26d692df9e
Use DHCP, not BOOTP. At least with dhcpd, the root path gets dropped due to
...
lack of space in the reply when using BOOTP.
2000-04-29 22:18:31 +00:00
f51470a514
Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
...
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
2000-04-29 03:31:45 +00:00
151b83e2e1
Add ex* at pci and rtk* at pci.
2000-04-25 16:05:06 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
7865e586d3
Typo in comments. (Zilog 8350 -> 8530)
2000-04-14 13:29:57 +00:00
dd83a9aa4f
Make this compile.
2000-04-14 10:22:06 +00:00
2ca39ceddf
Make this compile again.
2000-04-07 14:35:58 +00:00
9a31a8c77f
Add atapibus* at umass?
2000-04-03 00:03:28 +00:00
b18b370715
Make sure color rgb:0/0/0 is black.
2000-04-02 12:53:05 +00:00
7df13bfec7
Enable wdc1 (needed on StarMax).
2000-04-02 12:36:38 +00:00
e352cada4b
Make this compile again.
2000-04-02 12:03:04 +00:00
230876cf26
Merge parts of chs-ubc2 into the trunk:
...
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
2000-03-26 20:42:21 +00:00
ffdaae73e0
Enable gmac ethernet.
2000-03-26 09:16:01 +00:00
f8a898cb1d
Use ring buffer on tx side, too.
2000-03-26 09:15:17 +00:00
5684221bbd
esp declaration was moved to conf/files.
2000-03-26 08:34:20 +00:00
d806694e39
Fix typo.
2000-03-26 08:29:12 +00:00
b7570cae85
Update several ports to at least work again without IPKDB
...
after the update of that.
Sorry for breaking this with my last changes :-(.
Fixes PR#9671 by Lennart Augustsson.
2000-03-24 17:05:30 +00:00
7b918b4088
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 06:40:33 +00:00
7c35662066
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.
2000-03-22 00:58:16 +00:00
e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
0bcbafe0ee
Correct the number of arguments to wsdisplay_set_cons_kbd(), for the
...
changes I made for cnbell().
2000-03-09 18:59:27 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
30370336dc
Use ring buffer on tx side, too.
2000-03-04 11:17:00 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
0468fe97e4
Don't use hardcoded speed value when this is a console. Instead, read
...
from zs. (because OF-3.x uses 57600 bps)
2000-02-27 20:31:57 +00:00
f101e8315f
Add gmac. (commented out)
2000-02-27 18:06:43 +00:00
6f4bb03178
Initial version of gmac ethernet driver.
...
XXX doesn't work well yet.
2000-02-27 18:00:55 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
0b8b55beaf
Add uninorth. Now iMac DV and Power Macintosh G4 should run NetBSD.
2000-02-14 14:57:52 +00:00
2750c23cdd
Add minimal support of openpic.
2000-02-14 12:45:52 +00:00
2aafd71ec7
Reduce NKMEMPAGES_MAX_DEFAULT.
2000-02-13 17:01:47 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
d696094217
Change ICU_LEN to 64.
2000-02-11 13:15:43 +00:00
1dc2d9d399
Don't display "NetBSD disklabel". This message appears too many times
...
if more than two or three disks exist.
2000-02-10 12:33:45 +00:00
502ad73200
Add wsfont options.
2000-02-09 13:10:15 +00:00
dcb9f03bd3
Use dev/rasops instead of dev/rcons.
2000-02-09 13:08:35 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
a62753d0b7
Make OF-2.x can also find root device.
2000-02-08 20:02:13 +00:00
b933f19ea2
Flush cache before rebooting to preserve msgbuf.
2000-02-08 12:57:11 +00:00
d97ae29629
Enter power saving mode in idle loop on 603, 750, and 7400.
...
603 uses doze mode, 750 and 7400 use nap mode.
2000-02-08 12:49:06 +00:00
9cba8a13d1
Use -Os -mmultiple to reduce size.
...
Add cbb and pcmcia/cardbus devices.
Nuke BUFPAGES=800 kludge.
2000-02-08 12:13:50 +00:00
c7d216c2da
Add missing locators.
...
Add tlp at cardbus.
2000-02-08 12:10:56 +00:00
45fe0e4077
Fix typo.
2000-02-08 08:08:43 +00:00
b9ff560bcc
Don't print "... not configured" message for non real devices
...
like escc-legacy.
2000-02-07 20:30:05 +00:00
cf532aa7eb
Move CFLAGS and CPPFLAGS to {bootxx,ofwboot}/Makefile to compile installboot
...
without -D_STANDALONE.
2000-02-07 16:26:59 +00:00
mycroft