ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
4371d91433
Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater
...
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
2000-06-05 07:59:50 +00:00
6204fa3c99
Update to new evcnt stuff
2000-06-05 02:28:19 +00:00
2f85fe7adb
Adjust to new evcnt stuff.
2000-06-05 00:09:17 +00:00
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
a5156a5c97
Cleanup #if 0 cruft.
2000-06-04 22:21:09 +00:00
cffb580806
Implement the more flexiable `evcnt' interface as discussed (briefly) on
...
tech-kern and now documented in evcnt(9).
2000-06-04 19:14:14 +00:00
c8c1e5854f
Fix wrong test for (software) queue blocked condition.
2000-06-04 11:42:55 +00:00
0bd304e528
More event counter stuff. Plus a little cruft cleanup while doing it.
2000-06-04 06:16:53 +00:00
6dcc553fae
Remove outdated comment.
2000-06-04 02:16:05 +00:00
11ab56a399
Start counting interrupts.
2000-06-04 02:14:42 +00:00
576faa0c31
Start couting interrupts.
2000-06-04 02:14:12 +00:00
0b63accce0
Merge rf_update_component_labels() and rf_final_update_component_labels().
2000-06-04 02:05:13 +00:00
1dcc041500
Minor prototype cleanup.
2000-06-04 01:39:49 +00:00
e3a9f21a5f
Change the debug level from 1 to 3 for "skipping target" diagnostic
...
which spews unreasonably for a Qlogic SCSI-2 narrow controller, which
does not have ID's above 7.
2000-06-03 22:44:43 +00:00
2c127bf249
Allow getting a component label from a spare disk.
2000-06-03 16:44:43 +00:00
2c336f1de3
Add VAX display types along with the SPARCbook P9100.
2000-06-02 23:45:13 +00:00
f44619d89d
KNF some lines.
2000-06-02 18:34:05 +00:00
66e6338ac9
Use 'componentN' rather than leaving blanks for non-existant disks
...
in the 'raidctl -s' output.
2000-06-02 01:17:14 +00:00
9ee45aaf3a
Remove wbflush(). These are not necessary with the new IOASIC bus_space
...
framework. From Tohru Nishimura.
2000-06-01 21:46:17 +00:00
c6ddc6009b
Make it compile with USB_DEBUG.
2000-06-01 15:51:26 +00:00
fff66007d9
Reorder a little.
2000-06-01 15:43:32 +00:00
5218e2a490
Improve some portability items.
2000-06-01 14:37:51 +00:00
ed9486e158
Bring the coding style into the 80s, i.e., get rid of __P and use
...
ANSI prototypes and declarations.
2000-06-01 14:28:57 +00:00
87a5ae384c
Update URLs.
2000-06-01 09:58:19 +00:00
c9aff328d9
Make booted_device global (and booted_parition for consitency).
...
Eliminate it from header files and other extern definitions.
2000-06-01 00:49:49 +00:00
e4c35df1c9
kill __P in these files. (I had to look at them anyway with an eye for
...
adding some protos... and adding them with __P seems wrong, but mixing
__P and not __P in the same file seems wrong too, so...)
2000-06-01 00:22:52 +00:00
d09ecbdf2a
Add an entry for the HP ScanJet 6300C.
2000-05-31 23:10:39 +00:00
7173e7efaf
Add a comment.
2000-05-31 16:16:49 +00:00
ca8d562f6e
Be more careful when setting the alternate interface.
2000-05-31 16:15:49 +00:00
18cd73168e
Be more careful when setting the alternate interface so we don't end up with
...
nothing set at all if it fails.
2000-05-31 16:14:42 +00:00
6731216c72
Rename a define.
2000-05-31 16:13:31 +00:00
cedf73b36a
Regen.
2000-05-31 16:12:29 +00:00
b9406eb3e2
Add a Chuntex hub.
2000-05-31 16:12:08 +00:00
c0f99cc74a
Initialize xs_status to 0 after allocating a scsipi_xfer struct. Makes life
...
easier for driver debugging.
2000-05-31 11:14:25 +00:00
d86618eb5a
Implement the scsipi_getgeom method and guess the geometry of floppies
...
based on the number of sectors.
2000-05-31 09:17:13 +00:00
72684ce3ec
Add a method, scsipi_getgeom, to the adapter struct. If this method is
...
present it will be used to get the drive geometry if the MODE SENSE fails.
2000-05-31 09:15:48 +00:00
28b0517c9c
random thoughts on how i'm implementing this.
2000-05-31 03:42:34 +00:00
00a6796b71
Oops.. reconstruction percentages were being reported incorrectly.
...
Thanks to Manuel Bouyer for noting this.
2000-05-31 00:52:36 +00:00
ede7ab9361
Install ieee1394reg.h since user application (someday) will need it.
2000-05-30 22:52:02 +00:00
382a7af237
Don't print anything when detecting resume.
2000-05-30 16:56:54 +00:00
4f72f2f97d
Regen.
2000-05-30 15:18:30 +00:00
6b0aea9254
Add TEAC floppy.
2000-05-30 15:17:18 +00:00
6b0b8292ff
Add NOMODESENSE quirk for TEAC USB floppy.
2000-05-30 15:16:41 +00:00
e621957503
add more speeds (up to 3.2Gb/s)
2000-05-30 14:56:59 +00:00
53f83c5533
Use attribute packed for on-the-wire data structures.
2000-05-30 10:10:17 +00:00
e4217da6d0
As a safety, check that the controller is not suspended when we get
...
an interrupt.
2000-05-30 09:26:06 +00:00
f89b0f51ae
Call extent_alloc_subregion() with EX_MALLOCOK in
...
rbus.c::rbus_space_alloc_subregion().
2000-05-30 09:18:06 +00:00
f1b4af5ba1
Make this compile too.
2000-05-30 08:36:27 +00:00
b85fe33276
Make this file compile. (I know it's just a placeholder, but I couldn't
...
resist trying it.)
2000-05-30 08:31:57 +00:00
e78793c612
Beginning of a IEEE 1394 framework. An attachment for PCI OHCI controllers
...
and bus-independent module that just begins to print things out. No real
code behind it. THIS IS A WORK IN PROGRESS. The *reg.h are woefully
incomplete.
2000-05-30 06:56:13 +00:00
8e82dfa363
For a RAID 1 set that has N components, allow the set to auto-configure as
...
long as at least one of the master or the mirror is available for each
of the N/2 'rows' of the set. (No, RAIDframe doesn't do N-way mirroring..)
Thanks to Manuel Bouyer for noting the problem.
2000-05-30 03:29:49 +00:00
ef4a0a7cf8
Use #include <sys/kernel.h> instead of a 'extern int hz'.
...
Make this file more readable.
2000-05-30 02:04:29 +00:00
61143a446c
Add NOMODESENSE quirk for Y-E data floppy (thanks Jason for reminding me).
2000-05-30 01:49:19 +00:00
ea5a174495
Massage the SCSI commands when using the UFI protocol in a better way.
...
Now the Y-E Data Flashbuster floppy seems to work.
Thanks to Y-E Data for giving one to the project when I couldn't find
one easily.
2000-05-30 01:12:51 +00:00
997c3c5b8a
Add a quirk, SDEV_ONLYBIG, which implies that the device cannot handle
...
the 6 byte versions of READ, WRITE, and MODE_SENSE.
This greatly simplifies the UFI (USB Floppy) handling.
2000-05-30 01:08:23 +00:00
c7326acd04
Add the PCI attachment for IEEE 1394 OHCI controllers. Files to follow later.
2000-05-30 00:53:14 +00:00
fd1991294f
Regen
2000-05-30 00:21:07 +00:00
adaaa34784
Add the TI 1394 controllers. Makes all the 1394 controller descriptions
...
similar.
2000-05-30 00:20:41 +00:00
b9bb94500e
Obey the "Reset SCSI bus at startup" EEPROM setting.
2000-05-29 20:13:53 +00:00
405302008d
ADEV_CDROM -> SDEV_CDROM, for consistency.
2000-05-29 20:13:06 +00:00
1e59d99d28
For all network drivers that call ether_ifattach(), and also
...
have _detach() functions:
Ensure that softc keeps state about whether the attach succeeded,
and make the detach function return immediately if the attach did
not complete.
2000-05-29 17:37:12 +00:00
8cde93a435
* Support (not so) new cards. (only Cyclom-8YsP+ is tested)
...
* Make compilable with CY_DEBUG.
2000-05-29 12:05:41 +00:00
c11100526b
Don't let the autodetection code get tripped up by negative mod-counters.
2000-05-29 02:57:34 +00:00
f1f5c4d00e
Fix a couple of typos. (Thanks Wiz! :) )
2000-05-29 01:43:04 +00:00
39a667120f
In the event that an up-to-date component cannot be located for a specific
...
position, see if there is a failed component still hanging around that
we can use instead (but still mark it as failed). This leads to more
reasonable behaviour (and fewer surprises!) when autoconfiguring and
failed (or previously failed) components are still on the system.
2000-05-28 22:53:49 +00:00
6513ba6e74
Make this compile with UHCI_DEBUG in the presence of
...
-Werror: uhci_dump is no longer static.
2000-05-28 22:02:05 +00:00
16f02724d6
Some updates to the DEUNA driver:
...
- Change the transmit logic to send from a pre-allocated buffer instead
of doing DMA out of the mbufs directly. Timing shows that it takes
4 times longer to map in the mbufs via the sgmap routines instead of
just copying the data! This must be fixed sometine in the future.
- A bunch of other minor fixes.
2000-05-28 17:23:44 +00:00
5b3cb6b1a1
Add async I/O support.
...
FIOASYNC ioctrl command had been forwarded from wsmux to each mouse devices
and the devices had set their own event queue async mode. But no one had took
care of the event queue's mode of wsmux itself. Wsmux should make it's own
event queue async mode when it receive FIOASYNC command.
2000-05-28 10:33:14 +00:00
c461529353
regen
2000-05-28 10:25:25 +00:00
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
6fe0de17c6
Fixup copyright.
2000-05-28 07:18:58 +00:00
4ba1e04ba2
Handle ADEV_CDROM in quirks table.
...
Quirk entry for another Toshiba cdrom.
2000-05-28 07:03:59 +00:00
57e5e86ed1
Merge pmax and alpha ISDN register definitions.
2000-05-28 06:13:40 +00:00
f329fb84ad
We need to be slightly more clever during auto-configuration, to make
...
sure that we a) don't ignore components with correct mod-counters, and
b) do ignore components with bogus mod-counters.
2000-05-28 05:23:41 +00:00
1ddfaaf8fa
Umm.. Complete is not equal to 'left to do'. Fix the math.
2000-05-28 03:42:23 +00:00
e38b4355e2
Abort any parity re-writes before unconfiguring a RAID set.
...
Partially addresses PR#10182.
2000-05-28 03:00:31 +00:00
2864a7186a
reclaim transmitted packets on receive interrupts.
2000-05-28 01:28:52 +00:00
228570e110
When setting auto-config/rootable bits, only try to update the
...
component label if the component is actually alive.
2000-05-28 01:03:22 +00:00
1aaf6772f1
- Add a mechanism for obtaining finer-grained 'progress' information
...
regarding reconstructs, copybacks, etc.
- RAID 0 doesn't do copybacks, but don't make raidctl sweat about it.
2000-05-28 00:48:30 +00:00
3713246e34
Don't bother searching the qinfifo for SCBs to requeue in the BUSY
...
and QUEUE FULL cases; this is already done for all BAD_STATUS cases.
Make sure to requeue the SCB in the above cases internally in the driver,
the SCSI layer doesn't know how to deal with it properly.
2000-05-28 00:19:59 +00:00
cb5289547f
At least try to do something useful in the XS_BUSY case; don't cause
...
a panic by sleeping in an interrupt context.
2000-05-27 23:59:58 +00:00
4b7b35ae8a
When a bus is accessed for the first time, reset it. Without this,
...
some devices may not be found if the BIOS (which would normally
do the reset at startup) is disabled. Should really be done from the SCSI
layer.
Implement the SCBUSIORESET ioctl.
2000-05-27 21:58:15 +00:00
26b4598736
Components which match on everything but the mod_counter are
...
renegades, and must be handled correctly. In particular, they should
be added to their old auto-config set, but then immediately released.
Failing to do otherwise means that they potentialy end up in a
different (and competing!) RAID set which may auto-configure in place
of the correct one, and cause all sorts of chaos at auto-configure
time.
2000-05-27 20:29:14 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
e9b5b7aa5e
Add a comment to clarify why we actually want the component label to
...
be considered a 'match' even if the mod_counter is wrong.
2000-05-27 19:12:03 +00:00
39c7c9aff6
Change AdwInitCarriers in adwmcode.c
...
Add new AdwInitCarriers prototype in adwmcode.h
All of the supported adapters are now initialized calling a unique common
function
2000-05-27 18:24:50 +00:00
d2b2ed0970
Checking parity re-write status makes no sense on RAID 0, but let's
...
return something reasonable anyway.
2000-05-27 18:23:27 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
e42c2ac5fb
Ops, state should be RESET, not RECAL here.
2000-05-27 16:11:16 +00:00
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
21fc65e1a8
sleep() -> tsleep()
2000-05-27 04:52:27 +00:00
d0a8b751b2
Don't use sleep() and a callout; just use tsleep().
2000-05-27 04:46:24 +00:00
dd266dbb2f
Fix counting of output packets. Only count descriptors with TDES_LS set.
...
Also make transmit timeout logic more correct.
2000-05-27 04:26:32 +00:00
7ae8c684a8
Increase delay on EEPROM access.
...
CATS sometimes cannot read MAC address correctly.
2000-05-27 00:55:42 +00:00
38d5764cd1
Fix for a driver bug provided by Jon W Grubbs (jgrubbs@megsinet.net).
...
This bug is only visible on some disks, and I have verified that it works
correctly on VAX. However, du to the author, it is a problem on other
machines/disks as well. Here's the author's comments:
> The MI code for the NCR5380 has a small bug in it The RZ56 wants to
> negotiate for Synchronous Data Transfers and when it does, the current code
> looks like it will send a REJECT message as the spec calls for when we cant
> handle the request. However, a couple of lines of code in the
> ncr5380_msg_in routine are missing wrt the PARITY message and anything that
> wants to send a REJECT message. The ATN setup that is done in
> ncr_sched_msgout is immediately negated by the final byte ACK sequence in
> this routine. This causes bad things to happen to an RZ56.
2000-05-26 21:11:00 +00:00
e3427d8f2c
Call bus_dmamap_sync() properly before/after reading fcd_stats
...
in fxp_control_data.
2000-05-26 19:11:24 +00:00
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
de5dacd81d
KNFfied those files.
2000-05-26 06:32:56 +00:00
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
5dca757b0e
Swap the order of u_int16_t member in Tx/Rx descriptors
...
on big endian machines.
"Big endian mode" of smc83c170 actually works!
(i.e. no htole??()/le??toh() functions are needed.)
2000-05-26 00:20:26 +00:00
dea97be7fd
Don't use bcopy() to copy u_int16_t data to u_int8_t array.
2000-05-26 00:14:41 +00:00
c9a7ec7a66
Add Davicom DM9102 registers.
2000-05-25 22:50:11 +00:00
7c709cc6b4
Comment the fact that the X3201-3 requires FS|LS in the setup
...
packet descriptor.
2000-05-25 22:18:07 +00:00
f4a3f5ea48
So, while the DEC chips and other clones want no FS|LS in the
...
setup descriptor, apparently the Xircom X3201-3 requires it.
2000-05-25 18:46:07 +00:00
4bfbc7641d
Recognize the DE-650 with another vendor/product pair and OUI.
2000-05-25 17:21:48 +00:00
215a635a5b
Truncate receive buffers to 4-byte boundary. Slightly modified
...
from kern/10198, from Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-05-25 16:47:18 +00:00
2f08658512
Fix a couple of typos in debugging messages. From IWAMOTO Toshihiro,
...
kern/10194.
2000-05-25 16:37:33 +00:00
05a766d42e
Don't set FS and LS in the setup packet descriptor. From
...
IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>, kern/10194,
and confirmed with the 21040 manual.
2000-05-25 16:36:03 +00:00
3e54d43abc
Be sure to not use tagged queueing for a few commands.
2000-05-25 11:41:05 +00:00
c9347a04a5
Regen.
2000-05-25 10:16:37 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
c25111e4ae
Make two previous changes more correct, as shown by Izumi Tsutsui.
2000-05-24 13:20:32 +00:00
8922795de0
The EEPROM is little-endian.
2000-05-24 08:04:23 +00:00
66083288eb
Fix DMA status reading on big-endian systems. From Sanjay Lal on port-macppc.
2000-05-24 07:49:13 +00:00
35bf53bd9c
And a newline after error string.
2000-05-24 06:04:12 +00:00
37cc37ead2
correct pcmcom detach (like card removal). PR 9334.
2000-05-24 03:44:46 +00:00
d4bcd03b81
PR/10154: Antti Kantee: ignore 0 length resource(s)
2000-05-23 17:50:53 +00:00
2904666f56
Allocate dynamically the command block descriptors.
2000-05-23 17:08:07 +00:00
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
e662e86225
sd_interpret_sense() can be called from interrupt context; call scsipi_start()
...
with XS_CTL_ASYNC if the failed command was called with XS_CTL_ASYNC.
Add a SDF_RESTART flag to keep state, cleared in sddone().
A mounted disk can now spin down, it will propely spin up at the next access.
2000-05-23 10:20:14 +00:00
373582e298
scsipi_get_xs(): if we have XS_CTL_URGENT, return an xfer even if
...
active >= openings. An XS_CTL_URGENT command could otherwise fail, especially
if openings == 1.
2000-05-23 10:16:43 +00:00
28ec465498
Remove $Id.
2000-05-23 08:41:49 +00:00
f87f33d513
Allow userland to retrieve whether the card support WEP while the
...
card power is off. This allows wiconfig to set WEP key etc while power off.
2000-05-23 08:25:51 +00:00
9f00930ace
Make AHC_DEBUG compile.
2000-05-23 03:50:12 +00:00
b7c3dc6d20
Recognize more models of the IBM card. From PR 10137.
2000-05-23 02:55:19 +00:00
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
b8322d5c23
Const poison the layout name.
2000-05-23 00:44:38 +00:00
c9fe89891a
Don't try to re-enable tags once they have been disabled because of a
...
MSG_REJECT from the target. Obey the NOTAG quirk.
2000-05-22 21:14:24 +00:00
f5d4219e96
Remove an used variable and add a missing `}' so that this compiles.
2000-05-22 16:52:03 +00:00
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
a6d8e45ba7
Call bus_dmamap_unload() if any Tx mbuf remains in rtk_stop().
2000-05-21 13:00:46 +00:00
20a98cb524
count input and output packets.
2000-05-20 18:33:18 +00:00
649ff32f2b
Rather than using a magic constant, use `com_scratch' as the offset
...
in UART space to the interrupt CSR.
2000-05-20 18:25:41 +00:00
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
9f7a44710e
Remove (more) VAX dependencies.
2000-05-20 13:41:33 +00:00
9816b43753
regen
2000-05-20 06:30:13 +00:00
773f9bb009
Add Geocast's vendor ID
2000-05-20 06:29:50 +00:00
071aed40ac
A foolish consistency; most parts of the kernel use bp->b_data, so
...
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
2000-05-19 18:54:22 +00:00
kleink