- Don't trust HA_ST_MORE again if the above situation occurs.
- Nuke bitfields in 'struct eata_sp'.
- Don't bother using scatter-gather if DMA map contains only 1 segment.
- Return TRY_AGAIN_LATER and not COMPLETE if an EATA command times out.
- Check SCSI status in dpt_inquire(), not just HBA status.
- Some cosmetic changes and sanity checks.
anything that might cause an interrupt (e.g. the SCSI bus reset in
ncr53c9x_attach()). If we don't do this, the initial interrupt is
lost, thus causing the state machine to never enter IDLE state, thus
causing SCSI commands to never be executed.
Fixes kern/8544, reported by Erik Bertelsen <erik@mediator.uni-c.dk>.
to be corrected. Text drawing is now improved significantly, but;
cursor is drawn incorrectly, copycols() trashes a screen, 'standout
(\033[7m)' results in lines reversed entirely until '\033[0m', and
possibly more issues. Not multi-colour, 8bpp only this moment. Costly
write memory barrier instrunctions should be eliminated using framebuffer
address aliasing technique for NetBSD/alpha.
and one which isn't. The latter is now used for ttyEcfg, enabling the
VT-switching ioctls to work on it. (This allows Linux X servers to work when
/emul/linux/dev/tty0 is linked to /dev/ttyEcfg.)
Avoid forwarding ip unicast packets which were contained inside
link-level multicast packets; having M_MCAST still set in the packet
header flags will mean that the packet will get multicast to a bogus
group instead of unicast to the next hop.
Malformed packets like this have occasionally been spotted "in the
wild" on a mediaone cable modem segment which also had multiple netbsd
machines running as router/NAT boxes.
Without this, any subnet with multiple netbsd routers receiving all
multicasts will generate a packet storm on receipt of such a
multicast. Note that we already do the same check here for link-level
broadcasts; ip6_forward already does this as well.
Note that multicast forwarding does not go through ip_forward().
Adding some code to if_ethersubr to sanity check link-level
vs. ip-level multicast addresses might also be worthwhile.
kill local definition of Debugger() - <sys/systm.h> DTRT
don't assume Debugger() is always available and put the call inside #ifdef DDB
Second part of a fix to PR #8637 by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
not set, unlock the vnode before calling the device's close routine and
relock it after it returns. tty close routines will sleep waiting for
buffers to drain, which won't happen often times as the other side needs
to grab the vnode lock first.
Make all unmount routines lock the device vnode before calling VOP_CLOSE().
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.
TODO:
o Conform to the KNF more strictly.
o Be unified with pcmcia code as much as possible.
o Add more drivers for CardBus card, such as APA-1480 or USB card.
The affected files are listed below.
sys/arch/i386/conf/files.i386
sys/arch/macppc/conf/files.macppc
sys/conf/files
sys/dev/ic/elinkxl.c
sys/dev/ic/elinkxlvar.h
sys/dev/ic/i82365.c
sys/dev/ic/i82365var.h
sys/dev/isa/i82365_isasubr.c
sys/dev/pci/files.pci
sys/dev/pcmcia/pcmcia.c
sys/dev/pcmcia/pcmciachip.h
The added files are listed below.
sys/arch/i386/conf/CARDBUS
sys/arch/i386/include/rbus_machdep.h
sys/arch/i386/i386/rbus_machdep.c
sys/arch/macppc/include/rbus_machdep.h
sys/arch/macppc/macppc/rbus_machdep.c
sys/dev/cardbus/if_ex_cardbus.c
sys/dev/cardbus/Makefile.cardbusdevs
sys/dev/cardbus/cardbus.c
sys/dev/cardbus/cardbus_map.c
sys/dev/cardbus/cardbusdevs
sys/dev/cardbus/cardbusdevs.h
sys/dev/cardbus/cardbusdevs_data.h
sys/dev/cardbus/cardbusvar.h
sys/dev/cardbus/cardslot.c
sys/dev/cardbus/cardslotvar.h
sys/dev/cardbus/devlist2h.awk
sys/dev/cardbus/files.cardbus
sys/dev/cardbus/if_fxp_cardbus.c
sys/dev/cardbus/pccardcis.h
sys/dev/cardbus/rbus.c
sys/dev/cardbus/rbus.h
sys/dev/pci/pccbb.c
sys/dev/pci/pccbbreg.h
sys/dev/pci/pccbbvar.h
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.
TODO:
o Conform to the KNF more strictly.
o Be unified with pcmcia code as much as possible.
o Add more drivers for CardBus card, such as APA-1480 or USB card.
The affected files are listed below.
sys/arch/i386/conf/files.i386
sys/arch/macppc/conf/files.macppc
sys/conf/files
sys/dev/ic/elinkxl.c
sys/dev/ic/elinkxlvar.h
sys/dev/ic/i82365.c
sys/dev/ic/i82365var.h
sys/dev/isa/i82365_isasubr.c
sys/dev/pci/files.pci
sys/dev/pcmcia/pcmcia.c
sys/dev/pcmcia/pcmciachip.h
The added files are listed below.
sys/arch/i386/conf/CARDBUS
sys/arch/i386/include/rbus_machdep.h
sys/arch/i386/i386/rbus_machdep.c
sys/arch/macppc/include/rbus_machdep.h
sys/arch/macppc/macppc/rbus_machdep.c
sys/dev/cardbus/if_ex_cardbus.c
sys/dev/cardbus/Makefile.cardbusdevs
sys/dev/cardbus/cardbus.c
sys/dev/cardbus/cardbus_map.c
sys/dev/cardbus/cardbusdevs
sys/dev/cardbus/cardbusdevs.h
sys/dev/cardbus/cardbusdevs_data.h
sys/dev/cardbus/cardbusvar.h
sys/dev/cardbus/cardslot.c
sys/dev/cardbus/cardslotvar.h
sys/dev/cardbus/devlist2h.awk
sys/dev/cardbus/files.cardbus
sys/dev/cardbus/if_fxp_cardbus.c
sys/dev/cardbus/pccardcis.h
sys/dev/cardbus/rbus.c
sys/dev/cardbus/rbus.h
sys/dev/pci/pccbb.c
sys/dev/pci/pccbbreg.h
sys/dev/pci/pccbbvar.h
so we'll know when it's time to switch from 'slow' command mode to normal.
Change some settings for configuration printfs and debug levels. Redo the
internal ispscsicmd return definitions and let isp_cmd translate them as
approrpriate to NetBSD values. Remove the inline functions from here- they're
now in isp_inline.h. Put in the start of the correct SWIZZLE/UNSWIZZLE
functions.
Redo how we start commands- do a 'slow' start function which then
looks to see when we're done the configuration process at which point
it *then* enables sync/wide mode. Set the max openings amount to the
true max openings- not a synthetic. Add a timeout driven command requeue
function so that Loop Down events well freeze things until a later point
in time where they might be restarted.
isp_fastpost_complete function to include a handle. Do some
isr register debouncing. Use new inline functions for xflist
handle storage. Remove isp_dumpxflist function. Do some fixups
of NVRAM from some broken cards. Use Full Login after LIP option
for FC cards if f/w < 1.17 - there's a f/w bug that causes the
port database to not be actually refreshed for local loop devices!
Do the appropriate endian swizzling for the ICB. Ditto for SNS structures
(these are no-ops until UltraSparc PCI needs them).
defines to get max luns for a card. Make sure the RESULT_QUEUE_LEN is not less
than 64- I've seen breakage with that. Move the temp port database stuff
into the softc (ick). Remove most of the target mode stuff. Make xflist
storage an external outer layer thing (since it will now be allocated based
upon the maximum commands that this HBA can support rather than request
queue size).
back into the packet. (ip_output() clears it since ipsec reuses that
packet field in the output path. by putting it back, we're going to
pretend we're back on the input path now).
the correct "read eeprom" opcode on the RoadRunner (which has a larger
EEPROM, and thus needs a different opcode to make room for the larger
offsets).
- Reset and enable the MII before probing for PHYs, and reset and enable
the MII in epinit().
- Be more conservative when resetting the interface after a transmit error.
Based on PR #8331, from Ryoji KATO.
Closer on 3c574, probably will work fine with the 3CCFEM556BI (which
won't have an older rev TDK Semi PHY, and which was tested by the author
of the PR).
make ntfs_ntref() real function and properly lock ip->i_interlock when
updating ip->i_usecount
g/c ntfs_uustricmp()
make ntfs_uastr[i]cmp() static, rename arguments to be a bit more mnemonic
add couple of casts to NTFS_TOUPPER() and ntfs_uastr[i]cmp() - this
corrects couple of cases when open()/stat() failed for
files which apparently existed and even showed in ls output
ntfs_ntlookup(): initialize ip properly if ntnode is found in hash table,
so that debug prints doesn't print garbage in that case
some whitespace policy
With nfsv2, the nfsm_reply() macro always causes the service routine
to return if error was nonzero.
With nfsv3, we can keep going after nfsm_reply() without returning,
but nqnfsrv_getlease() didn't take this into account, so add a
return(0) after each error-case nfsm_reply(0).
stack-allocate a sockaddr_storage for the temporary sockaddr rather
than putting it in an mbuf.
neighbor discovery wants to delete expired ifa's from a timeout
handler. allowing rtinit(RTM_DELETE, ...) to run at interrupt level
allows this to work.
i think we can afford the extra ~128 bytes of stack depth ..
