a775803f91
Add adv* entry under ISA devices
1999-06-06 17:57:23 +00:00
f6b3b14ce3
enable COMPAT_OSF1
1999-04-30 23:33:41 +00:00
aa1e5724b9
WSEMUL_SUN -> WSEMUL_VT100
1999-04-29 01:28:40 +00:00
be000bc016
Revert 1/2 of previous change. INSECURE is still OK for alpha.
1999-04-20 21:43:03 +00:00
702267a538
options INSECURE, like i386
...
pckbc* -> pckbc0, like i386
1999-04-20 06:16:35 +00:00
321c6be8de
Enable eap (Ensoniq AudioPCI), sb (SoundBlaster), and sv (S3 SonicVibes).
1999-02-25 12:37:39 +00:00
f927176889
Add internal 3com PHYs for the ex driver.
1999-02-22 07:44:50 +00:00
bd72e4386f
Add floppy controller and drives.
1999-02-18 20:39:04 +00:00
a1b52a0723
Remove the original -g, as a duplicate was (accidently?) added in 1.108,
...
and comment it out like it used to be, at least for now.
1999-01-28 18:03:56 +00:00
a9dbb4bc3c
ne* at pci? ...
1999-01-25 07:55:32 +00:00
6fe2522d57
second round of mouse renaming: psm->pms
1999-01-23 16:10:47 +00:00
cd93f8dfc9
- Add adv and adw SCSI controllers, commented out, as they do not yet
...
work.
- Add USB stuff.
- Add new pcscp SCSI driver.
- Comment out wss driver, as the configuration listed hangs some systems
cold.
1999-01-06 23:42:27 +00:00
e481435c53
Add sv driver.
1998-12-10 19:01:41 +00:00
59acb69be1
Add (commented out) 'gre' pseudo device line. Feedback is welcome.
...
Inspired by Klaus Klein.
1998-11-25 20:30:44 +00:00
e7f7d54046
The wss driver does work (AS200/233 uses it). Uncomment.
1998-11-25 18:37:27 +00:00
cf5710c839
Added a (commented out) configuration line for the RAIDframe device driver.
1998-11-16 16:44:55 +00:00
42921bd66d
Add the ex driver.
1998-11-04 00:40:03 +00:00
495a4bdb2c
Sync with new IDE support (e.g. pciide changes)
1998-10-14 18:31:34 +00:00
fb345194ad
document CLOCK_COMPAT_OSF1
1998-09-29 18:25:54 +00:00
38cae9f204
Replace TAB just after the keyword `options' with SPACE.
1998-09-02 02:02:33 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
88a83f13de
Back out previous.
1998-07-27 18:27:08 +00:00
6ebd8cf4e3
Comment out cs device. Kernels don't compile because there is no
...
cfattach structure found. Leave it to the author to untangle.
1998-07-27 18:02:02 +00:00
b0b64545e8
Add cs* at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:57:56 +00:00
02b767eee5
Take a stab at EB66 support. An EB66 is basically an EB64+ with a
...
21066 LCA instead of a 21064 + APECS.
1998-06-27 10:10:51 +00:00
843dd2d279
Add DEC_1000 support for new Mikasa[/Pinnacle] platform.
...
INSTALL-FLOPPY will have to wait; it needs attention w.r.t. size.
1998-06-26 21:53:10 +00:00
78d7f07efd
Very preliminary support for the Tadpole/DEC AlphaBook. These are basically
...
AXPpci33 machines + power management and a Cirrus PCI-PCMCIA controller.
There is currently no support for the power management facilities, and
the PCI-PCMCIA controller driver needs some work, but this should boot
and run from disk.
1998-06-26 05:42:34 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
731f8f0abd
Add DEC_1000A platform.
1998-06-24 01:12:45 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
3b9e9634fb
- Change the tcds child locator from "slot" to "chip", making it look less
...
like a TurboChannel locator, and more like what is actually going on.
- Allow tcds and asc children of tcds to be cloned.
1998-05-24 23:45:29 +00:00
ba482f242f
Fix lc0 (lemac) line(s) so that the de20[345]s will work again. Add depca
...
for de20[012]s (tested and works on a pc164sx).
1998-05-14 21:53:40 +00:00
326f8183dc
No need to hard-code the mcclock offset on the gbus; gbus is direct-config.
1998-05-13 22:03:07 +00:00
abbe1b7df3
Add Ensoniq AudioPCI driver. Commented out until tested.
1998-05-01 22:26:54 +00:00
6f3b521cd5
Whitespace sanity.
1998-04-24 18:18:41 +00:00
2b6154a68c
Add PCI IDE.
1998-04-18 01:19:40 +00:00
b7c6c315ea
convert to new wscons
...
(pcppi->pckbc, pms->psm, wscons->wsdisplay)
1998-04-15 21:19:21 +00:00
4fa71d82a5
add Alpha 4100 support
1998-04-15 00:46:57 +00:00
3786a63843
1. Always link at the high address, now that we can use free ram below
...
the kernel on most platforms, including all of the entry-level platforms.
2. Kill the comments and options for load address selection.
3. Kill the default -g.
1998-03-25 02:16:41 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
6e6e2d7ebf
Dump maxusers to 32.
1998-03-12 06:04:31 +00:00
18a1481f7a
Use NFS_BOOT_DHCP rather than NFS_BOOT_BOOTP. The former is more
...
flexible, and the boot blocks use DHCP already(!!!) and it'd be good
for the kernel to be consistent with them.
1998-02-28 02:01:32 +00:00
2c12105cda
Remove comment which says that fxp is untested (it is known to work now).
...
Also, make model name closer to what driver prints startup.
1998-02-13 04:33:30 +00:00
86adfd8033
Switch to MI IDE drivers, add ATAPI devices.
1998-01-15 07:17:19 +00:00
9c3e23d351
Compile in BOOTP support for diskless boot.
1998-01-09 17:10:16 +00:00
b52361ff54
add missing COMPAT_13 that kleink putzed
1997-11-30 23:18:59 +00:00
549ecbd70a
make SCSIVERBOSE default
1997-11-26 03:13:53 +00:00
61f3754047
add SYSVMSG and SYSVSEM to GENERIC kernel
1997-11-26 03:13:12 +00:00
dante