gwr
d7e49b6a5b
Make comments refer to GENERIC3X, not GENERIC
1998-03-08 19:33:09 +00:00
gwr
9c0c7119c3
Leaner configurations for the installation media.
...
(Small enough to work on all machines.)
1998-03-08 19:29:40 +00:00
gwr
b043198b53
Sync with sun3/machdep.c (should factor out common stuff...)
...
> Do the "early breakpoint" (if booted with "-d") even if we
> have only the PROM to handle it, so one can patch things.
1998-03-08 19:12:53 +00:00
gwr
7db30c0844
Do the "early breakpoint" (if booted with "-d") even if we
...
have only the PROM to handle it, so one can patch things.
1998-03-08 19:09:58 +00:00
gwr
d342d51752
Fix comments
1998-03-08 18:56:08 +00:00
gwr
4242e2ab10
No need for default base addresses here anymore.
1998-03-08 18:54:23 +00:00
gwr
5242b3b02a
Need to use an offset to map the colormap H/W now that the
...
config address is that of the P4 register. Oops.
1998-03-08 18:53:17 +00:00
kleink
f5c77ddbbc
Fix a whitespace botch.
1998-03-08 15:12:49 +00:00
mrg
c6dd5cbefd
standardise options header includes.
1998-03-08 14:04:14 +00:00
christos
509cb1d75f
- remove duplicate setting of CCR
...
- fix debugging code so that it compiles
- reorder the disabling code so that it is more logical
- add splhigh()/splx() in the first establish setting for symmetry
1998-03-07 17:58:17 +00:00
augustss
a294c3fef3
Regen.
1998-03-07 16:48:47 +00:00
augustss
8dd96862cd
Add Matrox Millenium II AGP.
1998-03-07 16:43:46 +00:00
scottr
8840acb1e2
Quirk table entries for IBM H3171 and Quantum ELS85S disks.
1998-03-07 06:34:59 +00:00
thorpej
b3d7fd8f3f
Just use vtophys() to get the PCB phys addr.
1998-03-07 04:20:45 +00:00
thorpej
9c236919e9
Rewrite pmap_extract(), and use it as appropriate in vtophys() rather
...
than (almost) duplicating the code.
1998-03-07 03:37:02 +00:00
thorpej
cd7d081d02
Export a pointer to the Virtual Page Table.
1998-03-07 03:15:43 +00:00
thorpej
f7d64ef778
Clean up a comment.
1998-03-07 03:15:06 +00:00
thorpej
f55b280ffc
Clean this up a bit.
1998-03-07 01:44:08 +00:00
thorpej
dcbc04e7af
Rename Sysptmap and Sysmap to Lev2map and Lev3map, respectively, and
...
add some comments describing in better detail what they are and how they
are used.
1998-03-07 01:43:54 +00:00
thorpej
60e6d2e48f
Update a comment in pagemove().
1998-03-07 01:26:04 +00:00
thorpej
ff155df72a
Nuke kvtopte(). Also, change pagemove() to lookup the from and to PTEs
...
in each iteration of the loop, since PT pages may not necessarily be
contiguous.
1998-03-07 01:11:39 +00:00
thorpej
60d30d3838
Nuke kvtopte() and ptetokv().
1998-03-07 01:10:05 +00:00
thorpej
58a7bd9288
Nuke the vatopa() macro.
1998-03-07 00:42:07 +00:00
thorpej
059d0c72de
pmap_ste() -> pmap_l2pte(), pmap_pte() -> pmap_l3pte()
1998-03-06 23:41:01 +00:00
thorpej
8081bd3017
Move pmap_pte*() macros into the header file, nuke pmap_ste_v(), add
...
pmap_lev1pte().
1998-03-06 23:19:26 +00:00
thorpej
5a34bf2a24
Add Dayna CommuniCard E, from Havard Eidnes, PR #5120 . Also, remove a
...
few unnecessary/no-longer-completely-accurate comments.
1998-03-06 20:00:28 +00:00
cgd
ff06be8ce0
reorganize mapping/attachment of wdc channels so that it'll be easier to
...
insert a check to see whether a channel appears to be enabled. Shouldn't
be necessary, according to the spec, but some PC chipsets allow individual
compatibility channels to be disabled. "I hate PCs."
1998-03-06 19:13:19 +00:00
cgd
f528463b81
despite the spec, some people map the bus master IDE registers into
...
memory space. Note that in a comment, but don't try to fix it (for now).
1998-03-06 17:41:59 +00:00
drochner
84963f97b5
Move allocation and mapping of the page table page for "bioscall" from
...
locore to here.
1998-03-06 14:53:06 +00:00
drochner
25f48b177c
Use NKPDE page table pages (instead of only one) for temporary mapping
...
in transition to relocated mode.
Remove preparation for "bioscall" identity mapping - it is in the way
and can be done later in init386().
Should solve the problem described in PR 4832 and 5102.
1998-03-06 14:51:36 +00:00
tsubai
2630ce2157
label 1: within #ifdef pmax is referenced from outside.
...
so it didn't work without -Dpmax.
1998-03-06 13:54:02 +00:00
fvdl
6e434a4386
Make this compile again.
1998-03-06 09:06:51 +00:00
jtk
4fcd1c2cdd
include <machine/vm86.h> if VM86 option defined
1998-03-06 04:12:56 +00:00
thorpej
92abc814ff
Clean this up a bit.
1998-03-06 00:21:40 +00:00
wrstuden
6dcfc62169
KNF last change
1998-03-05 22:56:18 +00:00
thorpej
8118bb3984
Make this compile again in light of Lite2.
1998-03-05 22:51:35 +00:00
thorpej
c5ecc8ab11
Arrgh, I said "abort", dammit...
1998-03-05 22:49:20 +00:00
thorpej
dfdde49707
*** empty log message ***
1998-03-05 22:48:34 +00:00
wrstuden
84c6b9dbd7
Make zs_iflush not loop indefinitly. Some Mac PowerBooks lie about having
...
two SCC channels, and can get stuck in an infinite loop. This change
stops after flushing 4 bytes. Might need upping to 8 bytes if we support
85230 ESCC's.
Idea bounced off of scottr & gwr
1998-03-05 22:03:34 +00:00
tsubai
10f8023240
Added arch/newsmips/Makefile.
1998-03-05 15:03:20 +00:00
scottb
d24f809241
Added prototype for ibcs2_sendsig.
1998-03-05 05:23:49 +00:00
scottb
297f065eec
Duplicated null cookiebuf check from ibcs2_sys_getdents to ibcs2_sys_read.
1998-03-05 04:49:50 +00:00
scottb
8adcd13408
Fixed incorrect assumption that svr4_semctl is passed a 'union semun' pointer
1998-03-05 04:42:49 +00:00
scottb
9273595150
Added support for ibcs2_sigcode.
...
Added new emulation structure, emul_ibcs2_xout, for XENIX.
Modified some syscalls to differentiate between XENIX and UNIX.
Fixed major bug in semaphore structure emulation size and conversion.
Check and cleanup copyin/copyout usage.
Add xenix_sys_locking patches from Andreas Wrede <andreas@planix.com>.
1998-03-05 04:36:07 +00:00
scottb
498bb9530b
Modified compat_10_sys_semsys to correctly read in a union arg (a5)
...
and pass a union pointer arg to sys___semctl
1998-03-05 04:26:35 +00:00
scottb
b8bb612601
Add ibcs2_sendsig function.
...
Add ibcs2_sigcode function to locore because we need to call our own
version of sigreturn.
Add support for emul_ibcs2_xout (XENIX) structure because we need to emulate
some syscalls differently.
1998-03-05 04:20:44 +00:00
thorpej
53e3bf87b9
Fix think'o in last kcopy() change.
1998-03-05 02:10:57 +00:00
thorpej
df1fcaa8e3
Rename NetBSD/news to NetBSD/newsmips.
1998-03-04 22:26:35 +00:00
thorpej
157b712178
Rename NetBSD/news to NetBSD/newsmips.
1998-03-04 22:14:13 +00:00
augustss
775d60ecd7
Use lower case "agc" for consistency.
1998-03-04 19:38:28 +00:00