mycroft
da60005b96
Only do the Pentium trap fixup when we get a kernel mode page fault.
1997-11-13 05:31:04 +00:00
mhitch
7984f5ce3a
The scsi command length was not being set in rz_command(), which caused
...
the SII driver to fail when trying to get the drive geometry.
Remove extraneous newline when printing out the disk geometry during device
probes.
1997-11-13 03:56:49 +00:00
mycroft
4f8b60c6bb
Implement the BSDI kluge for the Pentium `hang'; leave the first 7 IDT
...
descriptors in an unmapped page, and patch up the trap information inside
the page fault handler if the faulting VA is inside the IDT.
1997-11-13 03:25:27 +00:00
mycroft
6a310175c6
Some general cleanup:
...
* Call gdt_init() earlier on.
* Don't bother to check for TSS and LDT descriptors in verr_gdt().
* Nuke the sti special case for trace and breakpoint traps.
* Move some variable declarations into more appropriate locations.
1997-11-13 03:16:42 +00:00
thorpej
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
thorpej
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
pk
ff4f5f4528
If necessary, defer console output until TX interrupt handler runs.
1997-11-12 22:18:54 +00:00
pk
39879b883e
Use a 1-character queue so polled console output can be deferred if
...
regular I/O has been scheduled.
1997-11-12 22:17:07 +00:00
augustss
dd95190002
XXX Workaround for ViBRA cards with two 8 bit DMA channels.
1997-11-12 20:28:42 +00:00
pk
a309481f34
Change load address to avoid cache-aliasing on machines with Harvard-style
...
cache implementations (notably the Hypersparcs).
1997-11-12 00:37:07 +00:00
fvdl
db0d6c4018
Add missing ;
1997-11-11 22:43:51 +00:00
kml
3b9fc85803
Remove an extraneous call to rtfree() in the path mtu discovery code;
...
this was causing negative reference counts on routes...
1997-11-11 21:10:50 +00:00
drochner
b80ad6c934
-point to console(4) manpage for serial console parameters
...
(suggested by Chuck Cranor)
-insert a reasonable IO base address for "iy at isa"
(from Ignatios Souvatzis)
1997-11-11 20:31:38 +00:00
scottr
d28cbedf2f
Fix typo in last change that causes lossage depending on
...
whether the MRG_ADB option is used or not.
1997-11-11 17:31:11 +00:00
mhitch
c390c7a5e1
The address used by mips1_FlushICache() is a virtual address, not a physical
...
address. This caused DDB to hang the machine hard when trying to set a
breakpoint.
1997-11-11 16:50:57 +00:00
thorpej
b6ac221d7c
Type/alignment cleanup in EEPROM code.
1997-11-11 06:35:46 +00:00
thorpej
6fcc8cd8b1
Add locators for "eg0" device, and enable it.
1997-11-11 05:53:06 +00:00
jonathan
b8636b832f
chipset driver for DEC pixelstamp and STIC (stamp Interface chip).
1997-11-11 04:47:57 +00:00
is
9360bfcc81
Remove remnants from ISA com console attachment code, which caused, due
...
to missing variable initialization, a panic on the DraCo.
1997-11-10 22:29:03 +00:00
ragge
7b60c8ed11
Fix multivolume installation bug; PR#4454.
1997-11-10 22:14:16 +00:00
mhitch
b0367937cb
Fix typo: NRASTERRCONSOLE -> NRASTERCONSOLE
1997-11-10 21:59:18 +00:00
pk
85524f37b3
Set `dvma_cachealign' on Hypersparc.
1997-11-10 21:20:07 +00:00
mjacob
479bc8877c
Protect userland applications from the inline splraise function.
1997-11-10 18:23:50 +00:00
is
ff1fd132f3
Forgot this yestereve: s/CV64CONSOLE/CV3DCONSOLE/
1997-11-10 12:17:20 +00:00
jonathan
9dee06e184
Add px placebo driver to standard pmax options.
1997-11-10 08:26:33 +00:00
mycroft
402ecc3fed
Clean up code from last commit.
1997-11-10 08:26:09 +00:00
phil
b9b9e9752b
Remove comment on bim.8 man page.
1997-11-10 01:58:10 +00:00
phil
29bc127e91
Remove unknown .even, complete a string in a macro call.
1997-11-10 01:50:25 +00:00
is
f31e12d69d
- recognize CV3D in Zorro-II mode.
...
- use board address space > 4 MB, instead of iszthreepa(), to detect Z3-mode
boards. We dont want the bus, but want the address configuration.
- s/CV64CONSOLE/CV3DCONSOLE/
- s/cv3d_zorroIII == 1/cv3d_zorroIII/ and s/cv3d_zorroIII != 1/!cv3d_zorroIII/
1997-11-09 23:30:47 +00:00
scottr
a41bde2076
Get rid of MSGBUFPTECNT; fixes PR 4331.
1997-11-09 06:10:44 +00:00
jonathan
c176a3646e
Fix kernel divide-by-zero errors and other bugs with removable devices:
...
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
* Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
size and required users to mount `a' partition, breking raw-device
access like "disklabel rz?".
* Avoid possible divide-by-zero call to howmany() from rzstart(),
on removable media that aren't ready at device-open time.
Verified to work on rrz42.
1997-11-09 03:08:23 +00:00
jonathan
9e1d749da4
Initialize nfs_boot_rfc_951 to 1. Makes pmax kernels to use bootp,
...
not RARP/bootparams, to get diskless-boot config info.
Decstation PROMs already use BOOTP so we lose nothing.
1997-11-09 02:03:50 +00:00
scottr
60dd653baa
KNF: Fix some whitespace inconsistencies.
1997-11-08 23:22:38 +00:00
jonathan
0f41aef4b9
Workaround for port-pmax/4438 (pmax kernel glass-tty console code is broken)
...
until a proper fix is available:
Perpetuate the 4.4bsd design even further. Change keyboard-driver
open routines to check for an active raster console. If active, set the
keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
1997-11-08 21:55:05 +00:00
ws
f1be2b6fac
Fix lossage with diroffset handling in root dir
1997-11-08 19:18:57 +00:00
jonathan
1dfe80f178
Add MODE SENSE code from MI scsi sd.c to rz.c.
...
* add includes for sys/dev/scsipi headers.
* cut-and-paste mode_sense and disk-geometry sense code from sd.c,
with name changes sd -> rz.
* Write `rz_command()' to send SCSI sense commands based on
existing rz size-sensing code.
* get geometry info with page 4 and page 5 mode sense.
* use resulting geom info for default label, fake label, and when
using ultrix labels. (ultrix labels have no geometry info).
Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
1997-11-08 11:28:10 +00:00
jonathan
0bdc6f10b9
Commit `pacifier' driver for turbochannel PMAG-C option card:n
...
just acknowledge interrupts from the PMAG-C.
1997-11-08 07:27:49 +00:00
jonathan
fbac6ffd1b
Delete ancient warning printf() from when this code hadn't been
...
tested on 3MIN or MAXINE motherboards. Add __KERNEL_RSID while we're here.
1997-11-08 07:15:35 +00:00
thorpej
ec43979ba3
Properly determine the default media on '790-based cards.
1997-11-08 06:13:53 +00:00
gwr
5eda2e37e8
Oops...(pasto)
1997-11-08 05:42:07 +00:00
briggs
527e5cbc44
Force the probe to find the internal video for the 63x/575 models.
1997-11-08 04:12:52 +00:00
kml
86275dc497
TCP MSS fixes to provide cleaner slow-start and recovery.
1997-11-08 02:35:22 +00:00
gwr
924c57cce0
Disable DMA and interrupts for now (via se_options).
1997-11-07 22:11:19 +00:00
mjacob
c2845107f1
If we're in the middle of opening, don't let st_interpret_sense get
...
into the act and return EIO or whatever when we're just eating the
initial TEST UNIT READY induced check condition.
1997-11-07 18:16:23 +00:00
drochner
23e7d0a259
Adjust comment for new default fragment table size.
1997-11-07 17:01:45 +00:00
drochner
4ad496626c
Double default fragment table size. For fragmented and / or small
...
blocksize filesystems the old default was too small.
1997-11-07 16:59:41 +00:00
briggs
c1ed70f0d8
NetBSD RCSIds.
1997-11-07 13:31:15 +00:00
enami
140159fa85
Add the missing attribute `dp8390nic' for the device `we'.
1997-11-07 13:08:23 +00:00
scottr
a6c6c9c1ad
Update from John Wittkoski: work around problem with mice that claim to
...
support Extended Mouse Protocol, but really don't; the Logitech Mouseman
is one such mouse (model M-AC13-4MD).
1997-11-07 07:38:10 +00:00
scottr
13fa4227b1
Update from John Wittkoski: bug fixes for Cuda support.
1997-11-07 07:33:11 +00:00