db8dc44033
Add support for detaching the interface.
2000-02-01 22:53:14 +00:00
d844a3ac41
First-draft if_detach() implementation, originally from Bill Studnemund,
...
although this version has been changed somewhat:
- reference counting on ifaddrs isn't as complete as Bill's original
work was. This is hard to get right, and we should attack one
protocol at a time.
- This doesn't do reference counting or dynamic allocation of ifnets yet.
- This version introduces a new PRU -- PRU_PURGEADDR, which is used to
purge an ifaddr from a protocol. The old method Bill used didn't work
on all protocols, and it only worked on some because it was Very Lucky.
This mostly works ... i.e. works for my USB Ethernet, except for a dangling
ifaddr reference left by the IPv6 code; have not yet tracked this down.
2000-02-01 22:52:04 +00:00
d8e72e215d
implement probing for available irqs on non-cirrus pcmcia controllers
...
including cardbus controllers running in pcic mode
2000-02-01 22:39:51 +00:00
064dbd29ad
Only print one 'IP Filter:' line when it gets enabled or disabled.
2000-02-01 21:41:36 +00:00
88a4a819b8
When renaming a file, make sure apporpriate vnode cache entry is
...
purged if a file system entry is removed. Fixes part of kern/8037.
Reviewed by: Wolfgang Solfrank
Tested by: jdolecek
2000-02-01 21:33:57 +00:00
b3bffdf856
Resolve conflicts.
2000-02-01 21:29:15 +00:00
9069b40366
Add a sanity check to ensure that a region being free()'d is actually
...
within the KVA range malloc() would return.
2000-02-01 19:37:58 +00:00
0cf304bb45
Always use BWX for bus access on Pyxis chips.
2000-02-01 19:29:28 +00:00
474894e5f6
Fix a bug in cpu_switch() introduced with the MIPSX_CPU_IDLE changes; we
...
have a 1 instruction delay after a load before the register contents are
valid on the R2000/R3000.
2000-02-01 18:49:03 +00:00
1247bea5c2
No need for mips_locore_jumpvec to be initialized data.
2000-02-01 18:38:50 +00:00
f43a171804
Match PNP0510 as well.
2000-02-01 18:33:22 +00:00
e7f114ba6d
Make sure to use delay() in usb_delay_ms() while cold booting.
2000-02-01 17:46:17 +00:00
c4d3702f61
msdosfs_lookup(): reformat some debug printf slighly to make them more readable
2000-02-01 13:59:34 +00:00
d69188d4e8
msdosfs_inactive(): correct debug printf to only claim MNT_RDONLY is set
...
if it's so
2000-02-01 13:55:23 +00:00
0e45514ac9
make compilable with MSDOSFS_DEBUG (adapt to usecount & writecount size change)
2000-02-01 10:33:18 +00:00
11264e95ef
Regen.
2000-02-01 10:21:00 +00:00
ad68157d83
Add an entry for Melco WLI PCM (but driver isn't available yet).
2000-02-01 10:19:51 +00:00
25b484e01a
Pass an appropriate value as alignment (0 is not such a value).
2000-02-01 10:12:04 +00:00
d549d0992b
Rearrenge code a bit for the sake of another device.
2000-02-01 10:00:41 +00:00
db644f36ea
Cosmetic changes.
2000-02-01 08:58:25 +00:00
98ba9b6a65
Sync awi_pcmcia_get_enaddr with mbe_pcmcia_get_enaddr.
2000-02-01 08:52:05 +00:00
f06ba20199
RCS Id police.
2000-02-01 08:43:25 +00:00
82cf6568cf
Sync wi/ if_wavelan_ieee.h version 1.4 of FreeBSD.
2000-02-01 08:23:37 +00:00
19aa9f2cbb
The workaround for Hagiwara SYS-COM Compact Flash card is no longer necessary.
2000-02-01 06:48:15 +00:00
a945b488ae
Regen.
2000-02-01 05:51:31 +00:00
032ef78e07
Print more detailed name for Corega ethernet cards.
2000-02-01 05:50:18 +00:00
6393288539
Put some #ifdefs around power and shutdown hooks.
2000-02-01 05:42:52 +00:00
3669884c32
Factor out a common functionality into a subroutine.
2000-02-01 05:28:01 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
a50bf9a39a
Include word access methods with stride 4.
...
Add a byte-swapping access_method array for use with MI wdc driver.
XXX Currently only read_multi_2 and write_multi_2 are used by MI wdc code;
XXX The other byte-swapping routines still need to be added.
2000-02-01 05:21:24 +00:00
d166ec2056
Do not forget to init intr_private
2000-02-01 04:14:18 +00:00
33051e5117
Use device_register to find the boot device more reliably. Should now work
...
on anything it's possible to boot from that we have a driver for.
2000-02-01 04:04:17 +00:00
aedaba9bc9
add strtoul
2000-02-01 04:02:59 +00:00
f77befbc84
#define __HAVE_DEVICE_REGISTER on ports that have it, and check for
...
that, rather than a list of architecture defines, in config_attach
2000-02-01 04:01:19 +00:00
be6d4a9d34
Fix chrtoblktbl[] array to reflect reality.
2000-02-01 02:59:30 +00:00
5b465690f2
Have .set mips3 directive to make it consistent with other *.S files.
2000-02-01 02:30:20 +00:00
a49e53d3df
(sys_open, sys_fhopen): remove declaration of vnops, now in
...
<sys/file.h>
2000-02-01 01:24:38 +00:00
e4b59906e1
(exec_script_makecmds): remove declaration of vnops, now in
...
<sys/file.h>
2000-02-01 01:23:29 +00:00
5b428483d9
add declaration for `vnops'
2000-02-01 01:22:45 +00:00
33e8c5b1df
Improve the readability of one small piece of code.
2000-02-01 00:18:29 +00:00
ae788a8a43
sync with current code. now IMPLEMENTATION doc is almost identical
...
to the latest KAME one.
2000-02-01 00:15:22 +00:00
3b5706e2e5
Fix a couple of whitespace glitches.
2000-02-01 00:07:50 +00:00
637a2eee6e
Use ifatoia() and sintosa() consistently, rather than using home-grown
...
casting macros intermixed.
2000-02-01 00:07:09 +00:00
1cb24101b9
Small amount of cosmetic cleanup.
2000-02-01 00:05:07 +00:00
3bf4c0f68b
Small cleanup.
2000-02-01 00:02:01 +00:00
af62350e32
Un-obfuscate a small bit of code.
2000-02-01 00:00:22 +00:00
891a2a9719
Implement bpfdetach().
2000-01-31 23:06:12 +00:00
1d24598795
Add check for wdc [MI wdc support].
...
Move 'cd' device back to end of the genericconf table - we want to check
the 'wd' device before the 'cd' device.
2000-01-31 22:51:53 +00:00
f12b50fc81
Add the wd devices for MI wdc IDE drive support.
2000-01-31 22:49:12 +00:00
64f779675a
Fix a couple more references to STRIPPROG.
2000-01-31 22:47:11 +00:00
thorpej