Commit Graph

2091 Commits

Author SHA1 Message Date
simonb e60403a3f9 Remove rz/tz support for pmax, switch to MI SCSI. 2001-08-26 11:55:38 +00:00
eeh 97ff24357e Clean this up so it works again. 2001-08-26 05:31:28 +00:00
mrg a826a2ecf0 clean up a bit; also fix a snap_pre_md segment to be in snap_md_pre so it is actually executed. 2001-08-23 16:01:56 +00:00
mrg 5b9869d189 don't clobber INSTALLATION_DIRS, just add to it. add support for building
32 bit libraries, crt and ld.elf_so on 64 bit platforms (disabled by default).
2001-08-23 14:40:21 +00:00
mrg 31be837848 support kernel configs called `../../sparc64/conf/GENERIC32', and the like,
by stripping the dirname off by using ${configfile:C/.*\///} where necessary.
2001-08-23 14:37:02 +00:00
wiz 8624e48221 Add /usr/share/man/{cat,man}8/netwinder. 2001-08-23 01:35:36 +00:00
matt 44c7bc97b4 Add some etc.netwinder support for netwinder. XXX Far from complete
but makes snapshots possible.
2001-08-22 18:34:48 +00:00
yamt 4f36ab62b6 chown user.group -> chown user:group
according to cvs log of basesrc/etc/etc.sun3/ttyaction and
archive of source-changes, it was backed out with MAKEDEV
because of portability issue.
but i think ttyaction doesn't have that issue as it's never
executed on non-NetBSD environment.
2001-08-21 15:16:59 +00:00
mrg bf0195348a the installation directory is called miniroot not xminiroot. 2001-08-19 14:18:39 +00:00
ad e74599e179 Make newsyslog at boot optional, as it should have been. 2001-08-18 19:50:19 +00:00
wiz 8d6595d978 Add /usr/share/man/{man,cat}4/sun2 2001-08-17 07:15:12 +00:00
lukem e2773e5d61 run fsck with "-n -f" instead of just "-n"; recent changes to fsck
mean that file systems mounted read-write are skipped unless -f is given.
problem noted by andrew brown.
2001-08-09 15:30:30 +00:00
lukem ed97fbd98d create /var/named 0755 root:wheel instead of 0750 root:named 2001-08-09 01:32:46 +00:00
matt 799202c512 Fix botched commit (a conflict was committed). 2001-08-05 03:37:37 +00:00
tsutsui e6b1a09d07 Use "mtree -U" instead of "mtree -u" on making distrib-dirs
to ignore file hierarchy unmatches and check exit status of mtree
to detect actual errors on it (like "unknown user/group" etc).
2001-08-04 18:41:18 +00:00
garbled d472541074 And add sshdconf here too. Christ there are alot of files to update. 2001-08-02 05:47:59 +00:00
ad aaf3c7c88b Hook in the mly control interface on i386. 2001-08-01 20:54:16 +00:00
wiz d2b1c33dc5 Undo last: glob(3) isn't used for _whatdb (yet?).
[broke e.g. installation of devel/netcdf]
2001-07-29 15:50:29 +00:00
wiz a9356936b4 seperate -> separate 2001-07-22 13:33:58 +00:00
jdolecek 5241fef795 add INSTALL_PS2 to BUILD_KERNELS 2001-07-21 13:38:22 +00:00
eeh 9d85345191 Build an INSTALL kernel too. 2001-07-21 05:58:28 +00:00
fredette b8927f0fc1 Renumbered the minors on the tty devices now that
the keyboard and mouse are on ttys now.
2001-07-13 03:24:49 +00:00
lukem 458d1a2516 After itojun's recent RTF_CLONED and other changes, it's not necessary to
add a route from an alias address to 127.0.0.1, so remove that code.
It's still necessary to configure lo0 -> 127.0.0.1 though, so emphasize that.
2001-07-08 07:16:00 +00:00
skrll c7ba90b340 Don't list uk twice. 2001-07-06 07:45:47 +00:00
tron 3543e0f5fa Start "ipmon" with option "D" for daemon mode instead of starting it
in a subshell.
2001-07-05 05:26:57 +00:00
joda b53f2df0b2 add AFS services, mostly from IANA 2001-07-02 16:07:04 +00:00
lukem c46620e9a9 take advantage of glob(3) support when defining _whatdb 2001-06-25 21:38:29 +00:00
veego 797097c7d1 Another place where primes was used. Change it to moduli. 2001-06-24 17:28:05 +00:00
itojun ca02da9f00 pim6dd.conf is gone. primes -> moduli (openssh) 2001-06-23 22:07:06 +00:00
tv 6a7dd372b3 Do what we should have been doing long ago; use /dev/console by default as the
boot console tty, so that the console is on the same place that the kernel
dmesg output goes, whether wscons or serial.  Users who want to use tty00
or ttyE0 explicitly can change /etc/ttys themselves.

Also use "vt100" as terminal type for /dev/console (for a reasonable baseline
that also works with wscons; pccons is long since no longer default).

This addresses PR install/13249, i386-specific, but may be appropriate to
apply to all ports.
2001-06-19 20:06:46 +00:00
lukem 684e89f355 use mktemp(1) to create temporary directories, and ensure that cleanup traps
are setup asap.
2001-06-18 10:54:02 +00:00
lukem 50aa483991 Improve run_rc_script():
- Skip files that end with `~', `#', `.OLD' or `.orig', as these are usually
  scratch or backup files created by programs, and we don't want to start them.
- Only try and run non `.sh' files if they're executable.

Per discussions with Andrew Brown, and closing his PR [bin/9981].
2001-06-18 06:53:45 +00:00
lukem f27a0c8f42 Now that "fsck -p" skips file systems that are mounted read-write,
always perform the disk check (unless /fastboot exists).  Previously
this would only occur when booting directly to multi-user, so the
fsck wouldn't happen after a single user boot going into multi-user.
2001-06-18 06:42:35 +00:00
jdolecek e3dc57afeb Make also ed1 for 'all', create ed0, ed1 for 'floppy' 2001-06-17 11:48:09 +00:00
lukem d7d9b87b1c Complain if $amd_master is set. This variable was used in 1.5 and prior
releases, but has been ignored since an am-utils update six months ago.
This fixes [misc/11971] submitted by Jun-ichiro itojun Hagino.  (Note that
$amd_flags is still supported, contrary to what the PR says).
2001-06-17 01:05:40 +00:00
lukem 919eb089e2 change mountd to use its own $mountd variable (instead of $nfs_server).
nfsd will complain if mountd isn't set.  from [misc/13135] by Johnny C. Lam.
2001-06-16 06:13:09 +00:00
lukem 586521f84e - Implement an optional global watchdog timeout for rc.shutdown, which is
enabled by setting $rcshutdown_timeout to a number of seconds to wait for
  before terminating rc.shutdown.  This is disabled by default.
- Use symbolic names rather than numbers when defining a trap.
- Improve some comments.
2001-06-16 04:09:19 +00:00
lukem bd7fad6c47 use symbolic signal names instead of numbers 2001-06-14 07:50:06 +00:00
simonb a0a111aa26 Add support files for the Walnut. 2001-06-13 15:13:24 +00:00
simonb d201b0b96b Add support files for the Walnut. 2001-06-13 14:53:29 +00:00
chris ecc1e181a0 Checking support for fcom to arm32 MAKEDEV, fixes pr 11076. 2001-06-10 22:07:23 +00:00
chris 68536ce2c4 Fix arm32 MAKEDEV, the script for handling ttyv had a typo. 2001-06-10 22:05:44 +00:00
kim a81dea8eca Remove duplicate usr/share/man/cat8/news68k added in revision 1.159... 2001-06-08 21:16:15 +00:00
kim 8966f5524c not usr/share/man/cat8/new68k but usr/share/man/cat8/news68k 2001-06-08 21:13:23 +00:00
tron a35d0a5c89 Add missign directory "./usr/share/man/cat8/news68k". 2001-06-08 16:45:37 +00:00
wiz 5fc8a3a2c4 Remove empty sections (confuse MAKEDEV2manpage) 2001-06-08 14:43:20 +00:00
wiz cffe2f2fdb Add some more arch-specific man8/cat8 subdirs. 2001-06-08 14:24:44 +00:00
wiz ed9cc9d27c scsi(4), not scsi(8) 2001-06-08 14:17:41 +00:00
rafal c9d0f70329 Fix typoe in Jason's last change. 2001-06-08 01:34:36 +00:00
thorpej 17207724f6 Update the console entries for new tty names. 2001-06-07 20:16:55 +00:00