (a Mylex v5 controller). 2001-01-08 20:07:21 +00:00
rh
a3aa8d5abc Add esm audio driver. 2001-01-08 19:55:51 +00:00
rh
ca3b496216 Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver 
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
 2001-01-08 19:54:31 +00:00
takemura
757dca55b7 These ioctl commands should be '_IOW' to set value. 
WSMOUSEIO_SRES
  WSMOUSEIO_SSCALE
  WSMOUSEIO_SRATE
 2001-01-08 11:20:24 +00:00
rh
21ea7bd559 regen 2001-01-08 09:53:08 +00:00