Commit Graph

25 Commits

Author SHA1 Message Date
cgd 7b2afa7fe6 incorporate changes from 0-9-base to 0-9-ALPHA 1993-07-28 02:20:34 +00:00
deraadt 80dc38edb3 documentation error 1993-07-08 08:22:17 +00:00
deraadt 9bff90a5c1 added a timeout debugging mode to wd.c so that people can see how slow
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
deraadt d670635e8b ok, 5 second command timeouts.. 1993-07-07 01:05:42 +00:00
deraadt 86999439b2 number of changes:
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
   pause accepted from controller (some controllers have some commands that are
   actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
deraadt 2cb34d6d65 added a missing {/} pair that barsoom seems to have taken out, but
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
deraadt 3322c7b691 all timeout code now calls DELAY() so the timeout delays are the same
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
deraadt ed61b76822 increased the timeout inside wdcommand(). Some controllers impliment some
commands very slowly.
1993-07-05 00:08:27 +00:00
cgd d1ed63195d fix the divide-by-zero problem w/old disks. this patch is ws's "fault." 1993-06-18 20:45:35 +00:00
deraadt 2adecf84f6 1. It is now possible to build a kernel that does not have a pc0 device driver.
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:52 +00:00
cgd 30177b538f add rcsids to everything and clean up headers 1993-05-22 07:56:12 +00:00
deraadt e34f239662 First cut at cpu independent disklabels.
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
deraadt 545cc18754 This patch allows the wd device driver to tell how big the disks are on
WD1007-derived controllers. In this example, wdc0 is a WD1007-clone,
and wdc1 is a WD1003-clone. WD1007 controllers are generally ESDI
and IDE controllers.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wd0 at wdc0 targ 0: 322MB 1224 cyl, 15 head, 36 sec <disktype>
wdc1 at 0x170-0x17f irq 7 on isa
wd2 at wdc1 targ 0: (unknown size) <disktype>
1993-05-10 05:53:22 +00:00
deraadt 5ae997897e i thought i deleted this line before! 1993-05-09 04:25:48 +00:00
deraadt a0bcb17e60 support for making dev->id_alive be set, this is for iostat to
find disk devices. wee bit of a kludge. sub-device attach()
routines must now return 1 for successful attach(), 0 otherwise.
Other bsd's do this too..
1993-05-04 08:27:29 +00:00
deraadt e2a9eb19a4 slight code quality improvement. not related to the bug with very
old controllers or disks! :-)
1993-04-18 10:03:20 +00:00
deraadt fbecd3e987 Once more: some changes to the ioconf.c structure. It will now handle
devices hanging off controllers, any kind of controller.
A device on isa0 is called at probe(self), then attach(self)
A controller on isa0 is called at probe(self), then all it's children with
    defined unit numbers are initialized by calling attach(subdev); next all
    subdevices with unit ? are initialized by calling attach(sundev).
Almost all device entry points is now like the vax/sun model (intr being
the weird one)
1993-04-15 07:52:08 +00:00
deraadt bf6814fb30 wd driver would fail on calling wdgetctlr() for older drives and
controllers. New behaviour is that if the standard method fails, try
to recalibrate the drive. Success means the drive exists.  patch by
hpeyerl@novatel.cuc.ab.ca (who owns several of these historical
artifacts)
1993-04-15 06:39:00 +00:00
deraadt f262b564a2 new scsi subsystem.
changes also in config/mkioconf.c & sys/scsi/*
1993-04-12 08:17:23 +00:00
cgd c2176edbac have probe return size of io space on successful return, rather
than simply 1.
1993-04-09 16:25:07 +00:00
deraadt b9bd4b25de dmesg output at boottime now tries to print out information as
soon as it is available. The output looks much more like Sunos.
1993-04-08 08:26:46 +00:00
deraadt a2b4863160 ripped out a message 1993-04-06 12:09:55 +00:00
deraadt 9b67a6d7ad Mod-barsoom wd additions. config program + kernel config files changed too.
fd support had to change slightly too.
1993-04-06 10:06:28 +00:00
cgd e541169ce2 after 0.2.2 "stable" patches applied 1993-03-21 18:04:42 +00:00
cgd 61f282557f initial import of 386bsd-0.1 sources 1993-03-21 09:45:37 +00:00