cd5cc87679
in COPYDIR, don't run the find's if the cd failed
2002-03-14 01:24:35 +00:00
1a1a1a5721
cosmetic tweaks: sort some variable lists, improve descriptions, [...]
2002-03-14 01:07:27 +00:00
a89c6bc776
Only select the RPC_WSCONS as default to prevent confusion and ending up
...
with an NC_WSCONS kernel (ahum)
2002-03-12 19:35:55 +00:00
4a02810f4c
Some extra comments
2002-03-12 19:33:54 +00:00
04a3a4cd64
Add a comment about the unpacking and settyping of the archive.
2002-03-12 19:20:10 +00:00
fc9881cf50
Created RAM discs are not versioned anymore ....
2002-03-12 14:28:27 +00:00
86c61262b7
Remove the -p flag ... not interesting for install media
2002-03-12 12:53:08 +00:00
2383085e6e
cosmetic consistency tweak
2002-03-12 12:52:52 +00:00
50fa8390ff
tweak the size from 4500k to 4480k, which is on a cyl group boundary
2002-03-12 12:51:57 +00:00
f671f099d7
Update the ramdisk building procedure after tips/hints of luke.
2002-03-12 12:44:19 +00:00
d448399edb
- set IMAGESIZE (grew by 24K) and a few more free inodes, as per discussion
...
with Reinoud
- minor reorder
2002-03-12 12:31:57 +00:00
bea10a7dc8
consistency cleanups
2002-03-12 06:39:18 +00:00
031fce2675
collapse some lines together
2002-03-12 06:28:32 +00:00
57a7dc2329
convert to New Distrib World Order.
...
this should be able to be built as non-root now.
XXX: untested (hi simon! :), as it can't be cross built yet due to
elf2ecoff and installboot issues.
2002-03-12 06:26:34 +00:00
3f267f7add
as we don't need local version of REV and VER any more, read in
...
distrib/Makefile.inc directly and remove the now-unnecessary
Makefile.inc from here
2002-03-11 07:11:37 +00:00
0a2de544dd
remove now-unused files
2002-03-11 07:06:19 +00:00
ceed08717c
- convert to New Distrib World Order, which allows this directory to be
...
cross-built without root privileges. (tested i386->sparc cross-build).
- remove now-unused cruft
XXX: there's still other parts of distrib/sparc that need fixing.
2002-03-11 07:04:21 +00:00
e35048b143
note ssh config pathname change
2002-03-11 07:02:12 +00:00
0a2445c3b6
move sshd config files to /etc/ssh
2002-03-11 04:57:55 +00:00
ce418d6d8e
dig /etc/ssh
2002-03-11 04:38:41 +00:00
91c57b31d0
rcsid
2002-03-10 20:23:28 +00:00
62aa4e74be
don't need this any more
2002-03-07 23:53:44 +00:00
dee3f84c6f
remove now-unnecessary cruft
2002-03-07 23:52:48 +00:00
ccfd870e0f
convert to using the New Distrib World Order.
...
this directory can now be built UNPRIVED.
2002-03-07 23:51:48 +00:00
38469044f3
Add entries for evbarm and evbmips.
2002-03-07 14:46:10 +00:00
dd9cafc939
Add manual pages for ipip(4) which got removed.
2002-03-07 12:34:26 +00:00
2f2730312f
cleanup to use check_RELEASEDIR
2002-03-07 02:24:25 +00:00
21e9386c5c
remove some unnnecessary variable assignments, and use ${NM} instead of nm
2002-03-07 01:58:30 +00:00
41669694d3
restore functionality lost in my previous rototill:
...
run pwd_mkdb to provide full /etc/{s,}pwd.db rather than using libhack.
xxx; still not tested
2002-03-07 01:48:36 +00:00
3566e993db
use parselist.awk's newly added MTREE arg rather than having an
...
mtree.conf fragment for one file
2002-03-07 01:41:48 +00:00
a4fb7ad013
add MTREE keyword, which just outputs its args "as is" for mode=mtree
2002-03-07 01:36:34 +00:00
28c8f6950f
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc
2002-03-06 23:50:55 +00:00
4438a8dcca
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc
2002-03-06 22:55:17 +00:00
521853db1d
simply VERDEP calculation by using ${_SRC_TOP_}
2002-03-06 22:36:58 +00:00
3f3656ac20
Add i4bisp(4).
2002-03-06 14:35:22 +00:00
4e53825732
only descend into miniroot if ${MACHINE}/miniroot/Makefile.inc exists
2002-03-06 13:32:51 +00:00
8a4df7f4da
use check_RELEASEDIR, and minor whitespace cleanup
2002-03-06 13:31:04 +00:00
9c0d5339f3
cleanup and use some more appropriate variables and targets
2002-03-06 13:27:22 +00:00
c8200aaa83
remove unnecessary stuff
2002-03-06 13:25:49 +00:00
87e13d110a
Convert to new common ramdisk build infrastructure, which supports
...
unprivileged cross builds.
XXX: untested as yet; probably needs minor image sizing tweaks
2002-03-06 13:21:00 +00:00
29173b1fb0
add more IMAGEDEPENDS, and some more cosmetic tweaks
2002-03-06 13:17:01 +00:00
b627dc63c4
cosmetic tweak
2002-03-06 13:11:34 +00:00
0a7bf05cec
clarify why we avoid gethost.o from libhack
2002-03-06 13:09:34 +00:00
b86c835122
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc
2002-03-06 12:39:10 +00:00
92208672a9
don't need to provide ${REV} here anymore
2002-03-06 12:32:02 +00:00
044bc4a6c1
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc
2002-03-06 12:27:08 +00:00
49b82438e7
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc
2002-03-06 12:14:26 +00:00
a8025d95ae
Commit work-in-progess rototill of distrib/miniroot and associated machine
...
dependent files:
- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.
- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.
- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!
- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!
2002-03-06 12:04:48 +00:00
a0ce988331
COPYDIR: output "./destdir" not "./destdir/." for the first entry
2002-03-06 04:47:58 +00:00
23a0a8fb2e
replace ${_SRC_TOP_}/distrib with ${DISTRIBDIR}
2002-03-06 04:29:35 +00:00
24e9625626
Add entries for sbmips.
2002-03-06 02:41:00 +00:00
da6ea33f69
Remove g711conv (hi martin!)
2002-03-05 23:57:49 +00:00
1d1d02da94
Make sure <bsd.own.mk> is pulled in before ${PRINTOBJDIR} is used.
2002-03-05 21:23:28 +00:00
0d1f6a757d
Use ${PRINTOBJDIR}.
2002-03-05 21:16:51 +00:00
22a7a11f35
Use ${PRINTOBJDIR}.
2002-03-05 20:41:28 +00:00
bdf6ab32ff
Use ${PRINTOBJDIR}.
2002-03-05 20:29:33 +00:00
f44b824188
Use ${PRINTOBJDIR}.
2002-03-05 19:53:19 +00:00
4b99ad4ad4
provide check_DESTDIR and check_RELEASEDIR targets in <bsd.own.mk>
...
and use those rather than local versions
2002-03-05 03:51:21 +00:00
fb33595139
implement COPYDIR for mtree and populate modes
2002-03-05 00:19:43 +00:00
c6fac1444f
Clean up make release procedure. But just make through
...
in distrib/mac68k/miniroot.
Reviewed by fredb, briggs
2002-03-04 16:43:06 +00:00
3406f0a3dd
The "gif*" tunnelling interface does everything ipip does.
...
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.
2002-03-04 13:24:06 +00:00
3f4dba701e
cosmetic sort
2002-03-04 04:49:26 +00:00
5013dbd1bb
Adjust for change in kernel set naming.
2002-03-02 18:41:41 +00:00
cc996740a3
Add entries for pkill & pgrep.
2002-03-01 11:26:48 +00:00
a5fc5a8af0
- use numeric rather than symbolic trap names; it's more portable
...
- read NetBSD.dist from ${DESTDIR}/etc/mtree instead of /usr/src/etc/mtree
- run mtree with "-N ${DESTDIR}/etc" instead of using the host user databases
2002-03-01 07:21:14 +00:00
8d5828f101
MD set lists for mvmeppc.
2002-02-27 21:57:09 +00:00
e2e2a20d7f
Add mvmeppc distrib Makefile.
...
This is just a placeholder for now.
2002-02-27 21:41:52 +00:00
5183aa7b10
Add mvmeppc.
2002-02-27 21:26:09 +00:00
1ee852b54c
pull in bsd.own.mk first, incase RELEASEDIR is defined there
2002-02-27 13:42:35 +00:00
a4cb5b7072
add myself(Takeshi Shibagaki). This is a practice of cvs.
2002-02-27 12:21:36 +00:00
c71e0408fb
Fixes to allow unprivileged building of the binary tar files to
...
contain the correct permissions.
Makefile:
- set SETSENV to the list of variables we wish to pass to each shell
script and use that, rather than duplicating the effort below
- call maketars with "-M ${METALOG}" if UNPRIVED is set.
getdirs.awk:
- takes a list of filenames and outputs the list along with all the
directories used by those filenames
maketars:
- support "-M metalog"
- merge etc/mtree/NetBSD.dist with the "-M metalog" for use in the tgz build
- for a given set, find the union between the set list and the metalog
generated above and use that as the list of files to ${PAX} up as the
tgz file.
2002-02-27 10:51:47 +00:00
6cfea188a7
- fix the comment describing what this does
...
- " egrep ... | awk " can be replaced by a smarter bit of awk...
2002-02-27 10:43:42 +00:00
2d86ced5d9
" egrep ... | awk" can be replaced by a smarter bit of awk...
2002-02-27 10:42:55 +00:00
9918e3a90e
use CLEANFILES as appropriate
2002-02-26 22:54:05 +00:00
0242a73525
cosmetic cleanup
2002-02-26 22:52:52 +00:00
e1ab92e728
minor whitespace cleanup
2002-02-26 22:52:10 +00:00
e0e10bde3f
Wait with exiting on error until all the install sets have been
...
attempted to be created.
This way, in "discover missing files" mode, you'll get the benefit
of getting all the missing files listed before this script bombs
out with a non-zero exit status, something which can be of benefit
on slow machines.
2002-02-26 20:03:08 +00:00
e77cbad9fa
add check_RELEASEDIR to targets that require RELEASEDIR to be set
2002-02-26 13:27:50 +00:00
8e7564ec57
add check_DESTDIR and check_RELEASEDIR targets
2002-02-26 13:25:03 +00:00
b719f1f08d
explain why gethost.o is disabled
2002-02-25 23:00:59 +00:00
6d0e6a9481
add rc.subr(8)
2002-02-25 12:07:45 +00:00
a771f7472b
remove USE_SYSINST goop that was obviously copied from the i386 stuff
...
and unconditionally add the sysinst list to LISTS; the goop is only in
the i386 stuff because that has some ramdisks which don't use sysinst,
where here on the hp300 it's not an optional item :)
2002-02-24 09:57:18 +00:00
a530714247
Trim the ramdisk down even smaller. Include the device files on
...
the ramdisk, since we don't have enough memory to dynamically build
/dev on mfs.
2002-02-23 22:02:08 +00:00
b85e9644ab
Don't use tset, since it's not on the ramdisk. Might have to rethink
...
this for serial consoles.
2002-02-23 22:00:28 +00:00
2328e1f7fb
Replace a tab with 8 spaces inside a .(disp to get more sane formatting.
2002-02-23 19:36:16 +00:00
7b2a130dc8
make this work in the new build system.
2002-02-23 17:27:42 +00:00
33842e660f
Add "release" targets.
2002-02-21 15:07:36 +00:00
72a1f227a8
pxeboot -> pxeboot_ia32, and add pxeboot_ia32_com0
2002-02-20 03:07:08 +00:00
38b981482c
fix past-o: netboot_pcnet_wd80x3.rom -> netboot_wd80x3.rom
2002-02-19 08:30:23 +00:00
1d194dffda
s/mdsetimage/${MDSETIMAGE}/.
2002-02-18 03:38:01 +00:00
e32f8db722
Now I exist here also.
2002-02-17 21:29:27 +00:00
7f18ea71f5
Add new i386 bootloaders.
2002-02-17 20:05:50 +00:00
94f5cc8310
Bring sun2 into the MACHINE_LIST, so that we don't later get warnings
...
that the sun2 number register is undefined.
2002-02-16 18:18:03 +00:00
c283c04ea4
Replace tabs with spaces in two places inside .(disp, so that the
...
bootptab and dhcpd.conf entries are not brought flush against the
right margin, but instead get sane formatting.
2002-02-16 18:17:04 +00:00
a3a4739481
Some more typo and punctuation fixes.
2002-02-16 10:54:55 +00:00
7de02b8b3d
The patches must have been missed... so i re-aplied the patches wiz made on
...
this document .,... thanks wiz for proofreading ! :)
2002-02-16 02:31:30 +00:00
b6b2c79819
Add the RISC OS gzip tool for installation purposes. It gets uudecoded and
...
installed in ../release/installation/misc/ next to the bootloader.
2002-02-16 01:53:52 +00:00
918a90814e
Update this allmost ancient prep.RISCOS file ... would like ppl. to proof
...
read it.
2002-02-16 01:39:10 +00:00
ce9ea3fcae
Typo, grammar and punctuation fixes.
2002-02-16 00:57:47 +00:00
93694f2a11
Make clear where the included gzip program is.
2002-02-15 23:32:50 +00:00
7fb5f3f3e7
Update this ancient prep document to refect the new bootloader... it still
...
needs heaps of work and needs proofreading but its something to start with.
2002-02-15 23:22:45 +00:00
703247c696
Second step of supporting XFree86 4.x binary sets:
...
- add list files for XFree86 4.2.0
2002-02-15 22:29:22 +00:00
363ed17eae
Use the install notes for Acorn32 ... the arm32 has to go but i'll leave it
...
here for Jason to use for shark
2002-02-15 22:01:37 +00:00
92a181b637
Move Amiga PORT to ELF and new toolchain. Still missing:
...
support in UPGRADE to move old shared libs to /emul/aout
2002-02-15 21:28:03 +00:00
42dd65f262
Implement (/copy) from the generic way the option to keep the existing disk
...
layout... this was missing for quite some time.
2002-02-15 00:40:23 +00:00
7ffc54f047
Fix typo....
2002-02-14 15:28:31 +00:00
b9a12f956d
Let the user choose between the other kernels available than just
...
`GENERIC'.
2002-02-14 15:25:02 +00:00
c48a398cdf
Make filesystem big endian.
2002-02-13 19:25:26 +00:00
bceed8cb26
add /usr/share/nls/nls.alias.
2002-02-13 07:55:20 +00:00
461d55a6e1
Make and install the new ramdisk installation media.
2002-02-13 06:07:15 +00:00
cb98d7284d
Update for new ramdisk build infrastructure.
2002-02-13 06:01:36 +00:00
e39f206107
Don't need this file with new ramdisk build infrastructure.
2002-02-13 05:34:39 +00:00
6a11dfc946
List for ramdisk. Bump ramdisk size to 2MB.
2002-02-13 05:31:18 +00:00
b0171c39d1
Don't need this now.
2002-02-13 05:30:16 +00:00
2a8b7cca5b
Use the new ramdisk build infrastructure.
2002-02-13 05:13:24 +00:00
06a1614310
- use explicit VND_GEOM instead of a disktab type, to allow cross-building.
...
All miniroot size information is now in one (this) file.
- While we're here, increase the miniroot size to 5 MB.
2002-02-12 11:20:38 +00:00
a23cd9356a
Use the building machine's raw partition instead of fixed "c" to allow
...
cross-building.
2002-02-12 11:17:47 +00:00
63c8419002
Add new pwcache routine manpages.
2002-02-12 02:27:59 +00:00
625b479b7f
Add some missing postfix manpages.
2002-02-12 02:20:57 +00:00
56decb54f5
Add ntpd chroot directories.
2002-02-12 02:09:12 +00:00
81edf862af
Add /usr/share/games/ching
2002-02-12 02:05:06 +00:00
8207e5da89
Add missing postfix stuffs.
2002-02-12 01:50:12 +00:00
391ce843cc
Add some missing postfix binaries.
2002-02-12 01:43:34 +00:00
acf8770a4a
remove REV in favour of DISTRIBREV (from ../Makefile.inc)
2002-02-12 01:38:17 +00:00
c8dd28f7a6
Add some missing postifx etc files.
2002-02-12 01:29:19 +00:00
abd5473dc6
Oeps... delete a former gzipped tar file first.
2002-02-11 23:07:46 +00:00
38c6b8576a
Include BtNetBSD in the release !
2002-02-11 23:02:23 +00:00
f55d6acbec
md.arm32 -> md.shark
2002-02-11 19:10:56 +00:00
454d67ac8c
Add pci_conf_hook(9).
2002-02-11 18:51:55 +00:00
f0c87a0e2d
First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
...
instkernel.
2002-02-11 17:49:40 +00:00
24a6d142c3
First step of supporting XFree86 4.x binary sets:
...
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.
2002-02-11 16:23:17 +00:00
4cd25cd0e8
First cut at cats support.
2002-02-11 13:50:18 +00:00
d7bcd10a27
ipfs allows state information created for NAT entries and rules using
...
keep state to be locked (modification prevented) and then saved to disk,
allowing for the system to experience a reboot, followed by the restoration
of that information, resulting in connections not being interrupted.
To activate this feature, set ipfs=YES in /etc/rc.conf
2002-02-11 10:19:55 +00:00
318f0d0f20
Add barriers after ramdisk and instkernel, but allow fd-set and
...
cd-hd-tape to be built in parallel.
2002-02-11 07:32:54 +00:00
725d029d19
Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
...
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.
2002-02-10 20:43:33 +00:00
3fcc2a907a
arm32 -> shark
2002-02-10 19:20:52 +00:00
0007bec6dc
Skeleton for ramdisk-style installation media.
2002-02-10 01:22:54 +00:00
3101b620cc
hp300 machine-dependent components
2002-02-10 01:14:05 +00:00
825e4687c7
Add /usr/share/dhcpd/pxe.defs
2002-02-09 21:16:34 +00:00
811d644d8f
don't set the owner or group when installing into $RELEASEDIR
2002-02-09 13:56:48 +00:00
8f25f0f1e6
use ${INSTALL_FILE} as appropriate
2002-02-09 13:49:28 +00:00
70b2ffae62
rcsid police
2002-02-08 05:17:49 +00:00
7533a60e6a
- migrate a bunch of the common list stuff to common/list.ramdisk
...
- use ${DISTRIBDIR} as appropriate
- use ${DISTRIBDIR}/common/list.sysinst if USE_SYSINST is defined,
removing any replicated list info
- define USE_SYSINST in the sysinst-using ramdisks
- replace MAKEDEV_DEVS with MAKEDEVTARGETS
2002-02-08 05:02:16 +00:00
44f0b844b5
since we have ${TOP}, use it...
2002-02-08 04:53:50 +00:00
5e74123ea2
- set ${TOP} to ${.CURDIR}/.., and use as appropriate
...
- use ${DISTRIBDIR} as appropriate
- migrate most of mtree.conf to ${DISTRIBDIR}/common/mtree.common,
leaving /.profile in mtree.conf
- remove MAKEDEV_DEVS support; replaced with MAKEDEVTARGETS support in
${DISTRIBDIR}/common/Makefile.makedev
2002-02-08 04:52:42 +00:00
64f10843ad
set TOP to ${.CURDIR}/.., and use that
2002-02-08 04:40:51 +00:00
db1902fd02
since we have ${TOP}, use it...
2002-02-08 04:37:25 +00:00
727ce6ba40
don't need REV and VER here anymore
2002-02-08 04:33:03 +00:00
2911ac7fbd
set DISTRIBDIR, DISTRIBREV, DISTRIBVER
2002-02-08 02:27:55 +00:00
39805e0285
- cleanup image device creation: add Makefile.makedev & list.makedev,
...
remove dist/*, now that they're not needed.
if MAKEDEVTARGETS is set, use MAKEDEV.wrapper and makedev2spec.awk to
create an mtree specfile containing the devices that would be made with
"etc/etc.${MACHINE}/MAKEDEV $MAKEDEVTARGETS".
otherwise, copy etc/etc.${MACHINE}/MAKEDEV to dev/MAKEDEV (via list.makedev)
- add mtree.common; contains directories used by all images, and optional
entries for dist/*
2002-02-08 02:18:53 +00:00
lukem