kristerw
cc2b58be2a
Prevent gdb from getting stuck in _PROCEDURE_LINKAGE_TABLE_ ()
...
Closes my PR bin/6323.
1998-11-21 23:43:48 +00:00
jonathan
0244692638
patch solib.c from gdb 4.16 to work around non-relocation and
...
misfeatures with ELF on mips. Without this, gdb gets addresess in
shared-libraries wrong and reports `heuristic fencepost' error.
(cf. the special-case solib functions duplicated in irix5-nat.c.)
1998-10-30 06:33:00 +00:00
mark
ec628f2561
Update for machine/setjmp.h change (JMPBUF* -> _JB*)
1998-08-04 02:03:08 +00:00
bouyer
b2dd67104a
Document the fact that -w is now a sinonym for --window. Writing in the
...
executable is enabled with --write. Closes PR 5533.
1998-07-27 12:42:05 +00:00
tv
b6ace53b3a
Allow mips{eb,el}-*-netbsd* in configuration, setting default accordingly,
...
and make mips-dec-netbsd* an alias for mipsel-*-netbsd*.
1998-07-27 01:44:10 +00:00
mycroft
8f16870c20
const poisoning.
1998-07-26 17:11:42 +00:00
mycroft
0a2cb6aaab
const poisoning.
1998-07-26 17:05:05 +00:00
mycroft
49031b1376
const poisoning.
1998-07-26 16:56:51 +00:00
mark
5375ce1cdd
Remove junk related to KERNEL_U_SIZE.
1998-06-27 19:37:15 +00:00
mark
a1e48b9cd9
Fix definitions of ADDR_BITS_REMOVE for 32 bit addresses rather than
...
26 bit.
1998-06-27 19:35:17 +00:00
mark
aa00a3d8c7
Axe redundant file.
1998-06-27 19:33:59 +00:00
mark
d4ac65004d
Include machine/setjmp.h for JMPBUF_REG_R14 definition.
...
Define SIGTRAMP_START, SIGTRAMP_END and SIGCONTEXT_PC_OFFSET here.
Include arm/tm-armnbsd.h rather than arm/tm-armbsd.h
1998-06-27 19:33:09 +00:00
mark
bbd80550e6
Use ADDR_BITS_REMOVE macro rather than using a hardcoded mask when
...
calculating program counter addresses.
1998-06-27 19:30:01 +00:00
gwr
c0fde6edd3
Avoid unnecessary calls to fetch_inferior_registers() by calling
...
registers_fetched() at the end of store_inferior_registers().
By definition, our copy of the register set is up-to-date
at that point, so let the common gdb code know that.
1998-06-16 18:39:04 +00:00
gwr
faf0c21368
fetch_core_registers gets all the registers in one call.
1998-06-16 18:31:48 +00:00
tv
da925af9ad
Integrate NetBSD arm32 diffs for gdb. Now compiles and works `out of the
...
box'. Use new GNU_ARCH remapper.
1998-05-22 17:17:59 +00:00
mycroft
c0de9013ee
Fix a syntax error.
1998-05-06 11:22:07 +00:00
tv
482063559a
.y.c <sys.mk> rule fixes. Don't create a y.tab.h file unless asked for,
...
and use smarter creation of the header file.
1998-04-09 00:32:31 +00:00
mycroft
111c2f97a8
Support higher baud rates.
1998-04-02 10:32:04 +00:00
matthias
58b2f0ab4c
Ian Dalls patches to make gdb work with respect to his modifications
...
to gcc to support the ns32381's additional floating point registers.
1998-03-13 22:01:07 +00:00
gwr
e069ed37b2
Use mipsnbsd-nat
1998-02-08 01:10:06 +00:00
gwr
6b14dcf593
Kill an unused variable.
1998-02-07 23:03:16 +00:00
gwr
d9d32203ff
New implementation of NetBSD/alpha support.
...
(so we can submit it to the FSF.)
1998-02-07 22:54:50 +00:00
gwr
986ac75a1f
Kill private version of child_resume().
1998-02-03 21:35:30 +00:00
gwr
f4ecc595c4
If NO_SINGLE_STEP is defined, make sure child_resume
...
is never asked to single step!
1998-02-03 21:24:16 +00:00
thorpej
6786eca4a0
Fixup NetBSD/powerpc GDB host and target configurations.
1998-01-30 22:26:42 +00:00
thorpej
ade3355927
Add the profile registers. From Wolfgang Solfrank.
1998-01-30 20:00:43 +00:00
thorpej
5b3cc1e576
Remove SIM and SIM_OBS definitions from these files, since we now use
...
AC_SUBST to configure the PSIM simulator. Add an comment noting that
these files are now obsolete (they are different from the ppc*-eabi.mt
files only by this comment).
1998-01-30 19:56:06 +00:00
thorpej
c0aeb102bc
Add powerpc-*-netbsd* host and target.
1998-01-30 19:53:20 +00:00
thorpej
dd2f604092
Clean up the configure code that enables the PowerPC simulator PSIM. Instead
...
of overriding the target to ppc-sim if the simulator is enabled, allow
the simulator to co-exist by AC_SUBST'ing in the SIM and SIM_OBS variables.
1998-01-30 19:50:48 +00:00
mycroft
02b075bafe
Make `info float' work. Mostly from Noriyuki Soda.
1998-01-24 15:32:41 +00:00
gwr
15d917d9fe
MMALLOC_DIR and MMALLOC_CFLAGS are now substitited by configure.
1998-01-22 01:34:29 +00:00
gwr
7d3ce87895
Add support for the option: --with-mmalloc=somewhere
...
which defaults to using ../mmalloc if that exists, or
else it sets MMALLOC_CFLAGS = -DNO_MMALLOC
(so build without ../mmalloc "just works":)
1998-01-22 01:32:00 +00:00
gwr
4fea918e34
For completeness, fix the SunOS/sun3 sigtramp support too.
...
(I had to change tm-m68k.h which affects tm-sun3.h also.)
1998-01-14 18:51:06 +00:00
gwr
254db76f83
Define IN_SIGTRAMP() as nbsd_in_sigtramp(), which knows how to find
...
the address of the signal trampoline on all NetBSD/m68k machines.
(Fixes PR bin/3391)
1998-01-14 18:45:44 +00:00
gwr
eba66671ed
Define FRAME_SAVED_PC to use the common sigtramp_saved_pc() just like
...
the i386 does. The previous definition was a SunOS-specific hack,
and if that is really still needed somwhere, it can still be used
by defining sigtramp_saved_pc as m68k_sigtramp_saved_pc in the
target-specific tm.h file. The common sigtramp_saved_pc() fucntion
uses SIGCONTEXT_PC_OFFSET to find the return PC (the best way).
Do not define SIG_PC_FP_OFFSET here. (very machine-specific!)
1998-01-14 18:42:05 +00:00
gwr
6cc4f2227c
Add two new functions:
...
m68k_sigtramp_saved_pc() - like the comon sigtramp_saved_pc, but
uses SIG_PC_FP_OFFSET to find the saved PC (used for SunOS).
nbsd_in_sigtramp() - determine whether a PC value is within the
signal trampoline, but do so WITHOUT hard-coding the address
of the end of the stack (uses "__ps_strings" at run time).
This allows a common gdb to work on all m68k. (yea!)
1998-01-14 18:33:10 +00:00
gwr
521ae36095
No longer need to include solib.h here.
1998-01-12 19:49:14 +00:00
gwr
85ec3a65c8
Uh... tabs vs spaces...
1998-01-12 16:22:01 +00:00
gwr
734fb3d7c0
Fix the comment that claims "only SunOS" needs this (referring to the
...
extra initial SIGTRAP after ld.so finishes). NetBSD needs it too.
1998-01-12 16:21:14 +00:00
gwr
c7f6e84cbe
Ignore symbols of type N_WARNING (0x1e) on NetBSD.
1998-01-12 16:14:58 +00:00
gwr
98e7377438
OK, this file was pretty much completely wrong. I copied it from the
...
SunOS version, but our shared libraries are not THAT much like SunOS.
In NetBSD a.out shared libraries, trampoline stubs have _DYNAMIC+n
as their symbol, so we can recognize them with strcmp. We may also
need SKIP_TRAMPOLINE_CODE(pc) eventually, but doing that right takes
machine dependent code to lookup what the _DYNAMIC stub jumps to.
(gdb appears to work OK on a.out without SKIP_TRAMPOLINE_CODE)
1998-01-12 16:03:28 +00:00
thorpej
f6b272d632
Define S0_REGNUM, the first callee-saved register.
1997-12-17 03:01:04 +00:00
thorpej
510a4a1282
Add _rtld_debug_state to the list of symbols where GDB may stop the
...
dynamic linker.
1997-12-17 02:48:23 +00:00
thorpej
e7965747fa
Add configuration information for NetBSD/alpha.
1997-12-17 02:44:14 +00:00
jonathan
5438df9f2f
Correct offset and size of register-copying code in fetch_inferior_registers()
...
and set_inferior_regsiters() to match the split scalar/FP register structs.
Based on fetch_core_registers.
Fixes some but not all of PR 4589.
1997-12-03 16:00:14 +00:00
matthias
ceeae92e78
Pull over changes for ns32k from our old gdb port.
1997-11-26 21:29:30 +00:00
phil
7f2f468376
Add needed functions for linking.
1997-11-16 06:59:09 +00:00
gwr
a46d55768b
Integrate a fix from the latest GDB: Need to initialize the
...
"endian" field in the "disassemble info" otherwise the SPARC
disassembler assumes it should do little-endian swap. (dumb)
1997-11-12 17:34:41 +00:00
bouyer
1352a07d69
Patch from Jason Thorpe: add a --write option, equivalent to the
...
"set write" command, for ease of use and compatibility with old gdb.
1997-10-30 10:39:53 +00:00