If we're handling system management interrupts ourselves, the system locks
solid when the ACPI timer SCI fires. Disable this interrupt so we can have
an uptime of more than ~10 minutes.
fileassoc_table_add() was removed from the KPI and made internal. From now
fileassoc(9) will manage the optimal table size internally.
Input from and okay yamt@.
The "pci0 dev 1 function 2" aka "System Management" on the nForce chipset
isn't detected on the Xbox. If XBOX is defined and arch_i386_is_xbox is
true, force intrline to 12 and map the system management IO space at
0x8000. We can now call iic_smbus_intr when a system management interrupt
takes place.
While we're here, make amdpm_smbus honour the I2C_F_POLL flag.
The Xbox no longer resets when you press the eject button.
both NPTL and old linuxthreads behaviour depending on process needs.
Apply to exit_group(), getpid() and getppid() to share them between
compat linux32 (non NPTL) and compat linux (NPTL) on amd64.
ok by manu and christos
writes they might issue to be delayed which keeps us from deadlocking
- don't splhigh() in cuda_intr() - usually we're there already. Instead do
the splhigh()/splx() dance when we're polling
- remove some leftover debugging gunk
From John Nielsen on freebsd-mobile.
Not tested, but almost certainly better than attaching as ugen.
FreeBSD has a UQ_ASSUME_CM_OVER_DATA quirk for this device; I can't
figure out what that means.
Most Cardbus bridges supported by pccbb(4) fire a power-cycle
interrupt when the power state of a cardslot changes from 'off' to
'on'. TI bridges fire a power-cycle interrupt on both on->off and
off->on changes.
When pccbb_power() powered-down a cardslot, it did not wait around
for the power-cycle interrupt. When pccbb_power() powered-up a
cardslot, it did wait for the interrupt. If a pccbb_power(UP)
followed a pccbb_power(DOWN) very closely, pccbb_power() used to
interpret the power-cycle interrupt for the up->down transition as
"power-up complete," read the power-state bit and, finding that
power had NOT been activated, complain, "cbb0: power on failed?"
Then pccbb_power() exited before power-activation was complete,
falsely indicating that the power-activation *was* complete. After
that, a driver attach/enable routine would blithely configure a
card that was not fully powered-up. An operator who ran a command
such as 'ifconfig rtw0 down up' or 'ifconfig ath0 down up' would
read 'cbb0: power on failed?' in the system log, and their NIC
would misbehave.
This excerpt from a comment in the source should suffice to explain
how I fixed the bug,
/*
* Wait as long as 200ms for a power-cycle interrupt. If
* interrupts are enabled, but the socket has already
* changed to the desired status, keep waiting for the
* interrupt. "Consuming" the interrupt in this way keeps
* the interrupt from prematurely waking some subsequent
* pccbb_power call.
And this explains why this patch will work for Ricoh bridges that
do not fire an interrupt on the on->off transition:
* XXX Not every bridge interrupts on the ->OFF transition.
* XXX That's ok, we will time-out after 200ms.
*
* XXX The power cycle event will never happen when attaching
* XXX a 16-bit card. That's ok, we will time-out after
* XXX 200ms.
*/
M. Warner Losh and Charles M. Hannum provided valuable input on
this patch.
- don't use SAVESTART in calls to relookup() from unionfs,
just vref() the desired vnode when we need to.
- fix locking and refcounting in the unionfs EEXIST error cases.
- release any vnode locks before calling VFS_ROOT(), vfs_busy() is enough.
this allows us to simplify union_root() and fix PR 3006.
- union_lock() doesn't handle shared lock requests correctly,
so convert them to exclusive instead. fixes PR 34775.
- in relookup(), avoid reusing "dp" for different purposes,
the error handling wasn't right. (actually just get rid of dp.)
also, change relookup() to ignore LOCKLEAF and always return the
vnode locked since the callers already expect this.
