Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
61,627 Commits 606 Branches 0 Tags 3.1 GiB
da4dc67d3e
Commit Graph

1540 Commits

Author SHA1 Message Date
thorpej
a183d34f04 - Implement cnbell() -- ring the console bell. The cn_bell entrypoint 
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
 2000-03-06 21:36:05 +00:00
thorpej
a6f861574a No longer necessary to futz with ifp->if_baudrate here. 2000-03-06 21:02:00 +00:00
enami
9066b12bbb Remove redundant assignment. 2000-03-06 10:21:46 +00:00
elric
b16807c51a Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c. 2000-03-04 10:25:57 +00:00
elric
c4019af322 Definitions of standard TGA monitors as used by DEC. 2000-03-04 10:25:07 +00:00
elric
7428bb6ffd Definition of struct monitor, which contains syncs, and dot clocks. 2000-03-04 10:24:34 +00:00
elric
fec44d6f55 Header for a generic RAMDAC that can be reused between different 
graphics cards.
 2000-03-04 10:23:39 +00:00
is
d8bf2eb8ef - we didn't write enable toe config1-3 registers before trying to set the 
media.
- read out original settings to find out what the defaults (EEPROM) for this
  board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
 2000-03-03 21:37:18 +00:00
enami
a5921b902e Check if device is active in the interrupt handler and the one second 
tick handler.
 2000-03-02 01:21:56 +00:00
thorpej
ac1b683642 Amend previous; pay attention to EX_CONF_MII on deactivate, too. 2000-03-01 20:53:11 +00:00
thorpej
448dfa4249 Only detach PHYs if we have MII in the first place, and remove a bunch 
of #if 0'd code which was copied from the Tulip driver.
 2000-03-01 20:51:50 +00:00
ad
c09a9a072f Oops, pasto. 2000-02-29 11:14:46 +00:00
joda
c627d45cc3 (fxp_init): don't clear the FXPF_MII flag as this results in a panic 
when detaching
 2000-02-28 10:16:17 +00:00
mycroft
a87f80ad5f Give the VPP bits better names. 2000-02-28 07:33:08 +00:00
enami
71df610aeb Remove no longer necessary workaround for hpcmips. 2000-02-27 22:57:20 +00:00
augustss
7b4eccb432 Use DPRINTF for debug messages. 2000-02-27 21:06:55 +00:00
mycroft
61cc77895b Some minor cleanup to the probe code. 2000-02-27 20:01:05 +00:00
thorpej
6f1701b01c Put a lock on the pcic, to serialize access to the chip during event 
handling.  This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
 2000-02-26 17:24:44 +00:00
mycroft
49f1a84ad6 Be even more careful about cleaning up the socket at boot time. 
Also, nuke the windows when the socket is disabled.  (They might be deallocated
and reallocated, and would thus cause a conflict.)
 2000-02-25 20:45:43 +00:00
drochner
7da6407d04 add (minimal, PIO only) support for the popular "Tundra Universe" 
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
 2000-02-25 18:22:39 +00:00
mycroft
7dbe5be481 Disable all windows at boot time, to avoid conflicts when reading the CIS. 
Also, GC a small bit of code that's inaccesible after the previous change.
 2000-02-25 05:26:17 +00:00
mycroft
ac4c520f05 If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we 
don't try to use the socket any further.  (This will only happen if the user
explicitly unconfigured some of the sockets.)
 2000-02-25 04:24:37 +00:00
itojun
1ccb9e8170 when change mbuf type, clear m_pkthdr so that we do not get panic with 
old data in pointer fields.  NOTE: we'll extend m_pkthdr field soon.

Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance?  it comes with code duplicate/synchronization problem with
sys/mbuf.h...
 2000-02-25 03:39:13 +00:00
groo
f5f2ad429c Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and 
pnpbios attach.

examples:

	lm0 at pnpbios0 index?
	lm0 at isa? port 0x290


TODO: spinlocks, i2c interface.
 2000-02-25 02:17:43 +00:00
ad
50062f0914 - Don't use bitfields. 
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
 2000-02-24 18:47:55 +00:00
thorpej
3f9cf7572c Don't use void * for chipset tags. Bad hacker, no biscuit. 2000-02-22 16:04:44 +00:00
enami
32f100250f Cosmetic changes. 2000-02-22 02:38:26 +00:00
dbj
8f2d14fbd1 added wmesg argument to pcic_delay debug printout 2000-02-21 20:16:22 +00:00
mjacob
7f44584598 clen up some error messages 2000-02-21 19:18:53 +00:00
mjacob
d88aecac57 Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was 
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
 2000-02-19 01:53:56 +00:00
mjacob
ff86abe827 Cleanup some printaouts. 2000-02-19 01:51:43 +00:00
mjacob
b6dd4ddacf Add in ISP_SWIZZLE_CONTINUATION macro. 2000-02-19 01:51:21 +00:00
mjacob
8c2e6c73e3 Handle dual bus cases for immediate notify and enable lun commands. 2000-02-19 01:50:57 +00:00
mjacob
98f7f7b5a0 Fix ITDEBUG macro 2000-02-19 01:50:25 +00:00
mjacob
77dec43b22 Clarify cd_resid tag. 2000-02-19 01:50:03 +00:00
mjacob
8405ee3752 Add in some mbox return codes that define when we've used up target 
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
 2000-02-19 01:49:47 +00:00
thorpej
132107ce3b Add a whole slew of registers found in the PCnet-PCI family. 2000-02-17 20:18:29 +00:00
sommerfeld
50c84950f2 awi: rewrite to be higher performance. 2000-02-17 17:37:23 +00:00
sommerfeld
7adb22cfa5 Add detach support. 
Light cleanup.
 2000-02-17 15:58:32 +00:00
pk
1d373a94e2 Bump receive buffer size up to the maximum DMA burst boundary. 2000-02-14 17:14:28 +00:00
bouyer
085f44145c - Be more strict in status check before sending a command (make sure 
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
  of the problem is that the drive is unresponsive just after a reset.
  The real problem (and the solution) showed up after the first change.
 2000-02-14 12:37:35 +00:00
thorpej
1268cc5d6c If we got an xfer from our backlog queue, don't allow sleeping; we're in 
interrupt context.

XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
 2000-02-12 19:12:52 +00:00
enami
01868857df Add activate routine and check device active flag also in one second 
tick handler.
 2000-02-12 04:05:49 +00:00
enami
fbc47bda30 Cosmetic changes. 2000-02-12 03:55:49 +00:00
mjacob
1b188ee2ff A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h. 2000-02-12 02:33:34 +00:00
mjacob
55a78c1ee4 Add in 12160 (Ultra3) support. Turn back on fast posting for the new 
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
 2000-02-12 02:32:21 +00:00
mjacob
56e16448ad add in 12160 (Ultra3) related definitions 2000-02-12 02:29:00 +00:00
mjacob
9f63fdeefb add in 12160 (Ultra3) NVRAM definitions 2000-02-12 02:28:32 +00:00
mjacob
87355d841f add some Qlogic 2200 point-to-point and extended ICBOPT definitions 2000-02-12 02:26:26 +00:00
mjacob
50f2620822 add 80 MHz case 2000-02-12 02:25:28 +00:00